[PATCH v2 00/14] mci: add HS200 support for eMMCs

[Sascha Hauer]

On Thu, 14 Mar 2024 19:47:23 +0100, Steffen Trumtrar wrote:
> This series adds support for HS200 mode to mci-core and sdhci.
> As the host driver also needs to handle clock setup, pin control and
> host specific tuning, this series only adds HS200 support to the Arasan
> SDHCI driver.
> 
> Tested on: ZynqMP
> Compile tested: for ZynqMP with/without CONFIG_MCI_TUNING
> 
> [...]

Applied, thanks!

[01/14] ARM: zynqmp: add sd_dll_reset call
        https://git.pengutronix.de/cgit/barebox/commit/?id=e50802987998 (link may not be stable)
[02/14] zynqmp: firmware: add functions to set tap delay
        https://git.pengutronix.de/cgit/barebox/commit/?id=357020fcf88c (link may not be stable)
[03/14] mci: arasan: implement 25MHz quirk for zynqmp
        https://git.pengutronix.de/cgit/barebox/commit/?id=efd852fa6f13 (link may not be stable)
[04/14] include: mci: sync mci_timing with linux
        https://git.pengutronix.de/cgit/barebox/commit/?id=7496070e8378 (link may not be stable)
[05/14] mci: arasan: read clk phases from DT
        https://git.pengutronix.de/cgit/barebox/commit/?id=9b08b1b1783d (link may not be stable)
[06/14] mci: core: save the set clock as actual_clock
        https://git.pengutronix.de/cgit/barebox/commit/?id=80ad7a2a84bd (link may not be stable)
[07/14] mci: arasan: register sdcard/sampleclk
        https://git.pengutronix.de/cgit/barebox/commit/?id=d4a3cb3f9767 (link may not be stable)
[08/14] include: mci: add more EXT_CSD_CARD_TYPE_*
        https://git.pengutronix.de/cgit/barebox/commit/?id=98fc2c9c153b (link may not be stable)
[09/14] mci: core: parse more host capabilities from DT
        https://git.pengutronix.de/cgit/barebox/commit/?id=9a82adc87dfb (link may not be stable)
[10/14] mci: mci-core: add HS200 support
        https://git.pengutronix.de/cgit/barebox/commit/?id=78b2b2886f08 (link may not be stable)
[11/14] mci: mci-core: replace value with define
        https://git.pengutronix.de/cgit/barebox/commit/?id=73861352b1a5 (link may not be stable)
[12/14] mci: sdhci: add tuning support
        https://git.pengutronix.de/cgit/barebox/commit/?id=f5684230829b (link may not be stable)
[13/14] mci: arasan-sdhci: add HS200 tuning support on ZynqMP
        https://git.pengutronix.de/cgit/barebox/commit/?id=97a8d7804666 (link may not be stable)
[14/14] mci: sdhci: replace sdhci_wait_idle
        https://git.pengutronix.de/cgit/barebox/commit/?id=3c735ec29cee (link may not be stable)

Best regards,
-- 
Sascha Hauer <s.hauer at pengutronix.de>