[PATCH] commands: mmc: write_reliability: bail out early if already set
Michael Grzeschik
m.grzeschik at pengutronix.de
Wed Oct 9 08:01:59 PDT 2024
Some cards may have HS_CTRL_REL set as 0. This is obsolete
per-spec, but seems to indicate that write reliability was
factory-set. Therefore, just bail out early before checking the
parm.
Signed-off-by: Michael Grzeschik <m.grzeschik at pengutronix.de>
---
commands/mmc.c | 23 +++++++++++++++--------
1 file changed, 15 insertions(+), 8 deletions(-)
diff --git a/commands/mmc.c b/commands/mmc.c
index 718558f18b..dafc3a755f 100644
--- a/commands/mmc.c
+++ b/commands/mmc.c
@@ -138,6 +138,7 @@ static int do_mmc_write_reliability(int argc, char *argv[])
const char *devpath;
struct mci *mci;
u8 *ext_csd;
+ int ret;
if (argc - optind != 1) {
printf("Usage: mmc write_reliability /dev/mmcX\n");
@@ -166,6 +167,15 @@ static int do_mmc_write_reliability(int argc, char *argv[])
goto error;
}
+ /* Some cards may have HS_CTRL_REL set as 0. This is obsolete
+ * per-spec, but seems to indicate that write reliability was
+ * factory-set. Therefore, just bail out early here
+ */
+ if ((ext_csd[EXT_CSD_WR_REL_SET] & 0x1f) == 0x1f) {
+ printf("reliable write already set\n");
+ goto out;
+ }
+
if (!(ext_csd[EXT_CSD_WR_REL_PARAM] & EXT_CSD_HS_CTRL_REL)) {
printf("Device doesn't support WR_REL_SET writes\n");
goto error;
@@ -175,16 +185,13 @@ static int do_mmc_write_reliability(int argc, char *argv[])
* Host has one opportunity to write all of the bits. Separate writes to
* individual bits are not permitted so set all bits for now.
*/
- if ((ext_csd[EXT_CSD_WR_REL_SET] & 0x1f) != 0x1f) {
- int ret;
-
- ret = mci_switch(mci, EXT_CSD_WR_REL_SET, 0x1f);
- if (ret) {
- printf("Failure to write to EXT_CSD_WR_REL_SET\n");
- goto error;
- }
+ ret = mci_switch(mci, EXT_CSD_WR_REL_SET, 0x1f);
+ if (ret) {
+ printf("Failure to write to EXT_CSD_WR_REL_SET\n");
+ goto error;
}
+out:
dma_free(ext_csd);
return COMMAND_SUCCESS;
--
2.39.5
More information about the barebox
mailing list