[PATCH] ARM: k3: am62l: disable ethernet by default

[Sascha Hauer]

Disable ethernet by default and enable it on the boards that actually
have ethernet supported.

Signed-off-by: Sascha Hauer <s.hauer at pengutronix.de>
---
 arch/arm/dts/k3-am62l-main.dtsi | 3 +++
 arch/arm/dts/k3-am62l3-evm.dts  | 3 +++
 2 files changed, 6 insertions(+)

diff --git a/arch/arm/dts/k3-am62l-main.dtsi b/arch/arm/dts/k3-am62l-main.dtsi
index 267664eecd..aed1d288f7 100644
--- a/arch/arm/dts/k3-am62l-main.dtsi
+++ b/arch/arm/dts/k3-am62l-main.dtsi
@@ -723,6 +723,7 @@ cpsw3g: ethernet at 8000000 {
 		clocks = <&scmi_clk 9>;
 		clock-names = "fck";
 		power-domains = <&scmi_pds 3>;
+		status = "disabled";
 		dmas = <&main_pktdma 0xc600 15>,
 			   <&main_pktdma 0xc601 15>,
 			   <&main_pktdma 0xc602 15>,
@@ -745,6 +746,7 @@ cpsw_port1: port at 1 {
 				label = "port1";
 				phys = <&phy_gmii_sel 1>;
 				ti,syscon-efuse = <&cpsw_mac_syscon 0x0>;
+				status = "disabled";
 			};
 
 			cpsw_port2: port at 2 {
@@ -752,6 +754,7 @@ cpsw_port2: port at 2 {
 				ti,mac-only;
 				label = "port2";
 				phys = <&phy_gmii_sel 2>;
+				status = "disabled";
 			};
 		};
 
diff --git a/arch/arm/dts/k3-am62l3-evm.dts b/arch/arm/dts/k3-am62l3-evm.dts
index 921b58cad2..6751c71c3b 100644
--- a/arch/arm/dts/k3-am62l3-evm.dts
+++ b/arch/arm/dts/k3-am62l3-evm.dts
@@ -113,17 +113,20 @@ eeprom at 51 {
 };
 
 &cpsw3g {
+	status = "okay";
 	pinctrl-names = "default";
 	pinctrl-0 = <&rgmii1_pins_default>,
 		    <&rgmii2_pins_default>;
 };
 
 &cpsw_port1 {
+	status = "okay";
 	phy-mode = "rgmii-rxid";
 	phy-handle = <&cpsw3g_phy0>;
 };
 
 &cpsw_port2 {
+	status = "okay";
 	phy-mode = "rgmii-rxid";
 	phy-handle = <&cpsw3g_phy1>;
 };
-- 
2.47.3