[PATCH master] ARM: i.MX9: tqma93xx: handle unknown form factors

[Sascha Hauer]

On Fri, May 03, 2024 at 12:09:23PM +0200, Ahmad Fatoum wrote:
> GCC warns that fdt may be uninitialized. Fix that by treating unknown
> variants as the CA variant. CA was chosen for no particular reason.
> 
> Signed-off-by: Ahmad Fatoum <a.fatoum at pengutronix.de>
> ---
>  arch/arm/boards/tqma93xx/lowlevel.c | 3 +++
>  1 file changed, 3 insertions(+)
> 
> diff --git a/arch/arm/boards/tqma93xx/lowlevel.c b/arch/arm/boards/tqma93xx/lowlevel.c
> index 8d89ee530ff8..66991fc6b03b 100644
> --- a/arch/arm/boards/tqma93xx/lowlevel.c
> +++ b/arch/arm/boards/tqma93xx/lowlevel.c
> @@ -89,6 +89,9 @@ static noinline void tqma93xx_continue(void)
>  	case VARD_FORMFACTOR_TYPE_LGA:
>  		fdt = __dtb_z_imx93_tqma9352_mba93xxla_start;
>  		break;
> +	default:
> +		pr_warn("Unknown formfactor: 0%x. Assuming connector\n", formfactor);
> +		fallthrough;

tqma93xx_get_formfactor() always returns one of the values handled in
this switch/case, so this will never trigger. If gcc mourns about it
then adding the default: is enough, no need to add a message.

Sascha

-- 
Pengutronix e.K.                           |                             |
Steuerwalder Str. 21                       | http://www.pengutronix.de/  |
31137 Hildesheim, Germany                  | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |