[PATCH] ARM: i.MX6: correct UART IOMUX_PADs

[Jonas Rebmann]

For SD3_DAT0, add the definition for UART1_RTS and correct UART1_CTS to
longer use the actual address of RTS Select Input Register.

As confirmed by the i.MX manual and dts/src/arm/nxp/imx/imx6q-pinfunc.h:

 #define MX6QDL_PAD_EIM_D19__UART1_CTS_B      0x09c 0x3b0 0x000 0x4 0x0
 #define MX6QDL_PAD_EIM_D19__UART1_RTS_B      0x09c 0x3b0 0x91c 0x4 0x0

Signed-off-by: Jonas Rebmann <jre at pengutronix.de>
---
 include/mach/imx/iomux-mx6.h | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/include/mach/imx/iomux-mx6.h b/include/mach/imx/iomux-mx6.h
index 991300060096a2a0e64dad7fc7d0ebe000331590..d2eacc9a33b65e7d8253fec065f70795a9ec731c 100644
--- a/include/mach/imx/iomux-mx6.h
+++ b/include/mach/imx/iomux-mx6.h
@@ -332,6 +332,8 @@
 #define _MX6Q_PAD_EIM_D19__IPU2_CSI1_D_16                                      \
 		IOMUX_PAD(0x03B0, 0x009C, 3, 0x08C8, 0, 0)
 #define _MX6Q_PAD_EIM_D19__UART1_CTS                                           \
+		IOMUX_PAD(0x03B0, 0x009C, 4, 0x0000, 0, 0)
+#define _MX6Q_PAD_EIM_D19__UART1_RTS                                           \
 		IOMUX_PAD(0x03B0, 0x009C, 4, 0x091C, 0, 0)
 #define _MX6Q_PAD_EIM_D19__GPIO_3_19                                           \
 		IOMUX_PAD(0x03B0, 0x009C, 5, 0x0000, 0, 0)
@@ -3796,6 +3798,7 @@
 #define  MX6Q_PAD_EIM_D19__IPU1_DI0_PIN8                         (_MX6Q_PAD_EIM_D19__IPU1_DI0_PIN8 | MUX_PAD_CTRL(NO_PAD_CTRL))
 #define  MX6Q_PAD_EIM_D19__IPU2_CSI1_D_16                        (_MX6Q_PAD_EIM_D19__IPU2_CSI1_D_16 | MUX_PAD_CTRL(NO_PAD_CTRL))
 #define  MX6Q_PAD_EIM_D19__UART1_CTS                             (_MX6Q_PAD_EIM_D19__UART1_CTS | MUX_PAD_CTRL(MX6Q_UART_PAD_CTRL))
+#define  MX6Q_PAD_EIM_D19__UART1_RTS                             (_MX6Q_PAD_EIM_D19__UART1_RTS | MUX_PAD_CTRL(MX6Q_UART_PAD_CTRL))
 #define  MX6Q_PAD_EIM_D19__GPIO_3_19                             (_MX6Q_PAD_EIM_D19__GPIO_3_19 | MUX_PAD_CTRL(NO_PAD_CTRL))
 #define  MX6Q_PAD_EIM_D19__EPIT1_EPITO                           (_MX6Q_PAD_EIM_D19__EPIT1_EPITO | MUX_PAD_CTRL(NO_PAD_CTRL))
 #define  MX6Q_PAD_EIM_D19__PL301_MX6QPER1_HRESP                  (_MX6Q_PAD_EIM_D19__PL301_MX6QPER1_HRESP | MUX_PAD_CTRL(NO_PAD_CTRL))

---
base-commit: a7ae043343c89e8b75904a41174b9b4cf2df35a0
change-id: 20241213-mx6q-pad-rts-96f98d2fdf5f

Best regards,
-- 
Jonas Rebmann <jre at pengutronix.de>