[PATCH 0/4] ARM: k3: fix k3img dependencies

[Sascha Hauer]

On Tue, 02 Dec 2025 16:58:24 +0100, Sascha Hauer wrote:
> This series fixes a dependency problem in the K3 image generation. The
> k3img tool takes several files as input, but only the barebox image is
> actually a dependency, so when (only) one of the other files change the
> final image is not re-generated.
> 
> While at it we can make some input files SoC specific which means we no
> longer have to specify them per board, saving one line per board and
> file in Makefile.k3
> 
> [...]

Applied, thanks!

[1/4] ARM: K3: am62l: don't put sysfwdata into 1st stage image
      https://git.pengutronix.de/cgit/barebox/commit/?id=429f52b9f493 (link may not be stable)
[2/4] ARM: k3: make some firmware files SoC specific
      https://git.pengutronix.de/cgit/barebox/commit/?id=e7189c9722ab (link may not be stable)
[3/4] ARM: k3: am62l: Add dedicated config option for OP-TEE
      https://git.pengutronix.de/cgit/barebox/commit/?id=2711c4ca4fdc (link may not be stable)
[4/4] ARM: k3: am62l: fix dependencies on k3img input files
      https://git.pengutronix.de/cgit/barebox/commit/?id=f1739aa759f0 (link may not be stable)

Best regards,
-- 
Sascha Hauer <s.hauer at pengutronix.de>