[PATCH v2 060/113] efi: payload: init: restrict barebox mem to first 1G only on x86

[Ahmad Fatoum]

When run as EFI payload, barebox will not have full access to DRAM and will
have to ask the EFI firmware for memory. It does so once at the beginning
and since commit 356aaef5a37d ("efi: improve malloc pool allocation"),
the buffer was always placed beneath the 1G boundary.

Aforementioned commit didn't elaborate why a maximum of 1G in particular
was chosen. Anyways, non-PC architectures have different memory maps, so
a 1G limit doesn't make sense there. Therefore restrict the limit to
ARCH_X86. On non-x86, we allow the memory pages to be located anywhere.

This can break PCI drivers on systems that so far assumed barebox memory
is located in the first 4G, but that's ok. That code will need to be
fixed eventually anyway.

Cc: Michael Olbrich <m.olbrich at pengutronix.de>
Signed-off-by: Ahmad Fatoum <a.fatoum at pengutronix.de>
---
 efi/payload/init.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/efi/payload/init.c b/efi/payload/init.c
index 557bf033a4a2..dedecbf92cec 100644
--- a/efi/payload/init.c
+++ b/efi/payload/init.c
@@ -293,7 +293,7 @@ void efi_main(efi_handle_t image, struct efi_system_table *sys_table)
 		BS->handle_protocol(efi_loaded_image->device_handle,
 				&efi_device_path_protocol_guid, (void **)&efi_device_path);
 
-	mem = 0x3fffffff;
+	mem = IS_ENABLED(CONFIG_X86) ? 0x3fffffff : ~0ULL;
 	for (memsize = SZ_256M; memsize >= SZ_8M; memsize /= 2) {
 		efiret  = BS->allocate_pages(EFI_ALLOCATE_MAX_ADDRESS,
 					     EFI_LOADER_DATA,
-- 
2.39.2