[PATCH] ARM: i.MX: define MUX_MODE_SION for use in board code

[Sascha Hauer]

On Wed, 13 Mar 2024 19:00:27 +0100, Ahmad Fatoum wrote:
> While we set SION for all I2C pinmux configurations, board code may
> need to set SION for other pads as well. Provide a MUX_MODE_SION
> definition that can be OR-d into the pinmux argument of
> imx8mm_setup_pad().
> 
> 

Applied, thanks!

[1/1] ARM: i.MX: define MUX_MODE_SION for use in board code
      https://git.pengutronix.de/cgit/barebox/commit/?id=4ff51eb1816d (link may not be stable)

Best regards,
-- 
Sascha Hauer <s.hauer at pengutronix.de>