[PATCH 2/2] mci: sdhci: arasan: remove dead no 1.8V quirk

[Lucas Stach]

Since 21e5f283cb72 ("mci: sdhci: arasan: Use sdhci_setup_host()"), the
no-1-8-v DT property is handled by the common mci_of_parse. Remove the
dead quirk from the driver.

Signed-off-by: Lucas Stach <dev at lynxeye.de>
---
 drivers/mci/arasan-sdhci.c | 4 ----
 1 file changed, 4 deletions(-)

diff --git a/drivers/mci/arasan-sdhci.c b/drivers/mci/arasan-sdhci.c
index 2af9ad10bed7..112fb5a669d5 100644
--- a/drivers/mci/arasan-sdhci.c
+++ b/drivers/mci/arasan-sdhci.c
@@ -70,7 +70,6 @@ struct arasan_sdhci_host {
 	struct sdhci_arasan_clk_data clk_data;
 /* Controller does not have CD wired and will not function normally without */
 #define SDHCI_ARASAN_QUIRK_FORCE_CDTEST		BIT(0)
-#define SDHCI_ARASAN_QUIRK_NO_1_8_V		BIT(1)
 /*
  * Some of the Arasan variations might not have timing requirements
  * met at 25MHz for Default Speed mode, those controllers work at
@@ -768,9 +767,6 @@ static int arasan_sdhci_probe(struct device *dev)
 	if (of_property_read_bool(np, "xlnx,fails-without-test-cd"))
 		arasan_sdhci->quirks |= SDHCI_ARASAN_QUIRK_FORCE_CDTEST;
 
-	if (of_property_read_bool(np, "no-1-8-v"))
-		arasan_sdhci->quirks |= SDHCI_ARASAN_QUIRK_NO_1_8_V;
-
 	if (of_device_is_compatible(np, "xlnx,zynqmp-8.9a")) {
 		if (IS_ENABLED(CONFIG_MCI_TUNING))
 			mci->ops.execute_tuning = arasan_zynqmp_execute_tuning;
-- 
2.47.1