[PATCH v2 09/14] mci: core: parse more host capabilities from DT

[Ahmad Fatoum]

On 14.03.24 19:47, Steffen Trumtrar wrote:
> Port the linux v6.7 mmc host caps2 parsing.
> While at it, remove the ->no_sd and ->no_sdio. These are bits in the
> caps2 field.
> 
> Signed-off-by: Steffen Trumtrar <s.trumtrar at pengutronix.de>

Reviewed-by: Ahmad Fatoum <a.fatoum at pengutronix.de>

> ---
>  drivers/mci/mci-core.c | 36 ++++++++++++++++++++++++++++++------
>  include/mci.h          | 32 ++++++++++++++++++++++++++++++--
>  2 files changed, 60 insertions(+), 8 deletions(-)
> 
> diff --git a/drivers/mci/mci-core.c b/drivers/mci/mci-core.c
> index 6c473d21bf..3e078862f2 100644
> --- a/drivers/mci/mci-core.c
> +++ b/drivers/mci/mci-core.c
> @@ -2031,7 +2031,7 @@ static int mci_card_probe(struct mci *mci)
>  		goto on_error;
>  	}
>  
> -	if (!host->no_sdio) {
> +	if (!(host->caps2 & MMC_CAP2_NO_SDIO)) {
>  		rc = sdio_send_op_cond(mci);
>  		if (!rc) {
>  			mci->ready_for_use = true;
> @@ -2042,11 +2042,11 @@ static int mci_card_probe(struct mci *mci)
>  	}
>  
>  	/* Check if this card can handle the "SD Card Physical Layer Specification 2.0" */
> -	if (!host->no_sd) {
> +	if (!(host->caps2 & MMC_CAP2_NO_SD)) {
>  		rc = sd_send_if_cond(mci);
>  		rc = sd_send_op_cond(mci);
>  	}
> -	if (host->no_sd || rc == -ETIMEDOUT) {
> +	if ((host->caps2 & MMC_CAP2_NO_SD) || rc == -ETIMEDOUT) {
>  		/* If SD card initialization was skipped or if it timed out,
>  		 * we check for an MMC card */
>  		dev_dbg(&mci->dev, "Card seems to be a MultiMediaCard\n");
> @@ -2253,7 +2253,7 @@ int mci_register(struct mci_host *host)
>  	if (IS_ENABLED(CONFIG_MCI_STARTUP))
>  		mci_card_probe(mci);
>  
> -	if (!host->no_sd && dev_of_node(host->hw_dev))
> +	if (!(host->caps2 & MMC_CAP2_NO_SD) && dev_of_node(host->hw_dev))
>  		of_register_fixup(of_broken_cd_fixup, host);
>  
>  	list_add_tail(&mci->list, &mci_list);
> @@ -2324,9 +2324,33 @@ void mci_of_parse_node(struct mci_host *host,
>  
>  	host->broken_cd = of_property_read_bool(np, "broken-cd");
>  	host->non_removable = of_property_read_bool(np, "non-removable");
> -	host->no_sd = of_property_read_bool(np, "no-sd");
> -	host->no_sdio = of_property_read_bool(np, "no-sdio");
>  	host->disable_wp = of_property_read_bool(np, "disable-wp");
> +
> +	if (of_property_read_bool(np, "full-pwr-cycle"))
> +		host->caps2 |= MMC_CAP2_FULL_PWR_CYCLE;
> +	if (of_property_read_bool(np, "full-pwr-cycle-in-suspend"))
> +		host->caps2 |= MMC_CAP2_FULL_PWR_CYCLE_IN_SUSPEND;
> +	if (of_property_read_bool(np, "no-sdio"))
> +		host->caps2 |= MMC_CAP2_NO_SDIO;
> +	if (of_property_read_bool(np, "no-sd"))
> +		host->caps2 |= MMC_CAP2_NO_SD;
> +	if (of_property_read_bool(np, "no-mmc"))
> +		host->caps2 |= MMC_CAP2_NO_MMC;
> +	if (IS_ENABLED(CONFIG_MCI_TUNING)) {
> +		if (of_property_read_bool(np, "mmc-hs200-1_8v"))
> +			host->caps2 |= MMC_CAP2_HS200_1_8V_SDR;
> +		if (of_property_read_bool(np, "mmc-hs200-1_2v"))
> +			host->caps2 |= MMC_CAP2_HS200_1_2V_SDR;
> +		if (of_property_read_bool(np, "mmc-hs400-1_8v"))
> +			host->caps2 |= MMC_CAP2_HS400_1_8V | MMC_CAP2_HS200_1_8V_SDR;
> +		if (of_property_read_bool(np, "mmc-hs400-1_2v"))
> +			host->caps2 |= MMC_CAP2_HS400_1_2V | MMC_CAP2_HS200_1_2V_SDR;
> +		if (of_property_read_bool(np, "mmc-hs400-enhanced-strobe"))
> +			host->caps2 |= MMC_CAP2_HS400_ES;
> +		if (of_property_read_bool(np, "no-mmc-hs400"))
> +			host->caps2 &= ~(MMC_CAP2_HS400_1_8V | MMC_CAP2_HS400_1_2V |
