[PATCH v2 5/5] spi: spi-gpio: switch to gpiod api
Sascha Hauer
s.hauer at pengutronix.de
Thu Sep 26 04:21:41 PDT 2024
Switch the driver to the gpiod api. While at it, remove the unused
platform_data support.
Signed-off-by: Sascha Hauer <s.hauer at pengutronix.de>
---
drivers/spi/gpio_spi.c | 118 +++++++++++++++----------------------------------
include/spi/spi_gpio.h | 27 -----------
2 files changed, 36 insertions(+), 109 deletions(-)
diff --git a/drivers/spi/gpio_spi.c b/drivers/spi/gpio_spi.c
index 36e6204283..6062bad98a 100644
--- a/drivers/spi/gpio_spi.c
+++ b/drivers/spi/gpio_spi.c
@@ -12,16 +12,19 @@
#include <driver.h>
#include <errno.h>
#include <gpio.h>
+#include <linux/gpio/consumer.h>
#include <init.h>
#include <io.h>
#include <malloc.h>
#include <of_gpio.h>
#include <spi/spi.h>
-#include <spi/spi_gpio.h>
struct gpio_spi {
struct spi_master master;
- struct gpio_spi_pdata *data;
+ struct gpio_desc *sck;
+ struct gpio_desc *mosi;
+ struct gpio_desc *miso;
+ struct gpio_descs *cs;
};
#define priv_from_spi_device(s) container_of(s->master, struct gpio_spi, master)
@@ -29,23 +32,28 @@ struct gpio_spi {
static inline void setsck(const struct spi_device *spi, int is_on)
{
struct gpio_spi *priv = priv_from_spi_device(spi);
- gpio_set_value(priv->data->sck, is_on);
+
+ gpiod_set_value(priv->sck, is_on);
}
static inline void setmosi(const struct spi_device *spi, int is_on)
{
struct gpio_spi *priv = priv_from_spi_device(spi);
- if (!gpio_is_valid(priv->data->mosi))
+
+ if (!priv->mosi)
return;
- gpio_set_value(priv->data->mosi, is_on);
+
+ gpiod_set_value(priv->mosi, is_on);
}
static inline int getmiso(const struct spi_device *spi)
{
struct gpio_spi *priv = priv_from_spi_device(spi);
- if (!gpio_is_valid(priv->data->miso))
+
+ if (!priv->miso)
return 1;
- return !!gpio_get_value(priv->data->miso);
+
+ return !!gpiod_get_value(priv->miso);
}
static inline void spidelay(unsigned int nsecs)
@@ -59,11 +67,13 @@ static int gpio_spi_set_cs(struct spi_device *spi, bool en)
{
struct gpio_spi *priv = priv_from_spi_device(spi);
- if (!gpio_is_valid(priv->data->cs[spi->chip_select]))
- return 0;
-
- gpio_set_value(priv->data->cs[spi->chip_select],
- (spi->mode & SPI_CS_HIGH) ? en : !en);
+ /*
+ * Use the raw variant here. Devices using active high chip select
+ * either have the spi-cs-high property in the device tree or set
+ * SPI_CS_HIGH in their driver.
