[PATCH] soc: k3: Add support for Texas Instruments K3 ESM driver

[Sascha Hauer]

On Fri, 07 Feb 2025 08:20:13 +0100, Sascha Hauer wrote:
> The ESM (Error Signaling Module) is used to route error signals within
> the K3 SoCs somewhat similar to interrupts. The handling for these is
> different though, and can be routed for hardware error handling, to
> be handled by safety processor or just as error interrupts handled
> by the main processor. The u-boot level ESM driver is just used to
> configure the ESM signals so that they get routed to proper destination.
> 
> [...]

Applied, thanks!

[1/1] soc: k3: Add support for Texas Instruments K3 ESM driver
      https://git.pengutronix.de/cgit/barebox/commit/?id=5ab2acff066c (link may not be stable)

Best regards,
-- 
Sascha Hauer <s.hauer at pengutronix.de>