Subject: [PATCH 0/1] Initial NVME storage erase operation

[Ahmad Fatoum]

Hello Renaud,

On 16.01.25 11:52, Renaud Barbier wrote:
> This patch introduces the erase entry point for the NVME storage.
> It uses the nvme sanitize command 2 for a low level block erase
> of the entire device as start and end blocks cannot be specified.
> 
> Note that in the current state, the user should first remove existing
> partitions with the command 'parted rmpart' as they will stay dangling
> in barebox device nodes and mount points.

Thanks for your patch. Your mailer seems to have mangled the series
a bit:
   - The patch is not a reply to the cover letter
   - "Subject: [PATCH 0/1]" ends up in the commit message title

I think Sascha can fix it up on apply, but jfyi, you can use b4 with barebox
now, including the kernel.org web relay:

https://b4.docs.kernel.org/en/latest/contributor/send.html#authenticating-with-the-web-submission-endpoint

This takes care to send patches unmangled by corporate IT.

Cheers,
Ahmad
  

> 
> Renaud Barbier (1):
>   nvme: add erase operation through sanitize command
> 
>  drivers/nvme/host/core.c | 82 ++++++++++++++++++++++++++++++++++++++++
>  drivers/nvme/host/pci.c  |  2 +
>  include/nvme/types.h     | 38 +++++++++++++++++++
>  3 files changed, 122 insertions(+)
>  create mode 100644 include/nvme/types.h
> 


-- 
Pengutronix e.K.                           |                             |
Steuerwalder Str. 21                       | http://www.pengutronix.de/  |
31137 Hildesheim, Germany                  | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |