[PATCH 5/7] mfd: rk808: add support for RK806

[Alexander Shiyan]

As an example, this can be tested with i2c-gpio driver, is'nt it?

ср, 16 окт. 2024 г. в 12:01, Sascha Hauer <s.hauer at pengutronix.de>:
>
> On Wed, Oct 16, 2024 at 10:07:57AM +0300, Alexander Shiyan wrote:
> > Oh, I see that in [4/7]. Sorry for the noise.
>
> I think you are misreading the patch. Indeed the RK806 can work in I2C
> mode and my patch series currently doesn't support this. I have two
> different of_device_id tables, one used for I2C and the other for SPI.
> RK806 currently only is in the SPI table, not in the I2C table.
>
> I2C support for RK806 is likely only a matter of adding the compatible
> entry. I can add it, but I cannot test it. Do you have a hardware to
> test this on?
>
> Sascha
>
>
> >
> > вт, 15 окт. 2024 г. в 17:46, Alexander Shiyan <eagle.alexander923 at gmail.com>:
> > >
> > > вт, 15 окт. 2024 г. в 14:21, Sascha Hauer <s.hauer at pengutronix.de>:
> > > >
> > > > This adds support for the RK806 to the rk808 driver. Additionally to
> > > > I2C this variant comes with SPI support, so add SPI probe support to the
> > > > driver.
> > > >
> > > > Signed-off-by: Sascha Hauer <s.hauer at pengutronix.de>
> > >
> > > Hello Sascha.
> > >
> > > RK806 can also work via I2C. Can you add this compatibility together?
> > >
> > > Thanks!
> >
>
> --
> Pengutronix e.K.                           |                             |
> Steuerwalder Str. 21                       | http://www.pengutronix.de/  |
> 31137 Hildesheim, Germany                  | Phone: +49-5121-206917-0    |
> Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |