[PATCH] mtd: nand: mxc_nand: clear NAND_BBT_CREATE flag

[Sascha Hauer]

On i.MX NAND the factory bad block markers are not at the place the NAND
core expects them to be, so the core also can't properly generate a bad
block table. Clear the NAND_BBT_CREATE flag to prevent the core from
doing so. This preserves the behaviour we had previously with the
barebox driver which was lost when we replaced it with the Kernel
driver.

Signed-off-by: Sascha Hauer <s.hauer at pengutronix.de>
---
 drivers/mtd/nand/raw/mxc_nand.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/mtd/nand/raw/mxc_nand.c b/drivers/mtd/nand/raw/mxc_nand.c
index 2774b6bb4f..c6533b20fc 100644
--- a/drivers/mtd/nand/raw/mxc_nand.c
+++ b/drivers/mtd/nand/raw/mxc_nand.c
@@ -1167,7 +1167,7 @@ static uint8_t bbt_pattern[] = { 'B', 'b', 't', '0' };
 static uint8_t mirror_pattern[] = { '1', 't', 'b', 'B' };
 
 static struct nand_bbt_descr bbt_main_descr = {
-	.options = NAND_BBT_LASTBLOCK | NAND_BBT_CREATE | NAND_BBT_WRITE
+	.options = NAND_BBT_LASTBLOCK | NAND_BBT_WRITE
 	    | NAND_BBT_2BIT | NAND_BBT_VERSION | NAND_BBT_PERCHIP,
 	.offs = 0,
 	.len = 4,
@@ -1177,7 +1177,7 @@ static struct nand_bbt_descr bbt_main_descr = {
 };
 
 static struct nand_bbt_descr bbt_mirror_descr = {
-	.options = NAND_BBT_LASTBLOCK | NAND_BBT_CREATE | NAND_BBT_WRITE
+	.options = NAND_BBT_LASTBLOCK | NAND_BBT_WRITE
 	    | NAND_BBT_2BIT | NAND_BBT_VERSION | NAND_BBT_PERCHIP,
 	.offs = 0,
 	.len = 4,
-- 
2.39.2