[PATCH 0/7] pinctrl: rockchip: support &pcfg_input/output

[Sascha Hauer]

On Mon, 01 Jul 2024 09:32:13 +0200, Ahmad Fatoum wrote:
> The Rockchip pinctrl binding can not only mux pins as GPIOs and
> configure the bias, but also configure the direction and whether it's
> high/low for outputs and schmitt trigger for inputs.
> 
> This is used in some device trees to enable peripherals as a finer
> grained gpio-hog.
> 
> [...]

Applied, thanks!

[1/7] pinctrl: import <linux/pinctrl/pinconf-generic.h> header
      https://git.pengutronix.de/cgit/barebox/commit/?id=e6187ed1a19b (link may not be stable)
[2/7] pinctrl: rockchip: make use of pinconf-generic.h
      https://git.pengutronix.de/cgit/barebox/commit/?id=eb792c5846bd (link may not be stable)
[3/7] pinctrl: rockchip: use of_property_read_bool()
      https://git.pengutronix.de/cgit/barebox/commit/?id=ba588f2f2fdf (link may not be stable)
[4/7] pinctrl: rockchip: add support for configuring schmitt trigger
      https://git.pengutronix.de/cgit/barebox/commit/?id=73b4a7b3d3c5 (link may not be stable)
[5/7] pinctrl: rockchip: add support for bias-pull-pin-default
      https://git.pengutronix.de/cgit/barebox/commit/?id=a56a87ab81ab (link may not be stable)
[6/7] gpiolib: implement of_gpio_get_chip_by_alias
      https://git.pengutronix.de/cgit/barebox/commit/?id=c57a040ac78d (link may not be stable)
[7/7] pinctrl: rockchip: add support for configuring GPIO direction
      https://git.pengutronix.de/cgit/barebox/commit/?id=af7c5c004a5d (link may not be stable)

Best regards,
-- 
Sascha Hauer <s.hauer at pengutronix.de>