[PATCH 00/16] ARM: stm32mp: add MIPI DSI support
Ahmad Fatoum
a.fatoum at barebox.org
Thu Jun 5 14:07:10 PDT 2025
This enables barebox to make use of the MIPI DSI display on the DK2.
The RK35xx also has a Designware MIPI-DSI host and there's already VOP2
support, so that will likely follow in future.
Ahmad Fatoum (16):
driver: bus: embed bus driver node into bus
driver: switch busses to device class
driver: factor out bus definitions into separate header
driver: bus: add helpers for finding devices in busses
drive: bus: make use of new bus_find_device helper
of: implement of_alias_from_compatible
video: vpl: fix potential read of uninitialized variable
video: vpl: factor out vpl_for_each
video: vpl: handle missing struct vpl::ioctl gracefully
video: vpl: add vpl_bridge abstraction
video: factor out drm_mode_vrefresh
video: add base MIPI DSI support
video: add Designware MIPI-DSI support
video: add STM32 MIPI DSI video driver
video: add support for Orise Technology otm8009a panel
ARM: stm32mp: dk2: enable MIPI-DSI display by default
arch/arm/boards/stm32mp15xx-dkx/Makefile | 1 +
arch/arm/boards/stm32mp15xx-dkx/board.c | 3 +
.../defaultenv-stm32mp15xx-dkx/init/splash | 18 +
arch/arm/configs/stm32mp_defconfig | 18 +-
commands/devinfo.c | 2 +-
common/tlv/bus.c | 4 +-
drivers/amba/bus.c | 2 +-
drivers/base/bus.c | 68 +-
drivers/base/driver.c | 2 +-
drivers/efi/efi-device.c | 17 +-
drivers/i2c/i2c.c | 6 +-
drivers/mci/mci-core.c | 14 +-
drivers/net/phy/mdio_bus.c | 6 +-
drivers/net/phy/phy.c | 7 +-
drivers/of/base.c | 31 +
drivers/tee/tee_core.c | 7 +-
drivers/tee/tee_private.h | 2 -
drivers/usb/gadget/udc/core.c | 3 +
drivers/video/Kconfig | 35 +
drivers/video/Makefile | 5 +
drivers/video/backlight.c | 7 +-
drivers/video/drm/Makefile | 2 +
drivers/video/drm/drm_modes.c | 67 +
drivers/video/dw_mipi_dsi.c | 1042 ++++++++++
drivers/video/mipi_dsi.c | 1730 +++++++++++++++++
drivers/video/panel-orisetech-otm8009a.c | 505 +++++
drivers/video/rockchip/rockchip_drm_vop2.c | 13 -
drivers/video/stm32_dsi.c | 457 +++++
drivers/video/vpl.c | 91 +-
drivers/w1/w1.c | 4 +-
include/driver.h | 33 +-
include/i2c/i2c.h | 5 +-
include/linux/device.h | 22 -
include/linux/device/bus.h | 80 +
include/linux/gpio/consumer.h | 3 +
include/linux/phy.h | 6 +-
include/module.h | 26 +
include/of.h | 1 +
include/video/backlight.h | 15 +-
include/video/drm/drm_connector.h | 2 +
include/video/drm/drm_modes.h | 2 +
include/video/dw_mipi_dsi.h | 81 +
include/video/mipi_dsi.h | 618 ++++++
include/video/vpl.h | 15 +
44 files changed, 4946 insertions(+), 132 deletions(-)
create mode 100755 arch/arm/boards/stm32mp15xx-dkx/defaultenv-stm32mp15xx-dkx/init/splash
create mode 100644 drivers/video/drm/Makefile
create mode 100644 drivers/video/drm/drm_modes.c
create mode 100644 drivers/video/dw_mipi_dsi.c
create mode 100644 drivers/video/mipi_dsi.c
create mode 100644 drivers/video/panel-orisetech-otm8009a.c
create mode 100644 drivers/video/stm32_dsi.c
create mode 100644 include/linux/device/bus.h
create mode 100644 include/video/dw_mipi_dsi.h
create mode 100644 include/video/mipi_dsi.h
--
2.39.5
More information about the barebox
mailing list