[PATCH master] optee: build common code depending on CONFIG_HAVE_OPTEE

[Ahmad Fatoum]

There's a stub for optee_set_membase(), but it's only defined when
CONFIG_HAVE_OPTEE is disabled. The out-of-line version is only linked
when there's either PBL_OPTEE or BOOTM_OPTEE, both of which select
HAVE_OPTEE.

HAVE_OPTEE can also be selected by OPTEE, which is the option for
the driver communicating with OP-TEE. This leads to a linker error
with the combination of CONFIG_OPTEE=y, CONFIG_PBL_OPTEE=n and
CONFIG_BOOTM_OPTEE=n.

Fix this by using CONFIG_HAVE_OPTEE both in header and Makefile.

Signed-off-by: Ahmad Fatoum <a.fatoum at pengutronix.de>
---
 common/Makefile | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

diff --git a/common/Makefile b/common/Makefile
index 2fc4a703c8c4..96498790b300 100644
--- a/common/Makefile
+++ b/common/Makefile
@@ -80,8 +80,7 @@ obj-$(CONFIG_BAREBOX_UPDATE_IMX_NAND_FCB) += imx-bbu-nand-fcb.o
 obj-$(CONFIG_BOOT)		+= boot.o
 obj-$(CONFIG_SERIAL_DEV_BUS)	+= serdev.o
 obj-$(CONFIG_USBGADGET_START)	+= usbgadget.o
-obj-pbl-$(CONFIG_PBL_OPTEE)	+= optee.o
-obj-$(CONFIG_BOOTM_OPTEE)	+= optee.o
+obj-pbl-$(CONFIG_HAVE_OPTEE)	+= optee.o
 obj-$(CONFIG_FASTBOOT_BASE)	+= fastboot.o
 
 ifdef CONFIG_PASSWORD
-- 
2.39.2