[PATCH 2/4] ARM64: configs: multi_v8: disable layerscape temporarily

[Ahmad Fatoum]

Hello Sascha,

On 8/5/25 07:43, Sascha Hauer wrote:
> Hi Ahmad,
> 
> On Wed, Jul 30, 2025 at 07:57:41AM +0200, Ahmad Fatoum wrote:
>> With multi_v8, we build everything in a single build and that makes the
>> layerscape PBLs exceed their hard limit of 64K failing the build.
> 
> This doesn't happen here. The biggest PBL I get here is the ls1046ardb
> one with 58304 bytes. Are you using some other compiler than me?
> 
> The Layerscape PBLs for the other boards are much smaller because they
> don't use a fixed SDRAM controller setup rather than detecting DIMMs via
> SPD. Would it be enough to disable the LS1046ardb board?

I can't reproduce it now, but seem to recall I didn't change anything
intentionally..

We already have a layerscape defconfig for people intent on using the
RDB. Most other people don't care about this board for
multi_v8_defconfig, so it's unfortunate that you can't enable things
without risking build breakage.

I have patches that I need to finish in the coming months that make too
big images a soft error like we do for missing firmware. I would prefer
we add back Layerscape support after these patches are merged.

Thanks,
Ahmad

> 
> Sascha
> 
>>
>> Until resolved, let's disable it from the defconfig. Users can still use
>> the dedicated layerscape defconfigs.
>>
>> Signed-off-by: Ahmad Fatoum <a.fatoum at barebox.org>
>> ---
>>  arch/arm/configs/multi_v8_defconfig | 5 -----
>>  1 file changed, 5 deletions(-)
>>
>> diff --git a/arch/arm/configs/multi_v8_defconfig b/arch/arm/configs/multi_v8_defconfig
>> index a487d331d04e..5c295cd58269 100644
>> --- a/arch/arm/configs/multi_v8_defconfig
>> +++ b/arch/arm/configs/multi_v8_defconfig
>> @@ -3,7 +3,6 @@ CONFIG_ARCH_BCM283X=y
>>  CONFIG_ARCH_IMX=y
>>  CONFIG_ARCH_K3=y
>>  CONFIG_ARCH_SUNXI=y
>> -CONFIG_ARCH_LAYERSCAPE=y
>>  CONFIG_ARCH_ROCKCHIP=y
>>  CONFIG_ARCH_ZYNQMP=y
>>  CONFIG_MACH_RPI3=y
>> @@ -28,9 +27,6 @@ CONFIG_MACH_ZII_IMX8MQ_DEV=y
>>  CONFIG_MACH_PHYTEC_PHYCORE_IMX93=y
>>  CONFIG_MACH_TQMA93XX=y
>>  CONFIG_IMX_IIM=y
>> -CONFIG_MACH_LS1028ARDB=y
>> -CONFIG_MACH_LS1046ARDB=y
>> -CONFIG_MACH_TQMLS1046A=y
>>  CONFIG_MACH_BEAGLEPLAY=y
>>  CONFIG_MACH_RK3568_EVB=y
>>  CONFIG_MACH_RK3568_BPI_R2PRO=y
>> @@ -258,7 +254,6 @@ CONFIG_REGULATOR_FIXED=y
>>  CONFIG_REGULATOR_ARM_SCMI=y
>>  CONFIG_REGULATOR_RK808=y
>>  CONFIG_RESET_IMX7=y
>> -CONFIG_PCI_LAYERSCAPE=y
>>  CONFIG_PCI_ECAM_GENERIC=y
>>  CONFIG_RTC_CLASS=y
>>  CONFIG_RTC_DRV_DS1307=y
>> -- 
>> 2.39.5
>>
>>
>>
> 

-- 
Pengutronix e.K.                  |                             |
Steuerwalder Str. 21              | http://www.pengutronix.de/  |
31137 Hildesheim, Germany         | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686  | Fax:   +49-5121-206917-5555 |