[PATCH 10/15] ARM: remove non PBL Atmel boards
Sascha Hauer
s.hauer at pengutronix.de
Thu Apr 25 04:54:34 PDT 2024
Some Atmel AT91 boards still do not have PBL support which becomes
mandatory soon. Remove these boards.
Signed-off-by: Sascha Hauer <s.hauer at pengutronix.de>
---
arch/arm/boards/Makefile | 3 -
arch/arm/boards/sama5d3xek/Makefile | 6 -
.../defaultenv-sama5d3xek/bin/init_board | 15 -
.../sama5d3xek/defaultenv-sama5d3xek/config | 44 --
arch/arm/boards/sama5d3xek/hw_version.c | 236 ---------
arch/arm/boards/sama5d3xek/hw_version.h | 40 --
arch/arm/boards/sama5d3xek/init.c | 475 ------------------
arch/arm/boards/sama5d3xek/lowlevel.c | 23 -
arch/arm/boards/sama5d4_xplained/Makefile | 4 -
arch/arm/boards/sama5d4_xplained/env/boot/mmc | 8 -
.../arm/boards/sama5d4_xplained/env/boot/nand | 8 -
.../sama5d4_xplained/env/init/automount | 5 -
.../sama5d4_xplained/env/init/mtdparts-nand | 6 -
.../boards/sama5d4_xplained/env/init/splash | 15 -
.../sama5d4_xplained/env/nv/boot.default | 1 -
.../env/nv/linux.bootargs.console | 1 -
arch/arm/boards/sama5d4_xplained/lowlevel.c | 23 -
.../sama5d4_xplained/sama5d4_xplained.c | 320 ------------
arch/arm/boards/sama5d4ek/Makefile | 4 -
arch/arm/boards/sama5d4ek/env/boot/nand | 6 -
.../boards/sama5d4ek/env/init/mtdparts-nand | 6 -
.../boards/sama5d4ek/env/init/mtdparts-nor | 6 -
arch/arm/boards/sama5d4ek/env/init/splash | 10 -
arch/arm/boards/sama5d4ek/env/nv/boot.default | 1 -
arch/arm/boards/sama5d4ek/env/nv/hostname | 1 -
.../sama5d4ek/env/nv/linux.bootargs.console | 1 -
arch/arm/boards/sama5d4ek/lowlevel.c | 23 -
arch/arm/boards/sama5d4ek/sama5d4ek.c | 318 ------------
arch/arm/configs/sama5d4_xplained_defconfig | 84 ----
arch/arm/configs/sama5d4ek_defconfig | 83 ---
arch/arm/mach-at91/Kconfig | 36 --
31 files changed, 1812 deletions(-)
delete mode 100644 arch/arm/boards/sama5d3xek/Makefile
delete mode 100644 arch/arm/boards/sama5d3xek/defaultenv-sama5d3xek/bin/init_board
delete mode 100644 arch/arm/boards/sama5d3xek/defaultenv-sama5d3xek/config
delete mode 100644 arch/arm/boards/sama5d3xek/hw_version.c
delete mode 100644 arch/arm/boards/sama5d3xek/hw_version.h
delete mode 100644 arch/arm/boards/sama5d3xek/init.c
delete mode 100644 arch/arm/boards/sama5d3xek/lowlevel.c
delete mode 100644 arch/arm/boards/sama5d4_xplained/Makefile
delete mode 100644 arch/arm/boards/sama5d4_xplained/env/boot/mmc
delete mode 100644 arch/arm/boards/sama5d4_xplained/env/boot/nand
delete mode 100644 arch/arm/boards/sama5d4_xplained/env/init/automount
delete mode 100644 arch/arm/boards/sama5d4_xplained/env/init/mtdparts-nand
delete mode 100644 arch/arm/boards/sama5d4_xplained/env/init/splash
delete mode 100644 arch/arm/boards/sama5d4_xplained/env/nv/boot.default
delete mode 100644 arch/arm/boards/sama5d4_xplained/env/nv/linux.bootargs.console
delete mode 100644 arch/arm/boards/sama5d4_xplained/lowlevel.c
delete mode 100644 arch/arm/boards/sama5d4_xplained/sama5d4_xplained.c
delete mode 100644 arch/arm/boards/sama5d4ek/Makefile
delete mode 100644 arch/arm/boards/sama5d4ek/env/boot/nand
delete mode 100644 arch/arm/boards/sama5d4ek/env/init/mtdparts-nand
delete mode 100644 arch/arm/boards/sama5d4ek/env/init/mtdparts-nor
delete mode 100644 arch/arm/boards/sama5d4ek/env/init/splash
delete mode 100644 arch/arm/boards/sama5d4ek/env/nv/boot.default
delete mode 100644 arch/arm/boards/sama5d4ek/env/nv/hostname
delete mode 100644 arch/arm/boards/sama5d4ek/env/nv/linux.bootargs.console
delete mode 100644 arch/arm/boards/sama5d4ek/lowlevel.c
delete mode 100644 arch/arm/boards/sama5d4ek/sama5d4ek.c
delete mode 100644 arch/arm/configs/sama5d4_xplained_defconfig
delete mode 100644 arch/arm/configs/sama5d4ek_defconfig
diff --git a/arch/arm/boards/Makefile b/arch/arm/boards/Makefile
index 6e9e6798ba..fc8c032ec1 100644
--- a/arch/arm/boards/Makefile
+++ b/arch/arm/boards/Makefile
@@ -103,13 +103,10 @@ obj-$(CONFIG_MACH_SKOV_IMX8MP) += skov-imx8mp/
obj-$(CONFIG_MACH_FREESCALE_IMX6SX_SABRESDB) += freescale-mx6sx-sabresdb/
obj-$(CONFIG_MACH_SAMA5D27_GIANTBOARD) += sama5d27-giantboard/
