[PATCH 2/4] nvmem: fix device name setting

[Sascha Hauer]

For the nvmem device ID it was only possible to specify NVMEM_DEVID_NONE
which translates to DEVICE_ID_SINGLE or NVMEM_DEVID_AUTO which
translates to DEVICE_ID_DYNAMIC. All other values default to
DEVICE_ID_DYNAMIC.

Explicitly allow to set a fixed device ID so that the caller can fully
specify the name under which the new nvmem device appears. The special
case is when no config->name is given. In this we use "nvmem" as device
name, but we also have to ignore config->id.

Signed-off-by: Sascha Hauer <s.hauer at pengutronix.de>
---
 drivers/nvmem/core.c | 22 +++++++++++++++-------
 1 file changed, 15 insertions(+), 7 deletions(-)

diff --git a/drivers/nvmem/core.c b/drivers/nvmem/core.c
index a96aaf0b5a7215d05e976133aacfee1fdf9c36f7..8e1cf400e5d83ad6d53d21a705913cee72bfd4ab 100644
--- a/drivers/nvmem/core.c
+++ b/drivers/nvmem/core.c
@@ -487,15 +487,23 @@ struct nvmem_device *nvmem_register(const struct nvmem_config *config)
 	if (config->read_only || !config->reg_write || of_property_read_bool(np, "read-only"))
 		nvmem->read_only = true;
 
-	dev_set_name(&nvmem->dev, "%s", config->name ? : "nvmem");
-	switch (config->id) {
-	case NVMEM_DEVID_NONE:
-		nvmem->dev.id = DEVICE_ID_SINGLE;
+	if (config->name) {
+		dev_set_name(&nvmem->dev, "%s", config->name);
+
+		switch (config->id) {
+		case NVMEM_DEVID_NONE:
+			nvmem->dev.id = DEVICE_ID_SINGLE;
+			break;
+		case NVMEM_DEVID_AUTO:
+			nvmem->dev.id = DEVICE_ID_DYNAMIC;
+			break;
+		default:
+			nvmem->dev.id = config->id;
 		break;
-	case NVMEM_DEVID_AUTO:
-	default:
+		}
+	} else {
+		dev_set_name(&nvmem->dev, "nvmem");
 		nvmem->dev.id = DEVICE_ID_DYNAMIC;
-		break;
 	}
 
 	rval = register_device(&nvmem->dev);

-- 
2.47.3