[PATCH 11/30] mci: sdhci: add support for struct mci_data::timeout_ns

[Ahmad Fatoum]

With tuning sequences, we will want to associate the busy timeout with
the struct mci_data, so add a timeout_ns member to it like Linux does.

Signed-off-by: Ahmad Fatoum <a.fatoum at pengutronix.de>
---
 drivers/mci/sdhci.c | 21 ++++++++++++---------
 drivers/mci/sdhci.h |  2 +-
 include/mci.h       |  1 +
 3 files changed, 14 insertions(+), 10 deletions(-)

diff --git a/drivers/mci/sdhci.c b/drivers/mci/sdhci.c
index d0caee22f2f7..61934bcad937 100644
--- a/drivers/mci/sdhci.c
+++ b/drivers/mci/sdhci.c
@@ -813,11 +813,10 @@ void sdhci_enable_clk(struct sdhci *host, u16 clk)
 int sdhci_wait_idle(struct sdhci *host, struct mci_cmd *cmd, struct mci_data *data)
 {
 	u32 mask;
-	unsigned timeout_ms;
+	u64 timeout_ns;
 	int ret;
 
 	mask = SDHCI_CMD_INHIBIT_CMD;
-	timeout_ms = SDHCI_CMD_DEFAULT_BUSY_TIMEOUT_MS;
 
 	if (data || (cmd && (cmd->resp_type & MMC_RSP_BUSY)))
 		mask |= SDHCI_CMD_INHIBIT_DATA;
@@ -825,10 +824,14 @@ int sdhci_wait_idle(struct sdhci *host, struct mci_cmd *cmd, struct mci_data *da
 	if (cmd && cmd->cmdidx == MMC_CMD_STOP_TRANSMISSION)
 		mask &= ~SDHCI_CMD_INHIBIT_DATA;
 
-	if (cmd && cmd->busy_timeout != 0)
-		timeout_ms = cmd->busy_timeout;
+	if (data && data->timeout_ns != 0)
+		timeout_ns = data->timeout_ns;
+	else if (cmd && cmd->busy_timeout != 0)
+		timeout_ns = cmd->busy_timeout * (u64)NSEC_PER_MSEC;
+	else
+		timeout_ns = SDHCI_CMD_DEFAULT_BUSY_TIMEOUT_NS;
 
-	ret = wait_on_timeout(timeout_ms * MSECOND,
+	ret = wait_on_timeout(timeout_ns,
 			!(sdhci_read32(host, SDHCI_PRESENT_STATE) & mask));
 
 	if (ret) {
@@ -843,19 +846,19 @@ int sdhci_wait_idle(struct sdhci *host, struct mci_cmd *cmd, struct mci_data *da
 int sdhci_wait_idle_data(struct sdhci *host, struct mci_cmd *cmd)
 {
 	u32 mask;
-	unsigned timeout_ms;
+	unsigned timeout_ns;
 	int ret;
 
 	mask = SDHCI_CMD_INHIBIT_CMD | SDHCI_CMD_INHIBIT_DATA;
-	timeout_ms = SDHCI_CMD_DEFAULT_BUSY_TIMEOUT_MS;
+	timeout_ns = SDHCI_CMD_DEFAULT_BUSY_TIMEOUT_NS;
 
 	if (cmd && cmd->cmdidx == MMC_CMD_STOP_TRANSMISSION)
 		mask &= ~SDHCI_CMD_INHIBIT_DATA;
 
 	if (cmd && cmd->busy_timeout != 0)
-		timeout_ms = cmd->busy_timeout;
+		timeout_ns = cmd->busy_timeout;
 
-	ret = wait_on_timeout(timeout_ms * MSECOND,
+	ret = wait_on_timeout(timeout_ns,
 			!(sdhci_read32(host, SDHCI_PRESENT_STATE) & mask));
 
 	if (ret) {
diff --git a/drivers/mci/sdhci.h b/drivers/mci/sdhci.h
index d3b681153134..d3cb45c36248 100644
--- a/drivers/mci/sdhci.h
+++ b/drivers/mci/sdhci.h
@@ -201,7 +201,7 @@
 #define SDHCI_MAX_DIV_SPEC_200	256
 #define SDHCI_MAX_DIV_SPEC_300	2046
 
-#define SDHCI_CMD_DEFAULT_BUSY_TIMEOUT_MS 10
+#define SDHCI_CMD_DEFAULT_BUSY_TIMEOUT_NS	(10 * NSEC_PER_MSEC)
 
 struct sdhci {
 	u32 (*read32)(struct sdhci *host, int reg);
diff --git a/include/mci.h b/include/mci.h
index 56527f956802..d3b855f530fc 100644
--- a/include/mci.h
+++ b/include/mci.h
@@ -513,6 +513,7 @@ struct mci_data {
 	unsigned flags;		/**< refer MMC_DATA_* to define direction */
 	unsigned blocks;	/**< block count to handle in this command */
 	unsigned blocksize;	/**< block size in bytes (mostly 512) */
+	unsigned timeout_ns;	/**< data timeout in ns */
 };
 
 enum mci_timing {
-- 
2.39.5