obj-$(CONFIG_MACH_SAMA5D27_SOM1) += sama5d27-som1/
-obj-$(CONFIG_MACH_SAMA5D3XEK) += sama5d3xek/
obj-$(CONFIG_MACH_SAMA5D3_XPLAINED) += sama5d3_xplained/
obj-$(CONFIG_MACH_MICROCHIP_KSZ9477_EVB) += microchip-ksz9477-evb/
obj-$(CONFIG_MACH_MICROCHIP_SAMA5D3_EDS) += microchip-sama5d3-eds/
-obj-$(CONFIG_MACH_SAMA5D4_XPLAINED) += sama5d4_xplained/
obj-$(CONFIG_MACH_SAMA5D4_WIFX) += sama5d4_wifx/
-obj-$(CONFIG_MACH_SAMA5D4EK) += sama5d4ek/
obj-$(CONFIG_MACH_SCB9328) += scb9328/
obj-$(CONFIG_MACH_SEEED_ODYSSEY) += seeed-odyssey/
obj-$(CONFIG_MACH_SOCFPGA_ALTERA_SOCDK) += altera-socdk/
diff --git a/arch/arm/boards/sama5d3xek/Makefile b/arch/arm/boards/sama5d3xek/Makefile
deleted file mode 100644
index 9691f07917..0000000000
--- a/arch/arm/boards/sama5d3xek/Makefile
+++ /dev/null
@@ -1,6 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0-only
-
-obj-y += init.o
-obj-$(CONFIG_W1) += hw_version.o
-lwl-y += lowlevel.o
-bbenv-$(CONFIG_DEFAULT_ENVIRONMENT_GENERIC) += defaultenv-sama5d3xek
diff --git a/arch/arm/boards/sama5d3xek/defaultenv-sama5d3xek/bin/init_board b/arch/arm/boards/sama5d3xek/defaultenv-sama5d3xek/bin/init_board
deleted file mode 100644
index f3d417e356..0000000000
--- a/arch/arm/boards/sama5d3xek/defaultenv-sama5d3xek/bin/init_board
+++ /dev/null
@@ -1,15 +0,0 @@
-#!/bin/sh
-
-PATH=/env/bin
-export PATH
-
-. /env/config
-
-splash=/env/splash.png
-
-if [ -f ${splash} -a -e /dev/fb0 ]; then
- splash -o ${splash}
- fb0.enable=1
-fi
-
-exit 1
diff --git a/arch/arm/boards/sama5d3xek/defaultenv-sama5d3xek/config b/arch/arm/boards/sama5d3xek/defaultenv-sama5d3xek/config
deleted file mode 100644
index a7fd930ed1..0000000000
--- a/arch/arm/boards/sama5d3xek/defaultenv-sama5d3xek/config
+++ /dev/null
@@ -1,44 +0,0 @@
-#!/bin/sh
-
-# use 'dhcp' to do dhcp in barebox and in kernel
-# use 'none' if you want to skip kernel ip autoconfiguration
-ip=dhcp-barebox
-global.dhcp.vendor_id=barebox-sama5d3xek
-global.dhcp.client_id="${sama5d3xcm.board}-${sama5d3xcm.vendor}"
-
-# or set your networking parameters here
-#eth0.ipaddr=a.b.c.d
-#eth0.netmask=a.b.c.d
-#eth0.gateway=a.b.c.d
-#eth0.serverip=a.b.c.d
-
-# can be either 'nfs', 'tftp', 'nor' or 'nand'
-kernel_loc=nfs
-# can be either 'net', 'nor', 'nand' or 'initrd'
-rootfs_loc=net
-# can be either 'nfs', 'tftp', 'nand' or empty
-oftree_loc=nfs
-
-# can be either 'jffs2' or 'ubifs'
-rootfs_type=ubifs
-rootfsimage=root.$rootfs_type
-ubiroot=rootfs
-
-# The image type of the kernel. Can be uimage, zimage, raw, or raw_lzo
-kernelimage=zImage
-#kernelimage=uImage
-#kernelimage=Image
-#kernelimage=Image.lzo
-
-nand_device=atmel_nand
-nand_parts="256k(at91bootstrap),384k(barebox)ro,256k at 768k(bareboxenv),256k(bareboxenv2),128k at 1536k(oftree),5M at 2M(kernel),- at 8M(rootfs)"
-rootfs_mtdblock_nand=6
-
-m25p80_parts="64k(bootstrap),384k(barebox),256k(bareboxenv),256k(bareboxenv2),128k(oftree),-(updater)"
-
-autoboot_timeout=3
-
-bootargs="console=ttyS0,115200"
-
-# set a fancy prompt (if support is compiled in)
-PS1="\e[1;32mbarebox@\e[1;31m\h:\w\e[0m\n# "
diff --git a/arch/arm/boards/sama5d3xek/hw_version.c b/arch/arm/boards/sama5d3xek/hw_version.c
deleted file mode 100644
index c64d4566c6..0000000000
--- a/arch/arm/boards/sama5d3xek/hw_version.c
+++ /dev/null
@@ -1,236 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-// SPDX-FileCopyrightText: 2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj at jcrosoft.com>
-
-#include <common.h>
-#include <fs.h>
-#include <fcntl.h>
-#include <libbb.h>
-#include <libfile.h>
-#include <asm/armlinux.h>
-#include <of.h>
-
-#include "hw_version.h"
-
-enum board_type {
- BOARD_TYPE_MB,
- BOARD_TYPE_DM,
- BOARD_TYPE_CPU,
-};
-
-static struct board_info {
- char *name;
- enum board_type type;
- unsigned char id;
-} board_list[] = {
- {"SAMA5D3x-MB", BOARD_TYPE_MB, 0},
- {"SAMA5D3x-DM", BOARD_TYPE_DM, 1},
- {"SAMA5D31-CM", BOARD_TYPE_CPU, 2},
- {"SAMA5D33-CM", BOARD_TYPE_CPU, 3},
- {"SAMA5D34-CM", BOARD_TYPE_CPU, 4},
- {"SAMA5D35-CM", BOARD_TYPE_CPU, 5},
- {"PDA-DM", BOARD_TYPE_DM, 7},
-};
-
