[PATCH 1/5] mci: cadence: fix typo and actually build

[Steffen Trumtrar]

All other Kconfig symbols use MCI_* instead of MMC_*. Fix that.
Also, add the cadence-sdhci to the Makefile, so that the driver is build.

Signed-off-by: Steffen Trumtrar <s.trumtrar at pengutronix.de>
---
 drivers/mci/Kconfig  | 2 +-
 drivers/mci/Makefile | 1 +
 2 files changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/mci/Kconfig b/drivers/mci/Kconfig
index 6736e7421c..e7b8afb3b4 100644
--- a/drivers/mci/Kconfig
+++ b/drivers/mci/Kconfig
@@ -259,7 +259,7 @@ config MCI_STM32_SDMMC2
 	  If you have a board based on such a SoC and with a SD/MMC slot,
 	  say Y or M here.
 
-config MMC_CADENCE_SDHCI
+config MCI_CADENCE_SDHCI
 	tristate "SDHCI support for the Cadence SD/SDIO/eMMC controller"
 	select MCI_SDHCI
 	help
diff --git a/drivers/mci/Makefile b/drivers/mci/Makefile
index f76059e7b5..6a3af532a0 100644
--- a/drivers/mci/Makefile
+++ b/drivers/mci/Makefile
@@ -8,6 +8,7 @@ obj-$(CONFIG_MCI_ATMEL)		+= atmel_mci.o atmel_mci_common.o
 obj-$(CONFIG_MCI_ATMEL_SDHCI)	+= atmel-sdhci.o atmel-sdhci-common.o
 obj-$(CONFIG_MCI_BCM283X)	+= mci-bcm2835.o
 obj-$(CONFIG_MCI_BCM283X_SDHOST)	+= bcm2835-sdhost.o
+obj-$(CONFIG_MCI_CADENCE_SDHCI) += cadence-sdhci.o
 obj-$(CONFIG_MCI_DOVE)		+= dove-sdhci.o
 pbl-$(CONFIG_MCI_ATMEL_PBL)	+= atmel_mci_pbl.o atmel_mci_common.o
 pbl-$(CONFIG_MCI_ATMEL_SDHCI_PBL)	+= atmel-sdhci-pbl.o atmel-sdhci-common.o

-- 
2.51.0