[PATCH 2/2] ARM: multi_v8_defconfig: enable k3 drivers

[Sascha Hauer]

The K3 architecture is enabled in multi_v8_defconfig. Enable the K3
specific drivers to make it more usable.

Signed-off-by: Sascha Hauer <s.hauer at pengutronix.de>
---
 arch/arm/configs/multi_v8_defconfig | 8 +++++++-
 1 file changed, 7 insertions(+), 1 deletion(-)

diff --git a/arch/arm/configs/multi_v8_defconfig b/arch/arm/configs/multi_v8_defconfig
index b1e66e85f4..78964990a9 100644
--- a/arch/arm/configs/multi_v8_defconfig
+++ b/arch/arm/configs/multi_v8_defconfig
@@ -155,6 +155,7 @@ CONFIG_DRIVER_SERIAL_NS16550=y
 CONFIG_DRIVER_SERIAL_CADENCE=y
 CONFIG_DRIVER_SERIAL_LPUART32=y
 CONFIG_VIRTIO_CONSOLE=y
+CONFIG_DRIVER_NET_TI_K3_AM65_CPSW_NUSS=y
 CONFIG_DRIVER_NET_DESIGNWARE_IMX8=y
 CONFIG_DRIVER_NET_DESIGNWARE_ROCKCHIP=y
 CONFIG_DRIVER_NET_FEC_IMX=y
@@ -180,6 +181,7 @@ CONFIG_DRIVER_SPI_IMX=y
 CONFIG_SPI_NXP_FLEXSPI=y
 CONFIG_I2C_GPIO=y
 CONFIG_I2C_IMX=y
+CONFIG_I2C_OMAP=y
 CONFIG_I2C_RK3X=y
 CONFIG_I2C_MUX=y
 CONFIG_I2C_MUX_PCA954x=y
@@ -207,10 +209,11 @@ CONFIG_SOUND=y
 CONFIG_MCI=y
 CONFIG_MCI_MMC_BOOT_PARTITIONS=y
 CONFIG_MCI_DW=y
-CONFIG_MCI_ROCKCHIP_DWCMSHC=y
 CONFIG_MCI_SUNXI_SMHC=y
+CONFIG_MCI_ROCKCHIP_DWCMSHC=y
 CONFIG_MCI_IMX_ESDHC=y
 CONFIG_MCI_ARASAN=y
+CONFIG_MCI_AM654=y
 CONFIG_COMMON_CLK_SCMI=y
 CONFIG_MFD_ACT8846=y
 CONFIG_RAVE_SP_CORE=y
@@ -230,8 +233,11 @@ CONFIG_WATCHDOG_DW=y
 CONFIG_WATCHDOG_IMX=y
 CONFIG_WATCHDOG_IMXULP=y
 CONFIG_RAVE_SP_WATCHDOG=y
+CONFIG_K3_RTI_WDT=y
 CONFIG_HWRNG=y
 CONFIG_HW_RANDOM_VIRTIO=y
+CONFIG_DMADEVICES=y
+CONFIG_TI_K3_UDMA=y
 CONFIG_GPIO_PCA953X=y
 CONFIG_GPIO_ZYNQ=y
 CONFIG_PINCTRL_SINGLE=y
-- 
2.39.5