[PATCH 2/2] ARM: i.MX8M: convert the machine init to the soc driver

[Sascha Hauer]

On Thu, Jan 11, 2024 at 12:51:20PM +0100, Marco Felsch wrote:
> Convert the i.MX8M machine init code to the previously introduced soc
> framework. The soc driver was mostly copied from Linux with slightly
> adaptions for barebox. To the soc driver is called during the
> postcore_initcall to keep the level aligned with the previous imx_init().
> 
> +static int __init imx8_soc_init(void)
> +{
> +	struct device_node *of_root = of_get_root_node();
> +	struct soc_device_attribute *soc_dev_attr;
> +	struct soc_device *soc_dev;
> +	const struct of_device_id *id;
> +	u32 soc_rev = 0;
> +	const struct imx8_soc_data *data;
> +	int ret;
> +
> +	soc_dev_attr = kzalloc(sizeof(*soc_dev_attr), GFP_KERNEL);
> +	if (!soc_dev_attr)
> +		return -ENOMEM;
> +
> +	soc_dev_attr->family = "Freescale i.MX";
> +
> +	ret = of_property_read_string(of_root, "model", &soc_dev_attr->machine);
> +	if (ret)
> +		goto free_soc;
> +
> +	id = of_match_node(imx8_soc_match, of_root);
> +	if (!id) {
> +		ret = -ENODEV;
> +		goto free_soc;
> +	}

This is executed as an initcall and as such shouldn't assume it's
running on an i.MX8. Please check for foreign SoCs early and return
without an error in that case.

> +
> +	soc_dev_attr->serial_number = basprintf("%016llX", soc_uid);

xasprintf should be fine here.

Sascha

-- 
Pengutronix e.K.                           |                             |
Steuerwalder Str. 21                       | http://www.pengutronix.de/  |
31137 Hildesheim, Germany                  | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |