[PATCH 6/6] partitions: gpt: refresh partition tables when necessary

[Sascha Hauer]

On Mon, Dec 15, 2025 at 01:47:09PM +0100, Ahmad Fatoum wrote:
> Hi,
> 
> On 12/3/25 4:19 PM, Sascha Hauer wrote:
> > The GPT alternative header must be at the end of the device. When disk
> > images are written to a device this often is not the case which results
> > in warnings:
> > 
> > WARNING: mmc0: GPT:Primary header thinks Alt. header is not at the end of the disk.
> > WARNING: mmc0: GPT:6561831 != 62160895
> > WARNING: mmc0: GPT:Alternate GPT header not at the end of the disk.
> > WARNING: mmc0: GPT:6561831 != 62160895
> > WARNING: mmc0: GPT: Use parted to correct GPT errors.
> > 
> > This patch adds support for automatically rewriting the partition table
> > when this happens. This behaviour is optional and needs to be enabled at
> > compile time with CONFIG_PARTITION_DISK_EFI_REFRESH. Also this is
> > runtime configurable with global.system.gpt_refresh
> > 
> > Link: https://lore.barebox.org/20251128111929.2463263-1-s.hauer@pengutronix.de
> > Signed-off-by: Sascha Hauer <s.hauer at pengutronix.de>
> 
> With below point addressed:
> 
> Reviewed-by: Ahmad Fatoum <a.fatoum at pengutronix.de>
> 
> 
> > -	if (error_found)
> > +	if (error_found) {
> > +		add_gpt_refresh(blk);
> >  		dev_warn(dev, "GPT: Use parted to correct GPT errors.\n");
> 
> With CONFIG_PARTITION_DISK_EFI_REFRESH enabled, I would suggest changing
> this to a dev_info(dev, "GPT: barebox will autocorrect.\n") or something.

We can know that this feature is compiled in, but we don't know yet if it
is actually enabled, so the best we can write is something like:

	dev_info(dev, "GPT: will repair later when global.system.gpt_refresh is true\n");

I added this while applying.

Sascha

-- 
Pengutronix e.K.                           |                             |
Steuerwalder Str. 21                       | http://www.pengutronix.de/  |
31137 Hildesheim, Germany                  | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |