[PATCH 1/2] mci: am654-sdhci: Wait for transfer complete interrupt with MMC_RSP_BUSY cmd

[Sascha Hauer]

The MMC_RSP_BUSY flag indicates that we have to wait for the transfer
completion interrupt. Other SDHCI drivers do this, but the am654 driver
missed it.

Signed-off-by: Sascha Hauer <s.hauer at pengutronix.de>
---
 drivers/mci/am654-sdhci.c | 8 ++++++--
 1 file changed, 6 insertions(+), 2 deletions(-)

diff --git a/drivers/mci/am654-sdhci.c b/drivers/mci/am654-sdhci.c
index 24abf10492..34a42be2aa 100644
--- a/drivers/mci/am654-sdhci.c
+++ b/drivers/mci/am654-sdhci.c
@@ -459,7 +459,7 @@ static int am654_sdhci_send_cmd(struct mci_host *mci, struct mci_cmd *cmd,
 				struct mci_data *data)
 {
 	struct am654_sdhci_plat *host = container_of(mci, struct am654_sdhci_plat, mci);
-	u32 command, xfer;
+	u32 mask, command, xfer;
 	int ret;
 	dma_addr_t dma;
 
@@ -469,6 +469,10 @@ static int am654_sdhci_send_cmd(struct mci_host *mci, struct mci_cmd *cmd,
 
 	sdhci_write32(&host->sdhci, SDHCI_INT_STATUS, ~0);
 
+	mask = SDHCI_INT_CMD_COMPLETE;
+	if (cmd->resp_type & MMC_RSP_BUSY)
+		mask |= SDHCI_INT_XFER_COMPLETE;
+
 	sdhci_write8(&host->sdhci, SDHCI_TIMEOUT_CONTROL, 0xe);
 
 	sdhci_setup_data_dma(&host->sdhci, data, &dma);
@@ -481,7 +485,7 @@ static int am654_sdhci_send_cmd(struct mci_host *mci, struct mci_cmd *cmd,
 	sdhci_write32(&host->sdhci, SDHCI_ARGUMENT, cmd->cmdarg);
 	sdhci_write16(&host->sdhci, SDHCI_COMMAND, command);
 
-	ret = sdhci_wait_for_done(&host->sdhci, SDHCI_INT_CMD_COMPLETE);
+	ret = sdhci_wait_for_done(&host->sdhci, mask);
 	if (ret) {
 		sdhci_teardown_data(&host->sdhci, data, dma);
 		goto error;
-- 
2.47.2