[PATCH v4 0/2] Add generic OP-TEE loading for i.MX6

[Sascha Hauer]

On Mon, 16 Feb 2026 11:36:22 +0100, Fabian Pflug wrote:
> Add a generic way to load OP-TEE from i.MX6 CPU's with config options
> instead of board and lowlevel code.
> 
> If the generic i.MX6 OPTEE firmware gets enabled, it will be loaded
> during boot, if the boardcode is using the imx6*_barebox_entry function
> to start barebox instead of the generic barebox_arm_entry. These will
> make sure, that OP-TEE is configured correctly and if the space for the
> overlay is configured, they will also apply the devicetree overlay
> provided by OP-TEE.
> 
> [...]

Applied, thanks!

[1/2] ARM: i.MX: scratch: add generic init for imx
      https://git.pengutronix.de/cgit/barebox/commit/?id=f4f94c589dab (link may not be stable)
[2/2] ARM: i.MX6: load optee in PBL before barebox proper
      https://git.pengutronix.de/cgit/barebox/commit/?id=3f676490856c (link may not be stable)

Best regards,
-- 
Sascha Hauer <s.hauer at pengutronix.de>