[PATCH 5/9] ARM: Layerscape: LS1046a: add TF-A support

[Ahmad Fatoum]

Hello Sascha,

On 21.10.24 09:21, Sascha Hauer wrote:
> Right now we still use PPA on LS1046a. This has long been deprecated and
> replaced with TF-A. Add support for starting the TF-A on LS1046a based
> boards as a first step to get rid of PPA.


> +void ls1046_start_tfa(void *barebox, struct dram_regions_info *dram_info)
> +{
> +	void (*bl31)(void) = (void *)0xfbe00000;
> +	size_t bl31_size;
> +	void *bl31_image;
> +	struct bl2_to_bl31_params_mem_v2 *params;
> +
> +	get_builtin_firmware_ext(ls1046a_bl31_bin, barebox, &bl31_image, &bl31_size);
> +	memcpy(bl31, bl31_image, bl31_size);
> +
> +	sync_caches_for_execution();
> +
> +	/* Setup an initial stack for EL2 */
> +	asm volatile("msr sp_el2, %0" : : "r" ((unsigned long)barebox - 16) : "cc");

The - 16 shouldn't be necessary, see commit 6b3dc4abd884 ("ARM: Cleanup stack offset
cargo cult").

> +
> +	params = bl2_plat_get_bl31_params_v2(0, (uintptr_t)barebox, 0);
> +	params->bl31_ep_info.args.arg3 = (unsigned long)dram_info;
> +
> +	printf("Starting bl31\n");

Make it a pr_debug?

> diff --git a/firmware/Makefile b/firmware/Makefile
> index 7265c55c42..9351e24e86 100644
> --- a/firmware/Makefile
> +++ b/firmware/Makefile
> @@ -33,6 +33,7 @@ firmware-$(CONFIG_DRIVER_NET_FSL_FMAN) += fsl_fman_ucode_ls1046_r1.0_106_4_18.bi
>  
>  firmware-$(CONFIG_ARCH_LAYERSCAPE_PPA) += ppa-ls1046a.bin
>  fw-external-$(CONFIG_FIRMWARE_LS1028A_ATF) += ls1028a-bl31.bin
> +fw-external-$(CONFIG_FIRMWARE_LS1046A_ATF) += ls1046a-bl31.bin

This should be added to test/generate-dummy-fw.sh.

Documentation also needs to be updated.

Cheers,
Ahmad


-- 
Pengutronix e.K.                           |                             |
Steuerwalder Str. 21                       | http://www.pengutronix.de/  |
31137 Hildesheim, Germany                  | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |