[PATCH 4/6] arm: dts: karo: import dts for karo-qsxp-ml81

[Ahmad Fatoum]

Hello Stefan,

On 11.03.24 15:23, Stefan Kerkmann wrote:
> Hello Ahmad,
> 
> On 11.03.24 11:02, Ahmad Fatoum wrote:
>> Hello Stefan,
>>
>> On 11.03.24 10:10, Stefan Kerkmann wrote:
>>> From: Marc Kleine-Budde <mkl at pengutronix.de>
>>>
>>> This imports the device tree for the Ka-Ro QSXP, which is a i.MX8M Plus
>>> solder down system on module. The sources have been adapted from the
>>> offical Ka-Ro github[1], commit a49b38ec97854c0cd9cd83a9f4ae3b56e99a58b6.
>>>
>>> [1]: https://github.com/karo-electronics/meta-karo-nxp.git
>>
>> To make it easier to sync with Linux, once the device tree goes upstream,
>> could you separate the barebox-specific changes into a separate file?
>>
> 
> Ack.
> 
>>> +	model = "Ka-Ro electronics QSXP-ML81 (NXP i.MX8MP) module";
>>> +	compatible = "karo,imx8mp-qsxp-ml81", "fsl,imx8mp";
>>
>> Add a compatible for the SoM here: "karo,imx8mp-qsxp".

Then, why is it a DTS and not a DTSI?


> You're right, AFAIK the eMMC JEDEC standard mandates 1.8V IOs for HS200
> mode. For DDR mode the IO voltage can be 3.3V or 1.8V, according to the
> datasheet of the used THGBMNG5D1LBAIL eMMC (if the product pictures are
> anything to go by). So the correct voltage ranges property would be
> `voltage-ranges = <1800 1800 3300 3300>`?

Your I/O Voltage (vccq) is fixed at 1.8V, so 3300 sounds wrong.

> The line itself was copied verbatim from
> https://github.com/karo-electronics/meta-karo-nxp/blob/mickledore/recipes-kernel/linux/linux-karo-6.1/mx8-nxp-bsp/dts/freescale/imx8mp-karo.dtsi#L263
> 
> 
>> Either way, it doesn't matter to barebox.
> So in the end we just delete it?

Just delete it.

Cheers,
Ahmad

> 
>>> +	non-removable;
>>> +	status = "okay";
>>> +};
>>> +
>>> +&wdog1 {
>>> +	pinctrl-names = "default";
>>> +	pinctrl-0 = <&pinctrl_wdog>;
>>> +	fsl,ext-reset-output;
>>> +	status = "okay";
>>> +};
>>> +
>>> +&iomuxc {
>>> +	pinctrl_i2c1: i2c1grp {
>>> +		fsl,pins = <
>>> +			MX8MP_IOMUXC_I2C1_SCL__I2C1_SCL			0x400001c2
>>> +			MX8MP_IOMUXC_I2C1_SDA__I2C1_SDA			0x400001c2
>>> +		>;
>>> +	};


-- 
Pengutronix e.K.                           |                             |
Steuerwalder Str. 21                       | http://www.pengutronix.de/  |
31137 Hildesheim, Germany                  | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |