[PATCH RFC] bootm: support printing bootm parameters determined at runtime to file

[Sascha Hauer]

On Wed, Jan 10, 2024 at 04:26:11PM +0100, Ahmad Fatoum wrote:
> Hello Sascha,
> 
> On 10.01.24 16:18, Sascha Hauer wrote:
> > On Wed, Jan 10, 2024 at 03:39:58PM +0100, Ahmad Fatoum wrote:
> >> The barebox bootm command is often not called directly, but via
> >> bootloader spec or FIT image boot handlers. For debugging, it can be
> >> useful to reuse those boot handlers, but replace single artifacts, e.g.
> >> using the barebox device tree instead of the bootloader-spec provided
> >> device tree.
> >>
> >> To make this easier, have boot -v -d (verbose + dry run) write a boot
> >> script that reproduces the cancelled boot to /env/boot/cancelled.
> > 
> > I like the idea very much. I also had this problem more than once.
> > 
> > I think an explicit option rather than "-v -d" would be better. With
> > this there would be a natural way to document this behaviour in the
> > boot help output.
> > 
> > /env/boot/cancelled would be saved in the environment with a saveenv
> > which is likely not desirable. Maybe better put it somewhere in /tmp/?
> 
> Or have the new option take an argument, which would be the path to save
> the file to?

We could make that argument optional, then we could still fall back to a
default when no path is given.

Sascha

-- 
Pengutronix e.K.                           |                             |
Steuerwalder Str. 21                       | http://www.pengutronix.de/  |
31137 Hildesheim, Germany                  | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |