[PATCH] ARM: i.MX6 sabrelite: free USB VBUS GPIO after use

[Sascha Hauer]

On Tue, 01 Oct 2024 10:52:13 +0200, Sascha Hauer wrote:
> The sabrelite board code uses a GPIO to enable USB VBUS. The same GPIO
> is registered in the device tree as a USB VBUS regulator. This regulator
> currently can't probe because the GPIO is busy due to its usage in board
> code. Free the GPIO after usage in board code to allow probing the VBUS
> regulator.
> 
> The board specific code to enable VBUS might not be needed at all
> anymore, but I currently do not have the board handy to try out, so
> for now just avoid the error messages from failed driver probe.
> 
> [...]

Applied, thanks!

[1/1] ARM: i.MX6 sabrelite: free USB VBUS GPIO after use
      https://git.pengutronix.de/cgit/barebox/commit/?id=3995dd53d2fe (link may not be stable)

Best regards,
-- 
Sascha Hauer <s.hauer at pengutronix.de>