[PATCH 3/4] lib: hexdump: make use of pr_debug

[Marco Felsch]

On 25-10-20, Sascha Hauer wrote:
> On Fri, Oct 17, 2025 at 02:03:35PM +0200, Marco Felsch wrote:
> > The hexdump library was ported from Linux which supports different
> > printk() level. Because the barebox print* facility is different
> > compared to the one from Linux the barebox printk() doesn't support
> > levels. Therefore the level is always set to an empty string.
> > 
> > Furthermore all barebox printk() calls aren't recorded by the internal
> > barebox_logbuf because they are mostly used for command prints. Linux on
> > the other hand record each printk() print.
> > 
> > Not recording the output can be an issue on systems which don't have a
> > hw-console but a USB-ACM console, because the hexdump call may already
> > occurred before the console was ready.
> > 
> > Make use of pr_debug() instead to record the output within the
> > barebox_logbuf to be available later on via dmesg. Using pr_debug()
> > should be fine since it is mostly used for debugging/development
> > purpose.
> > 
> > Signed-off-by: Marco Felsch <m.felsch at pengutronix.de>
> > ---
> >  lib/hexdump.c | 9 +++------
> >  1 file changed, 3 insertions(+), 6 deletions(-)
> > 
> > diff --git a/lib/hexdump.c b/lib/hexdump.c
> > index 940c4eec64e9..ab5e3cf727ec 100644
> > --- a/lib/hexdump.c
> > +++ b/lib/hexdump.c
> > @@ -284,16 +284,13 @@ void dev_print_hex_dump(struct device *dev, const char *level,
> >  
> >  		switch (prefix_type) {
> >  		case DUMP_PREFIX_ADDRESS:
> > -			printk("%s%s%s%p: %s\n", level, name, prefix_str,
> > -			       ptr + i, linebuf);
> > +			pr_debug("%s%s%p: %s\n", name, prefix_str, ptr + i, linebuf);
> 
> pr_debug is only compiled in when DEBUG is defined. This means you have
> to add a "#define DEBUG" in lib/hexdump.c to make the messages visible
> printed in another file, or alternatively have to define DEBUG globally.

Yep, this is true and I forgot about that drawback :/

> I think we should rather replace the const char *level argument with a
> unsigned int level argument expecting one of MSG_* and use pr_print() here.

What about keeping the Linux API but converting it back to int?

Regards,
  Marco


> 
> Sascha
> 
> -- 
> Pengutronix e.K.                           |                             |
> Steuerwalder Str. 21                       | http://www.pengutronix.de/  |
> 31137 Hildesheim, Germany                  | Phone: +49-5121-206917-0    |
> Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |
>