[PATCH 2/2] doc: user: barebox: update typical barebox startup log

[Ahmad Fatoum]

A 12-year old console log is not the best look and it also less useful
now as it differs from what one would normally see on modern platforms.

Replace it with the output from barebox v2026.04.0 on a ROCK-3A instead.

Signed-off-by: Ahmad Fatoum <a.fatoum at pengutronix.de>
---
 Documentation/user/barebox.rst | 36 ++++++++++++++++++++--------------
 1 file changed, 21 insertions(+), 15 deletions(-)

diff --git a/Documentation/user/barebox.rst b/Documentation/user/barebox.rst
index 67cf93eb71c8..4bb33d7db19a 100644
--- a/Documentation/user/barebox.rst
+++ b/Documentation/user/barebox.rst
@@ -275,27 +275,33 @@ This is a typical barebox startup log:
 
 .. code-block:: console
 
-  barebox 2014.06.0-00232-g689dc27-dirty #406 Wed Jun 18 00:25:17 CEST 2014
+  barebox 2026.04.0 #1 2026-04-01T00:00:00+00:00
+  Buildsystem version: DistroKit-2026.04.0
 
 
-  Board: Genesi Efika MX Smartbook
-  detected i.MX51 revision 3.0
-  mc13xxx-spi mc13892 at 00: Found MC13892 ID: 0x0045d0 [Rev: 2.0a]
-  m25p80 m25p800: sst25vf032b (4096 Kbytes)
-  ata0: registered /dev/ata0
-  imx-esdhc 70004000.esdhc: registered as 70004000.esdhc
-  imx-esdhc 70008000.esdhc: registered as 70008000.esdhc
-  imx-ipuv3 40000000.ipu: IPUv3EX probed
-  netconsole: registered as cs2
-  malloc space: 0xabe00000 -> 0xafdfffff (size 64 MiB)
+  Board: Radxa ROCK 3A
+  rockchip-dmc memory-controller.of: Detected memory size: 0x80000000
+  netconsole: registered as netconsole-1
+  psci psci.of: detected version 1.1
+  xHCI xHCI0: USB XHCI 1.10
+  ehci fd800000.usb at fd800000.of: USB EHCI 1.00
+  ehci fd880000.usb at fd880000.of: USB EHCI 1.00
+  rk808 rk8090: chip id: 0x8090
+  dw_mmc fe000000.mmc at fe000000.of: registered as mmc2
+  mdio_bus: miibus0: probed
+  dw_mmc fe2b0000.mmc at fe2b0000.of: registered as mmc1
+  rk3568-dwcmshc-sdhci fe310000.mmc at fe310000.of: registered as mmc0
+  rockchip_saradc fe720000.saradc at fe720000.of: registered as aiodev0
   mmc1: detected SD card version 2.0
   mmc1: registered mmc1
-  barebox-environment environment-sd.7: setting default environment path to /dev/mmc1.barebox-environment
-  running /env/bin/init...
+  state: New state registered 'state'
+  state: Using bucket 0 at 0x00000000
+  malloc space: 0x40300000 -> 0x7fbfffff (size 1017 MiB)
+  found force-builtin environment, using defaultenv
 
-  Hit any key to stop autoboot:  3
+  Hit m for menu or any to stop autoboot:    3
 
-  barebox at Genesi Efika MX Smartbook:/
+  barebox at Radxa ROCK3 Model A:/
 
 Without intervention, barebox will continue booting after 3 seconds. If interrupted
 by pressing a key, you will find yourself at the :ref:`shell <hush>`.
-- 
2.47.3