+ */
+ gpiod_set_raw_value(priv->cs->desc[spi->chip_select],
+ (spi->mode & SPI_CS_HIGH) ? en : !en);
return 0;
}
@@ -169,91 +179,35 @@ static int gpio_spi_setup(struct spi_device *spi)
return 0;
}
-static int gpio_spi_of_probe(struct device *dev)
-{
- struct device_node *np = dev->of_node;
- struct gpio_spi_pdata *pdata;
- int n, sck;
-
- if (!IS_ENABLED(CONFIG_OFDEVICE) || dev->platform_data)
- return 0;
-
- sck = of_get_named_gpio(np, "sck-gpios", 0);
- if (!gpio_is_valid(sck))
- return dev_err_probe(dev, sck < 0 ? sck : -EINVAL,
- "missing mandatory SCK gpio\n");
-
- pdata = xzalloc(sizeof(*pdata));
- pdata->sck = sck;
- pdata->num_cs = MAX_CHIPSELECT;
-
- pdata->miso = of_get_named_gpio(np, "miso-gpios", 0);
- if (!gpio_is_valid(pdata->miso))
- pdata->miso = SPI_GPIO_NO_MISO;
-
- pdata->mosi = of_get_named_gpio(np, "mosi-gpios", 0);
- if (!gpio_is_valid(pdata->mosi))
- pdata->mosi = SPI_GPIO_NO_MOSI;
-
- for (n = 0; n < MAX_CHIPSELECT; n++) {
- pdata->cs[n] = of_get_named_gpio(np, "cs-gpios", n);
- if (!gpio_is_valid(pdata->cs[n]))
- pdata->cs[n] = SPI_GPIO_NO_CS;
- }
-
- dev->platform_data = pdata;
-
- return 0;
-}
-
static int gpio_spi_probe(struct device *dev)
{
struct gpio_spi *priv;
- struct gpio_spi_pdata *pdata;
struct spi_master *master;
- int n, ret;
-
- ret = gpio_spi_of_probe(dev);
- if (ret)
- return ret;
- pdata = dev->platform_data;
- ret = gpio_request_one(pdata->sck, GPIOF_DIR_OUT, "spi-sck");
- if (ret)
- return ret;
+ priv = xzalloc(sizeof(*priv));
- if (pdata->miso != SPI_GPIO_NO_MISO) {
- ret = gpio_request_one(pdata->miso, GPIOF_DIR_IN, "spi-miso");
- if (ret)
- return ret;
- }
+ priv->sck = gpiod_get(dev, "sck", GPIOD_OUT_LOW);
+ if (IS_ERR(priv->sck))
+ return dev_err_probe(dev, PTR_ERR(priv->sck), "No SCK GPIO\n");
- if (pdata->mosi != SPI_GPIO_NO_MOSI) {
- ret = gpio_request_one(pdata->mosi, GPIOF_DIR_OUT, "spi-mosi");
- if (ret)
- return ret;
- }
+ priv->miso = gpiod_get_optional(dev, "miso", GPIOD_IN);
+ if (IS_ERR(priv->miso))
+ return dev_err_probe(dev, PTR_ERR(priv->miso), "No MISO GPIO\n");
- for (n = 0; n < pdata->num_cs; n++) {
- char *cs_name;
+ priv->mosi = gpiod_get_optional(dev, "mosi", GPIOD_OUT_LOW);
+ if (IS_ERR(priv->mosi))
+ return dev_err_probe(dev, PTR_ERR(priv->mosi), "No MOSI GPIO\n");
- if (!gpio_is_valid(pdata->cs[n]))
- continue;
+ priv->cs = gpiod_get_array(dev, "cs", GPIOD_OUT_HIGH);
+ if (IS_ERR(priv->cs))
+ return dev_err_probe(dev, PTR_ERR(priv->cs), "No CS GPIOs\n");
- cs_name = basprintf("spi-cs%d", n);
- ret = gpio_request_one(pdata->cs[n], GPIOF_DIR_OUT, cs_name);
- if (ret)
- return ret;
- }
-
- priv = xzalloc(sizeof(*priv));
- priv->data = pdata;
master = &priv->master;
master->dev = dev;
master->bus_num = dev->id;
master->setup = gpio_spi_setup;
master->transfer = gpio_spi_transfer;
- master->num_chipselect = priv->data->num_cs;
+ master->num_chipselect = priv->cs->ndescs;
return spi_register_master(&priv->master);
}
diff --git a/include/spi/spi_gpio.h b/include/spi/spi_gpio.h
deleted file mode 100644
index a18b7dbe07..0000000000
--- a/include/spi/spi_gpio.h
+++ /dev/null
@@ -1,27 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-or-later */
-/*
- * SPI master driver using generic bitbanged GPIO
- *
- * Sebastian Hesselbarth <sebastian.hesselbarth at gmail.com>
- *
- * Based on Linux driver
- * Copyright (C) 2006,2008 David Brownell
- */
-
-#ifndef __SPI_GPIO_H
-#define __SPI_GPIO_H
-
-#define MAX_CHIPSELECT 4
-#define SPI_GPIO_NO_CS (-1)
-#define SPI_GPIO_NO_MISO (-1)
-#define SPI_GPIO_NO_MOSI (-1)
-
-struct gpio_spi_pdata {
- int sck;
- int mosi;
- int miso;
- int cs[MAX_CHIPSELECT];
- int num_cs;
-};
-
-#endif
--
2.39.5
More information about the barebox
mailing list