handoff data
Renaud Barbier
Renaud.Barbier at ametek.com
Tue Jul 22 04:08:43 PDT 2025
On our LS1046A based board (v2022.03) we used to pass the results of memory tests in the PBL through the OCRAM to the barebox load.
I see there is handoff data support.
In my board lowlevel.c code, I have added the call:
handoff_add_arm_machine(0x12345678);
And then try to read it back from device_initcall:
machine = handoff_data_get_entry(HANDOFF_DATA_ARM_MACHINE, &hsize);
printf("machine = %ld, %p\n", hsize, machine);
However, both the machine pointer and size are set to 0.
Am I missing something in the process?
Cheers,
Renaud
More information about the barebox
mailing list