v2026.05.0

[Alexander Shiyan]

Here is output with lowlevel debug:
DDR 03ea844c5d typ 24/09/03-10:42:57,fwver: v1.23
In
...
out
>rockchip-dmc: rockchip_sdram_size(reg2=1000ea01, reg3=30000031)
rockchip-dmc: rank 2 cs0_col 10 cs1_col 10 bk 3 cs0_row 17 cs1_row 17
bw 2 row_3_4 0
rockchip-dmc: rk3568_ram_sizes() = 8589934592
mmu: enabling MMU, ttb @ 0xedf80000
mmu: __arch_remap_range: 0x00000000+0x8000000000 type UNCACHED
mmu: __arch_remap_range: 0x8000000000+0x8000000000 type UNCACHED
mmu: __arch_remap_range: 0x00a00000+0xef600000 type RWX
mmu: __arch_remap_range: 0xee000000+0x2000000 type FAULT
mmu: __arch_remap_range: 0x00b00000+0x60000 type RWX

Everything looks good, but it hangs at this step.

ср, 20 мая 2026 г. в 09:21, Sascha Hauer <s.hauer at pengutronix.de>:
>
> Hi Alexander,
>
> On 2026-05-20 08:15, Alexander Shiyan wrote:
> > Hello Sascha.
> >
> > The first launch of the new release has failed.
> > On the RK3568 platform, BL31 does not start. The size of the final
> > binary has decreased from 1.5 MB
> > to 930 KB - possibly due to the announced compression, but it seems to
> > me that this is too
> > large a reduction...
> > Are there any additional settings/calls required for custom boards in
> > the new release?
>
> No board level adjustments required. I just re-tested the relase on a
> Rock-3a board using rockchip_v8_defconfig. It works here.
>
> The size reduction depends on the size of your firmware binaries. You
> could look at the firmware/*.z files and compare with the original files
> to see if that explains the size reduction. The TF-A and OP-TEE files
> that I use only have around 700KiB in total, so a size reduction of
> 600KiB would be unreasonable in my case.
>
> Do you have any console output to share?
>
> Sascha
>
> --
> Pengutronix e.K.                           |                             |
> Steuerwalder Str. 21                       | http://www.pengutronix.de/  |
> 31137 Hildesheim, Germany                  | Phone: +49-5121-206917-0    |
> Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |