[PATCH v5 0/3] ARM: socfpga: Enclustra SA2: enable HS USB

[Ahmad Fatoum]

Hello David,

On 3/5/26 3:00 PM, David Picard wrote:
> Enable high-speed USB on Enclustra Mercury+ SA2 module:
> - Enable options in the defconfig.
> - Enable the high-speed USB 2.0 controller in the devicetree.
> - Change 1st stage image compression method to keep it small enough.
> 
> Signed-off-by: David Picard <david.picard at clermont.in2p3.fr>
> ---
> Changes in v5:
> - Rebase on next to take advantage of hotfix in commit 510b79d.

These patches would be picked to next anyway, so a resend to change the
base is unnecessary, unless it actually resolves a conflict.

Cheers,
Ahmad

> - Link to v4: https://lore.kernel.org/r/20260305-b4-sa2-usb-v4-0-52ef8d83fc5e@clermont.in2p3.fr
> 
> Changes in v4:
> - Fix commit message.
> - Link to v3: https://lore.kernel.org/r/20260305-b4-sa2-usb-v3-0-802f52d308ab@clermont.in2p3.fr
> 
> Changes in v3:
> - Add Reviewed-by field.
> - Link to v2: https://lore.kernel.org/r/20260305-b4-sa2-usb-v2-0-cf377c10efd5@clermont.in2p3.fr
> 
> ---
> David Picard (3):
>       ARM: socfpga: Enclustra SA2: add defconfig options
>       ARM: socfpga: Enclustra SA2: enable USB1 HS
>       ARM: socfpga: xload: compress image with xz
> 
>  arch/arm/configs/socfpga-xload_defconfig       |  1 +
>  arch/arm/configs/socfpga_defconfig             | 15 +++++++++++++++
>  arch/arm/dts/socfpga_cyclone5_mercury_sa2.dtsi |  7 +++++++
>  3 files changed, 23 insertions(+)
> ---
> base-commit: 99053a95c9001afbbc5edde7dcef09776833d120
> change-id: 20260304-b4-sa2-usb-8d413bd5c768
> 
> Best regards,

-- 
Pengutronix e.K.                  |                             |
Steuerwalder Str. 21              | http://www.pengutronix.de/  |
31137 Hildesheim, Germany         | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686  | Fax:   +49-5121-206917-5555 |