-static struct board_info* get_board_info_by_name(const char *name)
-{
- int i;
-
- for (i = 0; i < ARRAY_SIZE(board_list); i++) {
- char *bname = board_list[i].name;
- if (strncmp(name, bname, strlen(bname)) == 0)
- return &board_list[i];
- }
-
- return NULL;
-}
-
-static struct vendor_info {
- char *name;
- enum vendor_id id;
-} vendor_list[] = {
- {"EMBEST", VENDOR_EMBEST},
- {"FLEX", VENDOR_FLEX},
- {"RONETIX", VENDOR_RONETIX},
- {"COGENT", VENDOR_COGENT},
- {"PDA", VENDOR_PDA},
-};
-
-static struct vendor_info* get_vendor_info_by_name(const char *name)
-{
- int i;
-
- for (i = 0; i < ARRAY_SIZE(vendor_list); i++) {
- char *vname = vendor_list[i].name;
- if (strncmp(name, vname, strlen(vname)) == 0)
- return &vendor_list[i];
- }
-
- return NULL;
-}
-
-#define BOARD_NAME_LEN 12
-#define VENDOR_NAME_LEN 10
-#define VENDOR_COUNTRY_LEN 2
-
-struct one_wire_info {
- u8 total_bytes;
- u8 vendor_name[VENDOR_NAME_LEN];
- u8 vendor_country[VENDOR_COUNTRY_LEN];
- u8 board_name[BOARD_NAME_LEN];
- u8 year;
- u8 week;
- u8 revision_board;
- u8 revision_schema;
- u8 revision_bom;
- u8 checksum_l;
- u8 checksum_h;
-}__attribute__ ((packed));
-
-static int at91sama5d3xek_read_w1(const char *file, struct one_wire_info *info)
-{
- int fd;
- int ret;
-
- fd = open(file, O_RDONLY);
- if (fd < 0) {
- ret = fd;
- goto err;
- }
-
- ret = read_full(fd, info, sizeof(*info));
- if (ret < 0)
- goto err_open;
-
- if (ret < sizeof(*info)) {
- ret = -EINVAL;
- goto err_open;
- }
-
- pr_debug("total_bytes = %d\n", info->total_bytes);
- pr_debug("vendor_name = %s\n", info->vendor_name);
- pr_debug("vendor_country = %.2s\n", info->vendor_country);
- pr_debug("board_name = %s\n", info->board_name);
- pr_debug("year = %d\n", info->year);
- pr_debug("week = %d\n", info->week);
- pr_debug("revision_board = %x\n", info->revision_board);
- pr_debug("revision_schema = %x\n", info->revision_schema);
- pr_debug("revision_bom = %x\n", info->revision_bom);
- pr_debug("checksum_l = %x\n", info->checksum_l);
- pr_debug("checksum_h = %x\n", info->checksum_h);
-
- ret = 0;
-
-err_open:
- close(fd);
-err:
- if (ret)
- pr_err("can not read 1-wire %s (%s)\n", file, strerror(ret));
- return ret;
-}
-
-static u32 sn = 0;
-static u32 rev = 0;
-
-bool at91sama5d3xek_cm_is_vendor(enum vendor_id vid)
-{
- return ((sn >> 5) & 0x1f) == vid;
-}
-
-bool at91sama5d3xek_ek_is_vendor(enum vendor_id vid)
-{
- return ((sn >> 25) & 0x1f) == vid;
-}
-
-bool at91sama5d3xek_dm_is_vendor(enum vendor_id vid)
-{
- return ((sn >> 15) & 0x1f) == vid;
-}
-
-static void at91sama5d3xek_devices_detect_one(const char *name)
-{
- struct one_wire_info info;
- struct board_info* binfo;
- struct vendor_info* vinfo;
- struct device *dev = NULL;
- char str[16];
- char *bname, *vname;
- u8 vendor_id = 0;
-
- if (at91sama5d3xek_read_w1(name, &info))
- return;
-
- binfo = get_board_info_by_name(info.board_name);
-
- if (!binfo) {
- pr_err("board %s no supported\n", info.board_name);
- return;
- }
- bname = binfo->name;
-
- vinfo = get_vendor_info_by_name(info.vendor_name);
- vname = info.vendor_name;
- if (vinfo) {
- vendor_id = vinfo->id;
- vname = vinfo->name;
- }
-
- switch (binfo->type) {
- case BOARD_TYPE_CPU:
- dev = add_generic_device_res("sama5d3xcm", DEVICE_ID_SINGLE, NULL, 0, NULL);
- if (!dev)
- return;
- sn |= (binfo->id & 0x1f);
- sn |= ((vendor_id & 0x1f) << 5);
- rev |= (info.revision_board - 'A');
- rev |= (((info.revision_schema - '0') & 0x3) << 15);
- pr_info("CM");
- break;
- case BOARD_TYPE_MB:
- dev = add_generic_device_res("sama5d3xmb", DEVICE_ID_SINGLE, NULL, 0, NULL);
- if (!dev)
- return;
- sn |= ((binfo->id & 0x1f) << 20);
- sn |= ((vendor_id & 0x1f) << 25);
- rev |= ((info.revision_board - 'A') << 10);
- rev |= (((info.revision_schema - '0') & 0x3) << 21);
- pr_info("MB");
- break;
- case BOARD_TYPE_DM:
- dev = add_generic_device_res("sama5d3xdm", DEVICE_ID_SINGLE, NULL, 0, NULL);
- if (!dev)
- return;
- sn |= ((binfo->id & 0x1f) << 10);
- sn |= ((vendor_id & 0x1f) << 15);
- rev |= ((info.revision_board - 'A') << 5);
- rev |= (((info.revision_schema - '0') & 0x3) << 18);
- pr_info("DM");
- break;
- }
-
- pr_info(": %s [%c%c] from %s\n",
- bname, info.revision_board, info.revision_schema, vname);
-
- dev_add_param_fixed(dev, "vendor", vname);
- dev_add_param_fixed(dev, "board", bname);
- sprintf(str, "%.2s", info.vendor_country);
- dev_add_param_fixed(dev, "country", str);
- dev_add_param_uint32_fixed(dev, "year", info.year, "%u");
- dev_add_param_uint32_fixed(dev, "week", info.week, "%u");
- sprintf(str, "%c", info.revision_board);
- dev_add_param_fixed(dev, "revision_board", str);
- sprintf(str, "%c", info.revision_schema);
- dev_add_param_fixed(dev, "revision_schema", str);
- sprintf(str, "%c", info.revision_bom);
- dev_add_param_fixed(dev, "revision_bom", str);
-}
-
-void at91sama5d3xek_devices_detect_hw(void)
-{
- at91sama5d3xek_devices_detect_one("/dev/ds24310");
- at91sama5d3xek_devices_detect_one("/dev/ds28ec200");
- at91sama5d3xek_devices_detect_one("/dev/ds24330");
-
- pr_info("sn: 0x%x, rev: 0x%x\n", sn, rev);
- armlinux_set_revision(rev);
- armlinux_set_serial(sn);
-}
diff --git a/arch/arm/boards/sama5d3xek/hw_version.h b/arch/arm/boards/sama5d3xek/hw_version.h
deleted file mode 100644
index d90c751629..0000000000
--- a/arch/arm/boards/sama5d3xek/hw_version.h
+++ /dev/null
@@ -1,40 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-// SPDX-FileCopyrightText: 2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj at jcrosoft.com>
-
-#ifndef __HW_REVISION_H__
-#define __HW_REVISION_H__
-
-enum vendor_id {
- VENDOR_UNKNOWN = 0,
- VENDOR_EMBEST = 1,
- VENDOR_FLEX = 2,
- VENDOR_RONETIX = 3,
- VENDOR_COGENT = 4,
- VENDOR_PDA = 5,
-};
-
-#ifdef CONFIG_W1
-bool at91sama5d3xek_cm_is_vendor(enum vendor_id vid);
-bool at91sama5d3xek_ek_is_vendor(enum vendor_id vid);
-bool at91sama5d3xek_dm_is_vendor(enum vendor_id vid);
-void at91sama5d3xek_devices_detect_hw(void);
-#else
-bool at91sama5d3xek_cm_is_vendor(enum vendor_id vid)
-{
- return false;
-}
-
-bool at91sama5d3xek_ek_is_vendor(enum vendor_id vid)
-{
- return false;
-}
-
-bool at91sama5d3xek_dm_is_vendor(enum vendor_id vid)
-{
- return false;
-}
-
-void at91sama5d3xek_devices_detect_hw(void) {}
-#endif
-
-#endif /* __HW_REVISION_H__ */
diff --git a/arch/arm/boards/sama5d3xek/init.c b/arch/arm/boards/sama5d3xek/init.c
deleted file mode 100644
index b75856198e..0000000000
--- a/arch/arm/boards/sama5d3xek/init.c
+++ /dev/null
@@ -1,475 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-// SPDX-FileCopyrightText: 2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj at jcrosoft.com>
-
-#include <common.h>
-#include <net.h>
-#include <init.h>
-#include <environment.h>
-#include <asm/armlinux.h>
-#include <asm/mach-types.h>
-#include <fs.h>
-#include <fcntl.h>
-#include <io.h>
-#include <envfs.h>
-#include <mach/at91/hardware.h>
-#include <nand.h>
-#include <linux/sizes.h>
-#include <linux/mtd/nand.h>
-#include <linux/mtd/rawnand.h>
-#include <mach/at91/board.h>
-#include <mach/at91/at91sam9_smc.h>
-#include <gpio.h>
-#include <mach/at91/iomux.h>
-#include <mach/at91/at91_pmc.h>
-#include <mach/at91/at91_rstc.h>
-#include <mach/at91/at91sam9x5_matrix.h>
-#include <input/qt1070.h>
-#include <readkey.h>
-#include <poller.h>
-#include <linux/w1-gpio.h>
-#include <w1_mac_address.h>
-#include <spi/spi.h>
-#include <linux/clk.h>
-#include <linux/phy.h>
-#include <linux/micrel_phy.h>
-
-#include "hw_version.h"
-
-#ifdef CONFIG_W1_MASTER_GPIO
-struct w1_gpio_platform_data w1_pdata = {
- .pin = AT91_PIN_PE25,
- .ext_pullup_enable_pin = -EINVAL,
- .is_open_drain = 0,
-};
-#endif
-
-#if defined(CONFIG_NAND_ATMEL)
-static struct atmel_nand_data nand_pdata = {
- .ale = 21,
- .cle = 22,
- .det_pin = -EINVAL,
- .rdy_pin = -EINVAL,
- .enable_pin = -EINVAL,
- .ecc_mode = NAND_ECC_HW,
- .has_pmecc = 1,
- .pmecc_sector_size = 512,
- .pmecc_corr_cap = 4,
-#if defined(CONFIG_MTD_NAND_ATMEL_BUSWIDTH_16)
- .bus_width_16 = 1,
-#endif
- .on_flash_bbt = 1,
-};
-
-static struct sam9_smc_config cm_nand_smc_config = {
- .ncs_read_setup = 1,
- .nrd_setup = 2,
- .ncs_write_setup = 1,
- .nwe_setup = 2,
-
- .ncs_read_pulse = 5,
- .nrd_pulse = 3,
- .ncs_write_pulse = 5,
- .nwe_pulse = 3,
-
- .read_cycle = 8,
- .write_cycle = 8,
-
- .mode = AT91_SMC_READMODE | AT91_SMC_WRITEMODE | AT91_SMC_EXNWMODE_DISABLE,
- .tdf_cycles = 3,
-
- .tclr = 3,
- .tadl = 10,
- .tar = 3,
- .ocms = 0,
- .trr = 4,
- .twb = 5,
- .rbnsel = 3,
- .nfsel = 1
-};
-
-static void ek_add_device_nand(void)
-{
- struct clk *clk = clk_get(NULL, "smc_clk");
-
- clk_enable(clk);
-
- /* setup bus-width (8 or 16) */
- if (nand_pdata.bus_width_16)
- cm_nand_smc_config.mode |= AT91_SMC_DBW_16;
- else
- cm_nand_smc_config.mode |= AT91_SMC_DBW_8;
-
- /* configure chip-select 3 (NAND) */
- sama5_smc_configure(0, 3, &cm_nand_smc_config);
-
- at91_add_device_nand(&nand_pdata);
-}
-#else
-static void ek_add_device_nand(void) {}
-#endif
-
-#if defined(CONFIG_DRIVER_NET_MACB)
-static struct macb_platform_data gmac_pdata = {
- .phy_interface = PHY_INTERFACE_MODE_RGMII,
- .phy_addr = -1,
-};
-
-static struct macb_platform_data macb_pdata = {
- .phy_interface = PHY_INTERFACE_MODE_RMII,
- .phy_addr = -1,
-};
-
-static bool used_23 = false;
-static bool used_43 = false;
-
-static int ek_register_mac_address_23(int id)
-{
- if (used_23)
- return -EBUSY;
-
- used_23 = true;
-
- return w1_local_mac_address_register(id, "tml", "w1-23-0");
-}
-
-static int ek_register_mac_address_43(int id)
-{
- if (used_43)
- return -EBUSY;
-
- used_43 = true;
-
- return w1_local_mac_address_register(id, "tml", "w1-43-0");
-}
-
-static int ksz9021rn_phy_fixup(struct phy_device *phy)
-{
- int value;
-
-#define GMII_RCCPSR 260
-#define GMII_RRDPSR 261
-#define GMII_ERCR 11
-#define GMII_ERDWR 12
-
- /* Set delay values */
- value = GMII_RCCPSR | 0x8000;
- phy_write(phy, GMII_ERCR, value);
- value = 0xF2F4;
- phy_write(phy, GMII_ERDWR, value);
- value = GMII_RRDPSR | 0x8000;
- phy_write(phy, GMII_ERCR, value);
- value = 0x2222;
- phy_write(phy, GMII_ERDWR, value);
-
- return 0;
-}
-
-static void ek_add_device_eth(void)
-{
- if (w1_local_mac_address_register(0, "tml", "w1-2d-0"))
- if (ek_register_mac_address_23(0))
- ek_register_mac_address_43(0);
-
- if (ek_register_mac_address_23(1))
- ek_register_mac_address_43(1);
-
- phy_register_fixup_for_uid(PHY_ID_KSZ9021, MICREL_PHY_ID_MASK,
- ksz9021rn_phy_fixup);
-
- at91_add_device_eth(0, &gmac_pdata);
- at91_add_device_eth(1, &macb_pdata);
-}
-#else
-static void ek_add_device_eth(void) {}
-#endif
-
-#if defined(CONFIG_DRIVER_VIDEO_ATMEL_HLCD)
-/*
- * LCD Controller
- */
-static struct fb_videomode at91_tft_vga_modes[] = {
- {
- .name = "LG",
- .refresh = 60,
- .xres = 800, .yres = 480,
- .pixclock = KHZ2PICOS(33260),
-
- .left_margin = 88, .right_margin = 168,
- .upper_margin = 8, .lower_margin = 37,
- .hsync_len = 128, .vsync_len = 2,
-
- .sync = 0,
- .vmode = FB_VMODE_NONINTERLACED,
- },
-};
-
-/* Default output mode is TFT 24 bit */
-#define BPP_OUT_DEFAULT_LCDCFG5 (LCDC_LCDCFG5_MODE_OUTPUT_24BPP)
-
-/* Driver datas */
-static struct atmel_lcdfb_platform_data ek_lcdc_data = {
- .lcdcon_is_backlight = true,
- .default_bpp = 16,
- .default_dmacon = ATMEL_LCDC_DMAEN,
- .default_lcdcon2 = BPP_OUT_DEFAULT_LCDCFG5,
- .guard_time = 9,
- .lcd_wiring_mode = ATMEL_LCDC_WIRING_RGB,
- .mode_list = at91_tft_vga_modes,
- .num_modes = ARRAY_SIZE(at91_tft_vga_modes),
-};
-
-static void ek_add_device_lcdc(void)
-{
- at91_add_device_lcdc(&ek_lcdc_data);
-}
-
-#else
-static void ek_add_device_lcdc(void) {}
-#endif
-
-#if defined(CONFIG_MCI_ATMEL)
-/*
- * MCI (SD/MMC)
- */
-static struct atmel_mci_platform_data mci0_data = {
- .bus_width = 4,
- .detect_pin = AT91_PIN_PD17,
- .wp_pin = -EINVAL,
-};
-
-static struct atmel_mci_platform_data mci1_data = {
- .bus_width = 4,
- .detect_pin = AT91_PIN_PD18,
- .wp_pin = -EINVAL,
-};
-
-static void ek_add_device_mci(void)
-{
- /* MMC0 */
- at91_add_device_mci(0, &mci0_data);
- /* MMC1 */
- at91_add_device_mci(1, &mci1_data);
-}
-#else
-static void ek_add_device_mci(void) {}
-#endif
-
-#if defined(CONFIG_I2C_GPIO)
-struct qt1070_platform_data qt1070_pdata = {
- .irq_pin = AT91_PIN_PE31,
-};
-
-static struct i2c_board_info i2c_devices[] = {
- {
- .platform_data = &qt1070_pdata,
- I2C_BOARD_INFO("qt1070", 0x1b),
- },
-};
-
-static void ek_add_device_i2c(void)
-{
- at91_set_gpio_input(qt1070_pdata.irq_pin, 0);
- at91_set_deglitch(qt1070_pdata.irq_pin, 1);
- at91_add_device_i2c(1, i2c_devices, ARRAY_SIZE(i2c_devices));
- at91_add_device_i2c(0, NULL, 0);
-}
-#else
-static void ek_add_device_i2c(void) {}
-#endif
-
-#if defined(CONFIG_DRIVER_SPI_ATMEL)
-static const struct spi_board_info ek_spi_devices[] = {
- {
- .name = "m25p80",
- .chip_select = 0,
- .max_speed_hz = 30 * 1000 * 1000,
- .bus_num = 0,
- }
-};
-
-static unsigned spi0_standard_cs[] = { AT91_PIN_PD13 };
-static struct at91_spi_platform_data spi_pdata = {
- .chipselect = spi0_standard_cs,
- .num_chipselect = ARRAY_SIZE(spi0_standard_cs),
-};
-
-static void ek_add_device_spi(void)
-{
- spi_register_board_info(ek_spi_devices, ARRAY_SIZE(ek_spi_devices));
- at91_add_device_spi(0, &spi_pdata);
-}
-#else
-static void ek_add_device_spi(void) {}
-#endif
-
-#ifdef CONFIG_LED_GPIO
-struct gpio_led leds[] = {
- {
- .gpio = AT91_PIN_PE24,
- .active_low = 1,
- .led = {
- .name = "d1",
- },
- }, {
-#ifndef CONFIG_W1_MASTER_GPIO
- .gpio = AT91_PIN_PE25,
- .active_low = 1,
- .led = {
- .name = "d2",
- },
-#endif
- },
-};
-
-static void ek_add_led(void)
-{
- int i;
-
- for (i = 0; i < ARRAY_SIZE(leds); i++) {
- at91_set_gpio_output(leds[i].gpio, leds[i].active_low);
- led_gpio_register(&leds[i]);
- }
- led_set_trigger(LED_TRIGGER_HEARTBEAT, &leds[0].led);
-}
-#else
-static void ek_add_led(void) {}
-#endif
-
-static int at91sama5d3xek_mem_init(void)
-{
- at91_add_device_sdram(0);
-
- return 0;
-}
-mem_initcall(at91sama5d3xek_mem_init);
-
-#ifdef CONFIG_W1_MASTER_GPIO
-static void ek_add_device_w1(void)
-{
- at91_set_gpio_input(w1_pdata.pin, 0);
- at91_set_multi_drive(w1_pdata.pin, 1);
- add_generic_device_res("w1-gpio", DEVICE_ID_SINGLE, NULL, 0, &w1_pdata);
-
- at91sama5d3xek_devices_detect_hw();
-}
-#else
-static void ek_add_device_w1(void) {}
-#endif
-
-#ifdef CONFIG_POLLER
-/*
- * The SiI9022A (HDMI) and QT1070 share the same irq
- * but if the SiI9022A is not reset the irq is pull down
- * So do it. As the SiI9022A need 1s to reset (500ms up then 500ms down then up)
- * do it poller to do not slow down the boot
- */
-static int hdmi_reset_pin = AT91_PIN_PC31;
-static uint64_t hdmi_reset_start;
-struct poller_struct hdmi_poller;
-
-static void hdmi_on_poller(struct poller_struct *poller)
-{
- if (!is_timeout_non_interruptible(hdmi_reset_start, 500 * MSECOND))
- return;
-
- gpio_set_value(hdmi_reset_pin, 1);
-
- poller_unregister(poller);
- ek_add_device_i2c();
-}
-
-static void hdmi_off_poller(struct poller_struct *poller)
-{
- if (!is_timeout_non_interruptible(hdmi_reset_start, 500 * MSECOND))
- return;
-
- gpio_set_value(hdmi_reset_pin, 0);
-
- hdmi_reset_start = get_time_ns();
- poller->func = hdmi_on_poller;
-}
-
-static void ek_add_device_hdmi(void)
-{
- at91_set_gpio_output(hdmi_reset_pin, 1);
- hdmi_reset_start = get_time_ns();
- hdmi_poller.func = hdmi_off_poller;
-
- poller_register(&hdmi_poller, "hdmi-reset");
-}
-#else
-static void ek_add_device_hdmi(void)
-{
- ek_add_device_i2c();
-}
-#endif
-
-static const struct devfs_partition at91sama5d3xek_nand0_partitions[] = {
- {
- .offset = 0x00000,
- .size = SZ_256K,
- .flags = DEVFS_PARTITION_FIXED,
- .name = "at91bootstrap_raw",
- .bbname = "at91bootstrap",
- }, {
- .offset = DEVFS_PARTITION_APPEND, /* 256 KiB */
- .size = SZ_256K + SZ_128K,
- .flags = DEVFS_PARTITION_FIXED,
- .name = "self_raw",
- .bbname = "self0",
- },
- /* hole of 128 KiB */
- {
- .offset = SZ_512K + SZ_256K,
- .size = SZ_256K,
- .flags = DEVFS_PARTITION_FIXED,
- .name = "env_raw",
- .bbname = "env0",
- }, {
- .offset = DEVFS_PARTITION_APPEND, /* 1 MiB */
- .size = SZ_256K,
- .flags = DEVFS_PARTITION_FIXED,
- .name = "env_raw1",
- .bbname = "env1",
- }, {
- /* sentinel */
- }
-};
-
-static int at91sama5d3xek_devices_init(void)
-{
- ek_add_device_w1();
- ek_add_device_hdmi();
- ek_add_device_nand();
- ek_add_led();
- ek_add_device_eth();
- ek_add_device_spi();
- ek_add_device_mci();
- ek_add_device_lcdc();
-
- devfs_create_partitions("nand0", at91sama5d3xek_nand0_partitions);
-
- if (IS_ENABLED(CONFIG_DEFAULT_ENVIRONMENT_GENERIC))
- defaultenv_append_directory(defaultenv_sama5d3xek);
-
- return 0;
-}
-device_initcall(at91sama5d3xek_devices_init);
-
-static int at91sama5d3xek_console_init(void)
-{
- barebox_set_model("Atmel sama5d3x-ek");
- barebox_set_hostname("sama5d3x-ek");
-
- at91_register_uart(0, 0);
- at91_register_uart(2, 0);
- return 0;
-}
-console_initcall(at91sama5d3xek_console_init);
-
-static int at91sama5d3xek_main_clock(void)
-{
- at91_set_main_clock(12000000);
- return 0;
-}
-pure_initcall(at91sama5d3xek_main_clock);
diff --git a/arch/arm/boards/sama5d3xek/lowlevel.c b/arch/arm/boards/sama5d3xek/lowlevel.c
deleted file mode 100644
index fe5f172127..0000000000
--- a/arch/arm/boards/sama5d3xek/lowlevel.c
+++ /dev/null
@@ -1,23 +0,0 @@
-/*
- * Copyright (C) 2009-2013 Jean-Christophe PLAGNIOL-VILLARD <plagnioj at jcrosoft.com>
- *
- * Under GPLv2
- */
-
-#include <common.h>
-#include <init.h>
-
-#include <asm/barebox-arm-head.h>
-#include <asm/barebox-arm.h>
-
-#include <mach/at91/at91_ddrsdrc.h>
-#include <mach/at91/hardware.h>
-
-void __naked __bare_init barebox_arm_reset_vector(uint32_t r0, uint32_t r1, uint32_t r2)
-{
- arm_cpu_lowlevel_init();
-
- arm_setup_stack(SAMA5D3_SRAM_BASE + SAMA5D3_SRAM_SIZE);
-
- barebox_arm_entry(SAMA5_DDRCS, at91sama5d3_get_ddram_size(), NULL);
-}
diff --git a/arch/arm/boards/sama5d4_xplained/Makefile b/arch/arm/boards/sama5d4_xplained/Makefile
deleted file mode 100644
index eece4cc381..0000000000
--- a/arch/arm/boards/sama5d4_xplained/Makefile
+++ /dev/null
@@ -1,4 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0-only
-
-obj-y += sama5d4_xplained.o
-lwl-y += lowlevel.o
diff --git a/arch/arm/boards/sama5d4_xplained/env/boot/mmc b/arch/arm/boards/sama5d4_xplained/env/boot/mmc
deleted file mode 100644
index 75a0f9b696..0000000000
--- a/arch/arm/boards/sama5d4_xplained/env/boot/mmc
+++ /dev/null
@@ -1,8 +0,0 @@
-#!/bin/sh
-
-global.bootm.oftree="/mnt/mmcblk0p1/at91-sama5d4_xplained.dtb"
-global.bootm.image="/mnt/mmcblk0p1/zImage"
-
-bootargs-ip
-
-global.linux.bootargs.dyn.root="root=/dev/mmcblk0p2 rw rootwait"
diff --git a/arch/arm/boards/sama5d4_xplained/env/boot/nand b/arch/arm/boards/sama5d4_xplained/env/boot/nand
deleted file mode 100644
index d1485c6c86..0000000000
--- a/arch/arm/boards/sama5d4_xplained/env/boot/nand
+++ /dev/null
@@ -1,8 +0,0 @@
-#!/bin/sh
-
-global.bootm.image="/dev/nand0.kernel.bb"
-global.bootm.oftree="/dev/nand0.oftree.bb"
-
-bootargs-ip
-
-global.linux.bootargs.dyn.root="root=ubi0:rootfs ubi.mtd=rootfs rootfstype=ubifs noinitrd"
diff --git a/arch/arm/boards/sama5d4_xplained/env/init/automount b/arch/arm/boards/sama5d4_xplained/env/init/automount
deleted file mode 100644
index 3476922753..0000000000
--- a/arch/arm/boards/sama5d4_xplained/env/init/automount
+++ /dev/null
@@ -1,5 +0,0 @@
-#!/bin/sh
-
-# SD card slot, first partition
-mkdir -p /mnt/mmcblk0p1
-automount -d /mnt/mmcblk0p1 'mount /dev/disk0.0 /mnt/mmcblk0p1'
diff --git a/arch/arm/boards/sama5d4_xplained/env/init/mtdparts-nand b/arch/arm/boards/sama5d4_xplained/env/init/mtdparts-nand
deleted file mode 100644
index c947910643..0000000000
--- a/arch/arm/boards/sama5d4_xplained/env/init/mtdparts-nand
+++ /dev/null
@@ -1,6 +0,0 @@
-#!/bin/sh
-
-mtdparts="256k(at91bootstrap),512k(barebox)ro,256k(bareboxenv),256k(bareboxenv2),256k(spare),512k(oftree),6M(kernel),-(rootfs)"
-kernelname="atmel_nand"
-
-mtdparts-add -b -d nand0 -k ${kernelname} -p ${mtdparts}
diff --git a/arch/arm/boards/sama5d4_xplained/env/init/splash b/arch/arm/boards/sama5d4_xplained/env/init/splash
deleted file mode 100644
index f3d417e356..0000000000
--- a/arch/arm/boards/sama5d4_xplained/env/init/splash
+++ /dev/null
@@ -1,15 +0,0 @@
-#!/bin/sh
-
-PATH=/env/bin
-export PATH
-
-. /env/config
-
-splash=/env/splash.png
-
-if [ -f ${splash} -a -e /dev/fb0 ]; then
- splash -o ${splash}
- fb0.enable=1
-fi
-
-exit 1
