[PATCH v2 18/20] ARM: am625-sk: cleanup board entry

[Sascha Hauer]

We used to genrate a Linux Kernel compatible image that can be started
from U-Boot. This is no longer necessary as we have full 1st stage
support now in barebox. A FIT image to be started from U-Boot can still
be generated with BOARD_GENERIC_FIT.

Signed-off-by: Sascha Hauer <s.hauer at pengutronix.de>
---
 arch/arm/boards/am625-sk/Makefile   |  1 -
 arch/arm/boards/am625-sk/entry.S    | 29 -----------------------------
 arch/arm/boards/am625-sk/lowlevel.c | 13 +++----------
 3 files changed, 3 insertions(+), 40 deletions(-)

diff --git a/arch/arm/boards/am625-sk/Makefile b/arch/arm/boards/am625-sk/Makefile
index 8c45b1e154..8cba450528 100644
--- a/arch/arm/boards/am625-sk/Makefile
+++ b/arch/arm/boards/am625-sk/Makefile
@@ -1,4 +1,3 @@
 pbl-y += lowlevel.o
 obj-y += board.o
-pbl-$(CONFIG_MACH_K3_CORTEX_A) += entry.o
 pbl-$(CONFIG_MACH_K3_CORTEX_R5) += entry-r5.o am625-sk-ddr.o am625sip-sk-ddr.o
diff --git a/arch/arm/boards/am625-sk/entry.S b/arch/arm/boards/am625-sk/entry.S
deleted file mode 100644
index 5fc9297d50..0000000000
--- a/arch/arm/boards/am625-sk/entry.S
+++ /dev/null
@@ -1,29 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-or-later */
-#include <linux/linkage.h>
-#include <asm/barebox-arm64.h>
-#include <asm/image.h>
-
-#define IMAGE_FLAGS \
-	(ARM64_IMAGE_FLAG_PAGE_SIZE_4K << ARM64_IMAGE_FLAG_PAGE_SIZE_SHIFT) | \
-	(ARM64_IMAGE_FLAG_PHYS_BASE << ARM64_IMAGE_FLAG_PHYS_BASE_SHIFT)
-
-.section .text_head_entry_start_vivavis_cu33d
-ENTRY("start_am625_sk")
-	adr x1, 0	   	   /* code0 */
-	b 2f                       /* code1 */
-	.xword 0x80000             /* Image load offset */
-	.xword _barebox_image_size /* Effective Image size */
-	.xword IMAGE_FLAGS	   /* Kernel flags */
-	.xword 0                   /* reserved */
-	.xword 0                   /* reserved */
-	.xword 0                   /* reserved */
-	.ascii ARM64_IMAGE_MAGIC   /* magic number */
-	.int   0                   /* reserved (PE-COFF offset) */
-	.asciz "barebox"	   /* unused for now */
-2:
-	mov sp, x1
-	/* Stack now grows into the 0x80000 image load offset specified
-	 * above. This is more than enough until FDT /memory is decoded.
-	 */
-	b am625_sk
-ENTRY_PROC_END(start_am625_sk)
diff --git a/arch/arm/boards/am625-sk/lowlevel.c b/arch/arm/boards/am625-sk/lowlevel.c
index 5c1c38e325..10da8731ca 100644
--- a/arch/arm/boards/am625-sk/lowlevel.c
+++ b/arch/arm/boards/am625-sk/lowlevel.c
@@ -14,14 +14,10 @@
 
 #include "ddr.h"
 
-/* Called from assembly */
-void am625_sk(void *dtb);
-
-static noinline void am625_sk_continue(void *dtb)
+static noinline void am625_sk_continue(void)
 {
 	unsigned long membase = 0x80000000, memsize;
 	extern char __dtb_z_k3_am625_sk_start[];
-	unsigned int size;
 
 	memsize = am625_sdram_size();
 
@@ -33,13 +29,10 @@ static noinline void am625_sk_continue(void *dtb)
 	if (memsize == SZ_512M)
 		memsize = SZ_512M - 0x04000000; /* substract space needed for TF-A, OP-TEE, ... */
 
-	if (blob_is_valid_fdt_ptr(dtb, membase, memsize, &size))
-		handoff_data_add(HANDOFF_DATA_EXTERNAL_DT, dtb, size);
-
 	barebox_arm_entry(membase, memsize, __dtb_z_k3_am625_sk_start);
 }
 
-void am625_sk(void *dtb)
+ENTRY_FUNCTION_WITHSTACK(start_am625_sk, 0x80800000, r0, r1, r2)
 {
 	putc_ll('>');
 
@@ -49,7 +42,7 @@ void am625_sk(void *dtb)
 
 	setup_c();
 
-	am625_sk_continue(dtb);
+	am625_sk_continue();
 }
 
 static noinline void am625_sk_r5_continue(void)

-- 
2.39.5