[PATCH 04/13] ARM: k3: r5: add proper error handling

[Marco Felsch]

On 25-02-28, Sascha Hauer wrote:
> Add missing error handling in the image loading code. Properly check for
> errors and panic when mandatory binaries are missing instead of blindly
> continuing.
> 
> Signed-off-by: Sascha Hauer <s.hauer at pengutronix.de>
> ---
>  arch/arm/mach-k3/r5.c | 57 ++++++++++++++++++++++++++++-----------------------
>  1 file changed, 31 insertions(+), 26 deletions(-)
> 
> diff --git a/arch/arm/mach-k3/r5.c b/arch/arm/mach-k3/r5.c
> index 2418e9ae73..e12c888afa 100644
> --- a/arch/arm/mach-k3/r5.c
> +++ b/arch/arm/mach-k3/r5.c
> @@ -283,7 +283,7 @@ static int load_fip(const char *filename, off_t offset)
>  	return 0;
>  }
>  
> -static void do_dfu(void)
> +static int do_dfu(void)
>  {
>  	struct usbgadget_funcs funcs = {};
>  	int ret;
> @@ -293,37 +293,24 @@ static void do_dfu(void)
>  	funcs.dfu_opts = "/fip.img(fip)cs";
>  
>  	ret = usbgadget_prepare_register(&funcs);
> -	if (ret)
> -		goto err;
> +	if (ret) {
> +		pr_err("DFU failed with: %pe\n", ERR_PTR(ret));
> +		return ret;
> +	}
>  
>  	while (1) {
>  		ret = stat("/fip.img", &s);
>  		if (!ret) {
>  			printf("Downloaded FIP image, DFU done\n");
> -			load_fip("/fip.img", 0);
> -			break;
> +			ret = load_fip("/fip.img", 0);
> +			if (!ret)
> +				return 0;
>  		}
>  
>  		command_slice_release();
>  		mdelay(50);
>  		command_slice_acquire();
>  	};
> -
> -	return;
> -
> -err:
> -	pr_err("DFU failed with: %pe\n", ERR_PTR(ret));
> -}
> -
> -static int load_images(void)
> -{
> -	int err;
> -
> -	err = load_fip("/boot/k3.fip", 0);
> -	if (!err)
> -		return 0;
> -
> -	return 0;
>  }

Removing load_images should go into patch-3.

>  
>  static int load_fip_emmc(void)
> @@ -332,6 +319,7 @@ static int load_fip_emmc(void)
>  	struct mci *mci;
>  	char *fname;
>  	const char *mmcdev = "mmc0";
> +	int ret;

Nit: Sometimes you do use ret, sometimes err. I would like to align it
if possible.

Rest LGTM.

Reviewed-by: Marco Felsch <m.felsch at pengutronix.de>

Regards,
  Marco

>  
>  	device_detect_by_name(mmcdev);
>  
> @@ -348,11 +336,11 @@ static int load_fip_emmc(void)
>  
>  	fname = xasprintf("/dev/%s.boot%d", mmcdev, bootpart - 1);
>  
> -	load_fip(fname, K3_EMMC_BOOTPART_TIBOOT3_BIN_SIZE);
> +	ret = load_fip(fname, K3_EMMC_BOOTPART_TIBOOT3_BIN_SIZE);
>  
>  	free(fname);
>  
> -	return 0;
> +	return ret;
>  }
>  
>  static int k3_r5_start_image(void)
> @@ -365,11 +353,28 @@ static int k3_r5_start_image(void)
>  	struct rproc *arm64_rproc;
>  
>  	if (IS_ENABLED(CONFIG_USB_GADGET_DFU) && bootsource_get() == BOOTSOURCE_SERIAL)
> -		do_dfu();
> +		err = do_dfu();
>  	else if (k3_boot_is_emmc())
> -		load_fip_emmc();
> +		err = load_fip_emmc();
>  	else
> -		load_images();
> +		err = load_fip("/boot/k3.fip", 0);
> +
> +	if (err) {
> +		pr_crit("Unable to load FIP image\n");
> +		panic("Stop booting\n");
> +	}
> +
> +	if (!have_bl31)
> +		panic("No TFA found in FIP image\n");
> +
> +	if (!have_bl32)
> +		pr_info("No OP-TEE found. Continuing without\n");
> +
> +	if (!have_bl33)
> +		panic("No bl33 found in FIP image\n");
> +
> +	if (!k3_ti_dm)
> +		panic("No ti-dm binary found\n");
>  
>  	ti_sci = ti_sci_get_handle(NULL);
>  	if (IS_ERR(ti_sci))
> 
> -- 
> 2.39.5
> 
> 
>