[PATCH 0/4] of: fdt: read blspec/FIT DT compat without unflattening

[Sascha Hauer]

On Fri, 01 Mar 2024 14:04:41 +0100, Ahmad Fatoum wrote:
> blspec and FIT systems usually have multiple entries/configurations,
> where a suitable one should be selected at runtime by comparing each
> against the board's barebox DT compatible.
> 
> For blspec, this meant we need to unflatten the whole DT only to access
> a single property. For FIT, this meant we expected the configuration to
> carry a "compatible" property and didn't even attempt to parse it out of
> the fdt as fallback. Both are resolved with this series.
> 
> [...]

Applied, thanks!

[1/4] of: fdt: factor out FDT header parsing
      https://git.pengutronix.de/cgit/barebox/commit/?id=a8b58bf5d7cd (link may not be stable)
[2/4] of: fdt: implement fdt_machine_is_compatible
      https://git.pengutronix.de/cgit/barebox/commit/?id=143f2ae76809 (link may not be stable)
[3/4] blspec: don't parse whole device tree to compare compatibles
      https://git.pengutronix.de/cgit/barebox/commit/?id=9f2b74f1eb58 (link may not be stable)
[4/4] FIT: support finding compatible configuration by FDT compatible
      https://git.pengutronix.de/cgit/barebox/commit/?id=5c9cd335e893 (link may not be stable)

Best regards,
-- 
Sascha Hauer <s.hauer at pengutronix.de>