[PATCH] spi: Probe spi devices without alias

[Sascha Hauer]

Hi Jonas,

On Tue, Jun 10, 2025 at 05:24:56PM +0200, Jonas Rebmann wrote:
> Continue probing spi connected devices without an alias. Setting bus_num
> to -1 will assign numbers automatically.
> 
> Signed-off-by: Jonas Rebmann <jre at pengutronix.de>
> ---
>  drivers/spi/imx_spi.c | 7 ++++---
>  1 file changed, 4 insertions(+), 3 deletions(-)
> 
> diff --git a/drivers/spi/imx_spi.c b/drivers/spi/imx_spi.c
> index bfb4b413ebab0e62e92f61db52a866a1d55b9ae3..14c4baada8e03ce1b38031afc68de7b261d43e78 100644
> --- a/drivers/spi/imx_spi.c
> +++ b/drivers/spi/imx_spi.c
> @@ -604,9 +604,10 @@ static int imx_spi_probe(struct device *dev)
>  		imx->cs_array = pdata->chipselect;
>  	} else if (IS_ENABLED(CONFIG_OFDEVICE)) {
>  		ret = of_alias_get_id(dev->of_node, "spi");
> -		if (ret < 0)
> -			goto err_free;
> -		master->bus_num = ret;
> +		if (ret >= 0)
> +			master->bus_num = ret;
> +		else
> +			master->bus_num = -1;

Calling of_alias_get_id() is unnecessary. Just set bus_num = -1, in that
case this is in spi_register_controller() should trigger:

	if ((ctrl->bus_num < 0) && ctrl->dev->of_node)
		ctrl->bus_num = of_alias_get_id(ctrl->dev->of_node, "spi");

Sascha

-- 
Pengutronix e.K.                           |                             |
Steuerwalder Str. 21                       | http://www.pengutronix.de/  |
31137 Hildesheim, Germany                  | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |