[PATCH] clk: rockchip rk3588: configure CPLL in driver

[Alexander Shiyan]

Hello.

PLL_PPLL -> PLL_CPLL ?

пн, 27 окт. 2025 г. в 17:16, Sascha Hauer <s.hauer at pengutronix.de>:
>
> The rk3588 CPLL should be configured to 1.5GHz and 09c87c85e0 ("ARM:
> dts: rockchip: Set CPLL frequency for RK3588") does this. It does it
> however after the assigned-clocks/assigned-clock-rates properties of the
> "rockchip,rk3588-cru" node have been evaluated which contain a setting
> of CLK_150M_SRC which is a child clock of the CPLL.  Configuring the
> CPLL after CLK_150M_SRC alters the setting of the just configured 150M
> clock again.
>
> We must make sure to configure the CPLL before its child clocks. For
> this we could overwrite the assigned-* properties in the
> "rockchip,rk3588-cru" node, but with that we would miss future updates
> to this property, so configure the CPLL in the driver code instead right
> before we call into of_clk_add_provider().
>
> Fixes: 09c87c85e0 ("ARM: dts: rockchip: Set CPLL frequency for RK3588")
> Signed-off-by: Sascha Hauer <s.hauer at pengutronix.de>
> ---
>  arch/arm/dts/rk3588.dtsi          | 3 ---
>  drivers/clk/rockchip/clk-rk3588.c | 7 +++++++
>  2 files changed, 7 insertions(+), 3 deletions(-)
>
> diff --git a/arch/arm/dts/rk3588.dtsi b/arch/arm/dts/rk3588.dtsi
> index 42d692a9bd..416700cf0e 100644
> --- a/arch/arm/dts/rk3588.dtsi
> +++ b/arch/arm/dts/rk3588.dtsi
> @@ -1,9 +1,6 @@
>  // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
>
>  / {
> -       assigned-clocks = <&cru PLL_CPLL>;
> -       assigned-clock-rates = <1500000000>;
> -
>         dmc: memory-controller {
>                 compatible = "rockchip,rk3588-dmc";
>                 rockchip,pmu = <&pmu1grf>;
> diff --git a/drivers/clk/rockchip/clk-rk3588.c b/drivers/clk/rockchip/clk-rk3588.c
> index 5aecfb3b1b..fcf95131df 100644
> --- a/drivers/clk/rockchip/clk-rk3588.c
> +++ b/drivers/clk/rockchip/clk-rk3588.c
> @@ -2500,6 +2500,13 @@ static void __init rk3588_clk_init(struct device_node *np)
>
>         rockchip_register_restart_notifier(ctx, RK3588_GLB_SRST_FST);
>
> +       /*
> +        * CPLL must run at 1.5GHz. Do this here instead via assigned-clocks
> +        * in the device tree so that we do not have to overwrite the properties
> +        * in the upstream device tree.
> +        */
> +       clk_set_rate(ctx->clk_data.clks[PLL_PPLL], 1500000000);
> +
>         rockchip_clk_of_add_provider(np, ctx);
>  }
>
> --
> 2.47.3
>