> +					 MMC_CAP2_HS400_ES);
> +	}
>  }
>  
>  void mci_of_parse(struct mci_host *host)
> diff --git a/include/mci.h b/include/mci.h
> index a72ede8db5..7a4521adde 100644
> --- a/include/mci.h
> +++ b/include/mci.h
> @@ -468,6 +468,36 @@ struct mci_host {
>  	const char *devname;		/**< the devicename for the card, defaults to disk%d */
>  	unsigned voltages;
>  	unsigned host_caps;	/**< Host's interface capabilities, refer MMC_VDD_* */
> +	unsigned caps2;		/* More host capabilities */
> +#define MMC_CAP2_BOOTPART_NOACC	(1 << 0)	/* Boot partition no access */
> +#define MMC_CAP2_FULL_PWR_CYCLE	(1 << 2)	/* Can do full power cycle */
> +#define MMC_CAP2_FULL_PWR_CYCLE_IN_SUSPEND (1 << 3) /* Can do full power cycle in suspend */
> +#define MMC_CAP2_HS200_1_8V_SDR	(1 << 5)        /* can support */
> +#define MMC_CAP2_HS200_1_2V_SDR	(1 << 6)        /* can support */
> +#define MMC_CAP2_HS200		(MMC_CAP2_HS200_1_8V_SDR | \
> +				 MMC_CAP2_HS200_1_2V_SDR)
> +#define MMC_CAP2_SD_EXP		(1 << 7)	/* SD express via PCIe */
> +#define MMC_CAP2_SD_EXP_1_2V	(1 << 8)	/* SD express 1.2V */
> +#define MMC_CAP2_CD_ACTIVE_HIGH	(1 << 10)	/* Card-detect signal active high */
> +#define MMC_CAP2_RO_ACTIVE_HIGH	(1 << 11)	/* Write-protect signal active high */
> +#define MMC_CAP2_NO_PRESCAN_POWERUP (1 << 14)	/* Don't power up before scan */
> +#define MMC_CAP2_HS400_1_8V	(1 << 15)	/* Can support HS400 1.8V */
> +#define MMC_CAP2_HS400_1_2V	(1 << 16)	/* Can support HS400 1.2V */
> +#define MMC_CAP2_HS400		(MMC_CAP2_HS400_1_8V | \
> +				 MMC_CAP2_HS400_1_2V)
> +#define MMC_CAP2_HSX00_1_8V	(MMC_CAP2_HS200_1_8V_SDR | MMC_CAP2_HS400_1_8V)
> +#define MMC_CAP2_HSX00_1_2V	(MMC_CAP2_HS200_1_2V_SDR | MMC_CAP2_HS400_1_2V)
> +#define MMC_CAP2_SDIO_IRQ_NOTHREAD (1 << 17)
> +#define MMC_CAP2_NO_WRITE_PROTECT (1 << 18)	/* No physical write protect pin, assume that card is always read-write */
> +#define MMC_CAP2_NO_SDIO	(1 << 19)	/* Do not send SDIO commands during initialization */
> +#define MMC_CAP2_HS400_ES	(1 << 20)	/* Host supports enhanced strobe */
> +#define MMC_CAP2_NO_SD		(1 << 21)	/* Do not send SD commands during initialization */
> +#define MMC_CAP2_NO_MMC		(1 << 22)	/* Do not send (e)MMC commands during initialization */
> +#define MMC_CAP2_CQE		(1 << 23)	/* Has eMMC command queue engine */
> +#define MMC_CAP2_CQE_DCMD	(1 << 24)	/* CQE can issue a direct command */
> +#define MMC_CAP2_AVOID_3_3V	(1 << 25)	/* Host must negotiate down from 3.3V */
> +#define MMC_CAP2_MERGE_CAPABLE	(1 << 26)	/* Host can merge a segment over the segment size */
> +#define MMC_CAP2_CRYPTO		0
>  	unsigned f_min;		/**< host interface lower limit */
>  	unsigned f_max;		/**< host interface upper limit */
>  	unsigned clock;		/**< Current clock used to talk to the card */
> @@ -479,8 +509,6 @@ struct mci_host {
>  	int use_dsr;		/**< optional dsr usage flag */
>  	int broken_cd;		/**< card detect is broken */
>  	bool non_removable;	/**< device is non removable */
> -	bool no_sd;		/**< do not send SD commands during initialization */
> -	bool no_sdio;		/**< do not send SDIO commands during initialization */
>  	bool disable_wp;	/**< ignore write-protect detection logic */
>  	struct regulator *supply;
>  
> 

-- 
Pengutronix e.K.                           |                             |
Steuerwalder Str. 21                       | http://www.pengutronix.de/  |
31137 Hildesheim, Germany                  | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |