[PATCH v2 0/5] ARM: i.MX8MP: add nominal drive mode support

[Sascha Hauer]

On Fri, 03 May 2024 12:37:12 +0200, Ahmad Fatoum wrote:
> Unlike the i.MX8MM and i.MX8MN SoCs added earlier, the early setup code
> and device tree for the i.MX8MP configures some clocks at frequencies
> that are only validated for overdrive mode, i.e. when VDD_SOC is 950 mV.
> 
> Boards may want to run their SoC at the lower voltage of 850 mV though
> to reduce heat generation and power usage. For this to work, clock rates
> need to adhere to the limits of the nominal drive mode.
> 
> [...]

Applied, thanks!

[1/5] ARM: i.MX8M: pass cpu_type parameter to __imx8m_early_clock_init
      https://git.pengutronix.de/cgit/barebox/commit/?id=ae2dd4a4850f (link may not be stable)
[2/5] ARM: i.MX8MP: configure PLL3 as 600MHz
      https://git.pengutronix.de/cgit/barebox/commit/?id=4a8c03958738 (link may not be stable)
[3/5] ARM: i.MX8MP: configure PLL3 as noc_io parent
      https://git.pengutronix.de/cgit/barebox/commit/?id=608ea0c2fa33 (link may not be stable)
[4/5] ARM: i.MX8MP: don't reparent GIC from BootROM default
      https://git.pengutronix.de/cgit/barebox/commit/?id=ecff33a34978 (link may not be stable)
[5/5] ARM: dts: i.MX8MP: Add optional nominal drive mode DTSI
      https://git.pengutronix.de/cgit/barebox/commit/?id=180337d60753 (link may not be stable)

Best regards,
-- 
Sascha Hauer <s.hauer at pengutronix.de>