[PATCH 16/19] usb: ehci: add Marvell EHCI host controller driver

[Sascha Hauer]

On 2026-07-23 15:57, Luca Lauro via B4 Relay wrote:
> From: Luca Lauro <famlauro93l at gmail.com>
> 
> ---
>  drivers/usb/host/Kconfig        |   7 ++
>  drivers/usb/host/Makefile       |  13 +--
>  drivers/usb/host/ehci-marvell.c | 229 ++++++++++++++++++++++++++++++++++++++++
>  3 files changed, 243 insertions(+), 6 deletions(-)
> 
> diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig
> index 58f276cdb4..21bf876d69 100644
> --- a/drivers/usb/host/Kconfig
> +++ b/drivers/usb/host/Kconfig
> @@ -22,6 +22,13 @@ config USB_EHCI_ZYNQ
>  	help
>  	  Enable support for Zynq on-chip EHCI USB controller
>  
> +config USB_EHCI_MARVELL
> +    bool "Marvell USB EHCI driver"
> +	depends on ARCH_MVEBU
> +	depends on USB_EHCI
> +    help
> +      Enable support for Marvell USB EHCI controller
> +
>  config USB_OHCI
>  	bool "OHCI driver"
>  	depends on !MMU && HAS_DMA
> diff --git a/drivers/usb/host/Makefile b/drivers/usb/host/Makefile
> index cbddfbe923..932581d691 100644
> --- a/drivers/usb/host/Makefile
> +++ b/drivers/usb/host/Makefile
> @@ -1,8 +1,9 @@
>  # SPDX-License-Identifier: GPL-2.0-only
> -obj-$(CONFIG_USB_EHCI)		+= ehci-hcd.o
> -obj-$(CONFIG_USB_EHCI_OMAP)	+= ehci-omap.o
> +obj-$(CONFIG_USB_EHCI)			+= ehci-hcd.o
> +obj-$(CONFIG_USB_EHCI_OMAP)		+= ehci-omap.o
>  obj-$(CONFIG_USB_EHCI_ATMEL)	+= ehci-atmel.o
> -obj-$(CONFIG_USB_EHCI_ZYNQ)	+= ehci-zynq.o
> -obj-$(CONFIG_USB_OHCI)		+= ohci-hcd.o
> -obj-$(CONFIG_USB_OHCI_AT91)	+= ohci-at91.o
> -obj-$(CONFIG_USB_XHCI)		+= xhci.o xhci-mem.o xhci-ring.o
> +obj-$(CONFIG_USB_EHCI_ZYNQ)		+= ehci-zynq.o
> +obj-$(CONFIG_USB_EHCI_MARVELL) 	+= ehci-marvell.o
> +obj-$(CONFIG_USB_OHCI)			+= ohci-hcd.o
> +obj-$(CONFIG_USB_OHCI_AT91)		+= ohci-at91.o
> +obj-$(CONFIG_USB_XHCI)			+= xhci.o xhci-mem.o xhci-ring.o
> diff --git a/drivers/usb/host/ehci-marvell.c b/drivers/usb/host/ehci-marvell.c
> new file mode 100644
> index 0000000000..8accfd697d
> --- /dev/null
> +++ b/drivers/usb/host/ehci-marvell.c
> @@ -0,0 +1,229 @@
> +// SPDX-License-Identifier: GPL-2.0-only
> +/*
> + * Marvell Orion / Kirkwood / Armada EHCI host for barebox
> + *
> + * Porting basato su ehci-marvell.c di U-Boot moderno,
> + * adattato al modello ehci_register() di barebox.
> + */

Per favore usa l'inglese nel codice ;)

> +static int marvell_ehci_probe(struct device *dev)
> +{
> +    struct marvell_ehci *priv;
> +    struct resource *iores;
> +    struct ehci_data data;
> +    void __iomem *base;
> +    struct ehci_host *ehci;
> +
> +    priv = xzalloc(sizeof(*priv));
> +    priv->dev = dev;
> +    dev->priv = priv;
> +
> +    iores = dev_request_mem_resource(dev, 0);
> +    if (IS_ERR(iores))
> +        return PTR_ERR(iores);
> +
> +    base = IOMEM(iores->start);
> +    priv->base = base;
> +
> +    memset(&data, 0, sizeof(data));

Easier done with

        struct ehci_data data = {};

Sascha

--
Pengutronix e.K.                           |                             |
Steuerwalder Str. 21                       | http://www.pengutronix.de/  |
31137 Hildesheim, Germany                  | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |