Reset on Beaglebone Black has become unreliable/broken

[Konstantin Kletschke]

On Tue, Dec 03, 2024 at 07:28:24PM +0100, Ahmad Fatoum wrote:

> You can enable it for barebox.bin too, but enabling it for MLO only
> should work too.

Okay.

> > 2~�W-�,-H]
> >           ���k׋�ҫ�.LWC�C�C��arebox 2024.10.0-00152-g53c99b9f550b-dirty #15 Mon Dec 2 15:07:37 CET 2024
> 
> Hmm, CONFIG_BAUDRATE is set correctly?

CONFIG_BAUDRATE=115200, never changed that.

> If it doesn't work at a later place, it won't work when you move it
> earlier. I have a BBB here, so I can give enabling DEBUG_LL a try

Ou, then I have misunderstood one of your intial mails where I thought
moving it earlier should change something, if RAM setup fails getting an
output eventually despite of that.

> too if you get stuck.

I manage to get DEBUG_LL on and run it, but the only difference is the
scrambled output in my terminal on powerup boot or when resetting with 
"my cold restart" modification. 
But wait, I do not know if it as glitch, when CONFIG_LL_DEBUG is on and
I power on, I see a "2" immediately put out in terminal prepended first.
When the system gets stuck it does it in a way I do not see anything with
or without enabled in stuck case.

I extremely appreciate your help getting CONFIG_LL_DEBUG run.
I can support with a dozen of BBBs within a day to your office, its
nearly on my way from my home to my work :-D

Regards
Konsti

-- 
INSIDE M2M GmbH
Konstantin Kletschke
Berenbosteler Straße 76 B
30823 Garbsen

Telefon: +49 (0) 5137 90950136
Mobil: +49 (0) 151 15256238
Fax: +49 (0) 5137 9095010

konstantin.kletschke at inside-m2m.de
http://www.inside-m2m.de 

Geschäftsführung: Michael Emmert, Derek Uhlig
HRB: 111204, AG Hannover