[PATCH 0/9] ARM: K3 updates

[Sascha Hauer]

This series has some updates for the TI K3 architecture.

We add support for bootstrapping boards via USB DFU. This has been sent
earlier, this time booting from eMMC is added as well.

On K3 SoCs we need a bunch of images after the first stage has been
loaded: OP-TEE, ti-dm firmware, TF-A binary and finally a barebox
binary. Until now these are expected as distinct images on the SD cards
FAT partition. This is impractical for booting from eMMC boot partitions
and also DFU boot, so this series adds support for handling a FIP image
containing these binaries.

Also some misc patches like enabling the 32k crystal needed for accurate
RTC frequency

Sascha

Signed-off-by: Sascha Hauer <s.hauer at pengutronix.de>
---
Sascha Hauer (9):
      ARM: k3: Add function to enable 32k crystal
      ARM: k3: add function to detect eMMC boot
      ARM: k3: do not mount /boot when booting from eMMC
      ARM: k3: r5: add USB DFU and eMMC boot support
      ARM: am625-sk: enable 32k crystal
      mci: am654: parse generic mmc node properties
      ARM: k3: limit eMMC frequency to 25MHz
      ARM: am625-sk: put environment on eMMC when booting from it
      serial: omap: Use ttyS as Linux console name

 Documentation/boards/ti-k3.rst       |  47 +++++
 arch/arm/boards/am625-sk/Makefile    |   1 +
 arch/arm/boards/am625-sk/board.c     |  35 ++++
 arch/arm/dts/k3-am625-beagleplay.dts |   4 +
 arch/arm/dts/k3-am625-sk.dts         |  19 ++
 arch/arm/mach-k3/common.c            |  36 ++++
 arch/arm/mach-k3/r5.c                | 367 ++++++++++++++++++++++++++++++++---
 drivers/mci/am654-sdhci.c            |   1 +
 drivers/serial/serial_ns16550.c      |   4 +-
 include/mach/k3/common.h             |   9 +
 10 files changed, 490 insertions(+), 33 deletions(-)
---
base-commit: a40a4c0d054f3b6aac272236c982d24c4ac72eaa
change-id: 20250205-k3-emmc-eaa3df9f3ffd

Best regards,
-- 
Sascha Hauer <s.hauer at pengutronix.de>