[PATCH master] video: ssd1307fb: set default mode

[Sascha Hauer]

On Thu, 20 Mar 2025 21:30:57 +0100, Ahmad Fatoum wrote:
> The framebuffer support will refuse modification of the fbX.enable
> parameter if there are no modes. The ssd1307fb is the only driver
> that has no provisions for populating modes and thus always runs
> into this case.
> 
> The display is normally used as a small framebuffer console and the
> frame buffer console support will call fb_enable sidestepping the check
> in the device parameter, which caused the issue to fly under the radar
> so far. If used without framebuffer console, however, the problem
> becomes quickly apparent.
> 
> [...]

Applied, thanks!

[1/1] video: ssd1307fb: set default mode
      https://git.pengutronix.de/cgit/barebox/commit/?id=1f39c0443fb2 (link may not be stable)

Best regards,
-- 
Sascha Hauer <s.hauer at pengutronix.de>