[PATCH master 2/3] mci: sdhci: retrieve host device via common helper or NULL
Ahmad Fatoum
a.fatoum at pengutronix.de
Wed May 22 01:07:33 PDT 2024
Since commit d20abb491654 ("common: console_common: handle NULL dev
gracefully in dev_printf"), it's permissible to pass NULL to the
dev_printf family of functions. Therefore define sdhci_dev, which either
return a device if mci was set or NULL otherwise.
Signed-off-by: Ahmad Fatoum <a.fatoum at pengutronix.de>
---
drivers/mci/sdhci.c | 27 ++++++++++++++++-----------
1 file changed, 16 insertions(+), 11 deletions(-)
diff --git a/drivers/mci/sdhci.c b/drivers/mci/sdhci.c
index da6c2ddb5879..2e8f99fc462c 100644
--- a/drivers/mci/sdhci.c
+++ b/drivers/mci/sdhci.c
@@ -21,6 +21,11 @@ enum sdhci_reset_reason {
SDHCI_RESET_FOR_CQE_RECOVERY,
};
+static inline struct device *sdhci_dev(struct sdhci *host)
+{
+ return host->mci ? host->mci->hw_dev : NULL;
+}
+
static void sdhci_reset_for_reason(struct sdhci *host, enum sdhci_reset_reason reason)
{
if (host->quirks2 & SDHCI_QUIRK2_ISSUE_CMD_DAT_RESET_TOGETHER) {
@@ -170,7 +175,7 @@ static int __sdhci_execute_tuning(struct sdhci *host, u32 opcode)
}
- dev_dbg(host->mci->hw_dev, "Tuning timeout, falling back to fixed sampling clock\n");
+ dev_dbg(sdhci_dev(host), "Tuning timeout, falling back to fixed sampling clock\n");
sdhci_reset_tuning(host);
return -EAGAIN;
}
@@ -416,13 +421,13 @@ int sdhci_wait_for_done(struct sdhci *sdhci, u32 mask)
return -ETIMEDOUT;
if (stat & SDHCI_INT_ERROR) {
- dev_err(sdhci->mci->hw_dev, "SDHCI_INT_ERROR: 0x%08x\n",
+ dev_err(sdhci_dev(sdhci), "SDHCI_INT_ERROR: 0x%08x\n",
stat);
return -EPERM;
}
if (is_timeout(start, 1000 * MSECOND)) {
- dev_err(sdhci->mci->hw_dev,
+ dev_err(sdhci_dev(sdhci),
"SDHCI timeout while waiting for done\n");
return -ETIMEDOUT;
}
@@ -470,7 +475,7 @@ static void sdhci_config_dma(struct sdhci *host)
void sdhci_setup_data_dma(struct sdhci *sdhci, struct mci_data *data,
dma_addr_t *dma)
{
- struct device *dev = sdhci->mci->hw_dev;
+ struct device *dev = sdhci_dev(sdhci);
int nbytes;
if (!data)
@@ -502,7 +507,7 @@ void sdhci_setup_data_dma(struct sdhci *sdhci, struct mci_data *data,
int sdhci_transfer_data_dma(struct sdhci *sdhci, struct mci_data *data,
dma_addr_t dma)
{
- struct device *dev = sdhci->mci->hw_dev;
+ struct device *dev = sdhci_dev(sdhci);
u64 start;
int nbytes;
u32 irqstat;
@@ -615,7 +620,7 @@ int sdhci_transfer_data_pio(struct sdhci *sdhci, struct mci_data *data)
int sdhci_transfer_data(struct sdhci *sdhci, struct mci_data *data, dma_addr_t dma)
{
- struct device *dev = sdhci->mci->hw_dev;
+ struct device *dev = sdhci_dev(sdhci);
if (!data)
return 0;
@@ -665,7 +670,7 @@ static u16 sdhci_get_preset_value(struct sdhci *host)
preset = sdhci_read16(host, SDHCI_PRESET_FOR_HS400);
break;
default:
- dev_warn(host->mci->hw_dev, "Invalid UHS-I mode selected\n");
+ dev_warn(sdhci_dev(host), "Invalid UHS-I mode selected\n");
preset = sdhci_read16(host, SDHCI_PRESET_FOR_SDR12);
break;
}
@@ -778,7 +783,7 @@ void sdhci_enable_clk(struct sdhci *host, u16 clk)
while (!(sdhci_read16(host, SDHCI_CLOCK_CONTROL) &
SDHCI_CLOCK_INT_STABLE)) {
if (is_timeout(start, 150 * MSECOND)) {
- dev_err(host->mci->hw_dev,
+ dev_err(sdhci_dev(host),
"SDHCI clock stable timeout\n");
return;
}
@@ -805,7 +810,7 @@ int sdhci_wait_idle(struct sdhci *host, struct mci_cmd *cmd, struct mci_data *da
!(sdhci_read32(host, SDHCI_PRESENT_STATE) & mask));
if (ret) {
- dev_err(host->mci->hw_dev,
+ dev_err(sdhci_dev(host),
"SDHCI timeout while waiting for idle\n");
return -EBUSY;
}
@@ -827,7 +832,7 @@ int sdhci_wait_idle_data(struct sdhci *host, struct mci_cmd *cmd)
!(sdhci_read32(host, SDHCI_PRESENT_STATE) & mask));
if (ret) {
- dev_err(host->mci->hw_dev,
+ dev_err(sdhci_dev(host),
"SDHCI timeout while waiting for idle\n");
return -EBUSY;
}
@@ -880,7 +885,7 @@ void __sdhci_read_caps(struct sdhci *host, const u16 *ver,
u16 v;
u64 dt_caps_mask = 0;
u64 dt_caps = 0;
- struct device_node *np = host->mci->hw_dev->of_node;
+ struct device_node *np = dev_of_node(sdhci_dev(host));
BUG_ON(!host->mci); /* Call sdhci_setup_host() before using this */
--
2.39.2
More information about the barebox
mailing list