[PATCH] video: backlight-pwm: switch to gpiod functions

[Ahmad Fatoum]

On 16.07.24 14:03, Ahmad Fatoum wrote:
> Using GPIO descriptors aligns us more with the Linux customs nowadays
> and takes care of potential active low handling.

Please dismiss. I'll send out a v2 at a later time.

> 
> Signed-off-by: Ahmad Fatoum <a.fatoum at pengutronix.de>
> ---
>  drivers/video/backlight-pwm.c | 27 ++++++++-------------------
>  1 file changed, 8 insertions(+), 19 deletions(-)
> 
> diff --git a/drivers/video/backlight-pwm.c b/drivers/video/backlight-pwm.c
> index 87358ca778ec..d3c81114e006 100644
> --- a/drivers/video/backlight-pwm.c
> +++ b/drivers/video/backlight-pwm.c
> @@ -12,8 +12,7 @@
>  #include <linux/err.h>
>  #include <of.h>
>  #include <regulator.h>
> -#include <gpio.h>
> -#include <of_gpio.h>
> +#include <linux/gpio/consumer.h>
>  #include <linux/math64.h>
>  
>  struct pwm_backlight {
> @@ -22,8 +21,7 @@ struct pwm_backlight {
>  	struct regulator *power;
>  	uint32_t period;
>  	unsigned int *levels;
> -	int enable_gpio;
> -	int enable_active_high;
> +	struct gpio_desc *enable_gpio;
>  	int enabled;
>  	unsigned int scale;
>  };
> @@ -41,10 +39,7 @@ static int backlight_pwm_enable(struct pwm_backlight *pwm_backlight)
>  
>  	regulator_enable(pwm_backlight->power);
>  
> -	if (gpio_is_valid(pwm_backlight->enable_gpio)) {
> -		gpio_direction_output(pwm_backlight->enable_gpio,
> -				pwm_backlight->enable_active_high);
> -	}
> +	gpiod_direction_output(pwm_backlight->enable_gpio, true);
>  
>  	pwm_backlight->enabled = 1;
>  
> @@ -53,13 +48,13 @@ static int backlight_pwm_enable(struct pwm_backlight *pwm_backlight)
>  
>  static int backlight_pwm_disable(struct pwm_backlight *pwm_backlight)
>  {
> +	int ret;
> +
>  	if (!pwm_backlight->enabled)
>  		return 0;
>  
> -	if (gpio_is_valid(pwm_backlight->enable_gpio)) {
> -		gpio_direction_output(pwm_backlight->enable_gpio,
> -				!pwm_backlight->enable_active_high);
> -
> +	ret = gpiod_direction_output(pwm_backlight->enable_gpio, false);
> +	if (!ret) {
>  		regulator_disable(pwm_backlight->power);
>  
>  		/*
> @@ -109,7 +104,6 @@ static int pwm_backlight_parse_dt(struct device *dev,
>  	int length;
>  	u32 value;
>  	int ret, i;
> -	enum of_gpio_flags flags;
>  
>  	if (!node)
>  		return -ENODEV;
> @@ -154,12 +148,7 @@ static int pwm_backlight_parse_dt(struct device *dev,
>  		pwm_backlight->backlight.brightness_max = pwm_backlight->scale;
>  	}
>  
> -	pwm_backlight->enable_gpio = of_get_named_gpio_flags(node, "enable-gpios", 0, &flags);
> -
> -	if (gpio_is_valid(pwm_backlight->enable_gpio)) {
> -		if (!(flags & OF_GPIO_ACTIVE_LOW))
> -			pwm_backlight->enable_active_high = 1;
> -	}
> +	pwm_backlight->enable_gpio = gpiod_get_optional(dev, "enable-gpios", 0);
>  
>  	return 0;
>  }

-- 
Pengutronix e.K.                           |                             |
Steuerwalder Str. 21                       | http://www.pengutronix.de/  |
31137 Hildesheim, Germany                  | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |