[PATCH 0/6] arm: imx8mp: add karo electronics qsxp imx8mp som support

[Stefan Kerkmann]

The Ka-Ro QSXP[1] is a i.MX8M Plus solder down system on module. This
series adds support for the SOM itself on the QSBASE4 RDK. For ethernet
support on the QSBASE4 RDK, the Micrel phy driver gains support for the
KSZ9131 gigabit ethernet phy.

[1]: https://www.karo-electronics.de/qsxp

Signed-off-by: Stefan Kerkmann <s.kerkmann at pengutronix.de>
---
Marc Kleine-Budde (4):
      net: phy: micrel: update id table from Linux kernel
      net: phy: micrel: add support for ksz9131 phy
      arm: dts: karo: import dts for karo-qsxp-ml81
      arm: imx8mp: add karo electronics qsxp imx8mp som support

Sebastian Reichel (1):
      of: introduce of_property_read_s32

Stefan Kerkmann (1):
      arm: dts: karo: add karo imx8mp-karo-qsxp-qsbase4

 arch/arm/boards/Makefile                           |    1 +
 arch/arm/boards/karo-qsxp-ml81/Makefile            |    4 +
 arch/arm/boards/karo-qsxp-ml81/board.c             |   35 +
 .../flash-header-karo-qsxp-ml81.imxcfg             |    9 +
 arch/arm/boards/karo-qsxp-ml81/lowlevel.c          |  102 ++
 arch/arm/boards/karo-qsxp-ml81/lowlevel.h          |    8 +
 arch/arm/boards/karo-qsxp-ml81/lpddr4-timing.c     | 1597 ++++++++++++++++++++
 arch/arm/dts/Makefile                              |    1 +
 arch/arm/dts/imx8mp-karo-qsxp-ml81-qsbase4.dts     |   86 ++
 arch/arm/dts/imx8mp-karo-qsxp-ml81.dts             |  160 ++
 arch/arm/dts/imx8mp-karo.dtsi                      |  407 +++++
 arch/arm/mach-imx/Kconfig                          |   10 +
 drivers/net/phy/micrel.c                           |  188 +++
 images/Makefile.imx                                |    2 +
 include/linux/micrel_phy.h                         |   49 +-
 include/of.h                                       |    7 +
 16 files changed, 2659 insertions(+), 7 deletions(-)
---
base-commit: 6883d32102d8a253f4fc2bcfafbf3767a725e3a8
change-id: 20240311-karo-imx8mp-som-board-upstreaming-9eef98b7735e

Best regards,
-- 
Stefan Kerkmann <s.kerkmann at pengutronix.de>