diff --git a/arch/arm/boards/sama5d4_xplained/env/nv/boot.default b/arch/arm/boards/sama5d4_xplained/env/nv/boot.default
deleted file mode 100644
index 026a25cc7e..0000000000
--- a/arch/arm/boards/sama5d4_xplained/env/nv/boot.default
+++ /dev/null
@@ -1 +0,0 @@
-nand
diff --git a/arch/arm/boards/sama5d4_xplained/env/nv/linux.bootargs.console b/arch/arm/boards/sama5d4_xplained/env/nv/linux.bootargs.console
deleted file mode 100644
index 476b1fbe49..0000000000
--- a/arch/arm/boards/sama5d4_xplained/env/nv/linux.bootargs.console
+++ /dev/null
@@ -1 +0,0 @@
-console=ttyS0,115200
diff --git a/arch/arm/boards/sama5d4_xplained/lowlevel.c b/arch/arm/boards/sama5d4_xplained/lowlevel.c
deleted file mode 100644
index 183bd9c5a9..0000000000
--- a/arch/arm/boards/sama5d4_xplained/lowlevel.c
+++ /dev/null
@@ -1,23 +0,0 @@
-/*
- * Copyright (C) 2009-2013 Jean-Christophe PLAGNIOL-VILLARD <plagnioj at jcrosoft.com>
- *
- * Under GPLv2
- */
-
-#include <common.h>
-#include <init.h>
-
-#include <asm/barebox-arm-head.h>
-#include <asm/barebox-arm.h>
-
-#include <mach/at91/at91_ddrsdrc.h>
-#include <mach/at91/hardware.h>
-
-void __naked __bare_init barebox_arm_reset_vector(uint32_t r0, uint32_t r1, uint32_t r2)
-{
- arm_cpu_lowlevel_init();
-
- arm_setup_stack(SAMA5D4_SRAM_BASE + SAMA5D4_SRAM_SIZE);
-
- barebox_arm_entry(SAMA5_DDRCS, at91sama5d4_get_ddram_size(), NULL);
-}
diff --git a/arch/arm/boards/sama5d4_xplained/sama5d4_xplained.c b/arch/arm/boards/sama5d4_xplained/sama5d4_xplained.c
deleted file mode 100644
index c88f0d090a..0000000000
--- a/arch/arm/boards/sama5d4_xplained/sama5d4_xplained.c
+++ /dev/null
@@ -1,320 +0,0 @@
-/*
- * SAMA5D4 XPLAINED ULTRA board configuration.
- *
- * Copyright (C) 2014 Atmel Corporation,
- * Bo Shen <voice.shen at atmel.com>
- *
- * Licensed under GPLv2 or later.
- */
-
-#include <common.h>
-#include <net.h>
-#include <init.h>
-#include <environment.h>
-#include <asm/armlinux.h>
-#include <fs.h>
-#include <fcntl.h>
-#include <io.h>
-#include <mach/at91/hardware.h>
-#include <nand.h>
-#include <linux/sizes.h>
-#include <linux/mtd/nand.h>
-#include <linux/mtd/rawnand.h>
-#include <mach/at91/board.h>
-#include <mach/at91/at91sam9_smc.h>
-#include <gpio.h>
-#include <mach/at91/iomux.h>
-#include <mach/at91/at91_pmc.h>
-#include <mach/at91/at91_rstc.h>
-#include <mach/at91/at91sam9x5_matrix.h>
-#include <input/qt1070.h>
-#include <readkey.h>
-#include <spi/spi.h>
-#include <linux/clk.h>
-
-#if defined(CONFIG_NAND_ATMEL)
-static struct atmel_nand_data nand_pdata = {
- .ale = 21,
- .cle = 22,
- .det_pin = -EINVAL,
- .rdy_pin = -EINVAL,
- .enable_pin = -EINVAL,
- .ecc_mode = NAND_ECC_HW,
- .has_pmecc = 1,
- .pmecc_sector_size = 512,
- .pmecc_corr_cap = 8,
- .on_flash_bbt = 1,
-};
-
-static struct sam9_smc_config cm_nand_smc_config = {
- .ncs_read_setup = 1,
- .nrd_setup = 1,
- .ncs_write_setup = 1,
- .nwe_setup = 1,
-
- .ncs_read_pulse = 3,
- .nrd_pulse = 2,
- .ncs_write_pulse = 3,
- .nwe_pulse = 2,
-
- .read_cycle = 5,
- .write_cycle = 5,
-
- .mode = AT91_SMC_READMODE | AT91_SMC_WRITEMODE | AT91_SMC_EXNWMODE_DISABLE,
- .tdf_cycles = 3,
-
- .tclr = 2,
- .tadl = 7,
- .tar = 2,
- .ocms = 0,
- .trr = 3,
- .twb = 7,
- .rbnsel = 3,
- .nfsel = 1,
-};
-
-static void ek_add_device_nand(void)
-{
- struct clk *clk = clk_get(NULL, "smc_clk");
-
- clk_enable(clk);
-
- /* configure chip-select 3 (NAND) */
- sama5_smc_configure(0, 3, &cm_nand_smc_config);
-
- at91_add_device_nand(&nand_pdata);
-}
-#else
-static void ek_add_device_nand(void) {}
-#endif
-
-#if defined(CONFIG_DRIVER_NET_MACB)
-static struct macb_platform_data macb0_pdata = {
- .phy_interface = PHY_INTERFACE_MODE_RMII,
- .phy_addr = 0,
-};
-
-static void ek_add_device_eth(void)
-{
- at91_add_device_eth(0, &macb0_pdata);
-}
-#else
-static void ek_add_device_eth(void) {}
-#endif
-
-#if defined(CONFIG_DRIVER_VIDEO_ATMEL_HLCD)
-static struct fb_videomode at91_tft_vga_modes[] = {
- {
- .name = "TM4301",
- .refresh = 60,
- .xres = 480, .yres = 272,
- .pixclock = KHZ2PICOS(9000),
-
- .left_margin = 2, .right_margin = 2,
- .upper_margin = 2, .lower_margin = 2,
- .hsync_len = 41, .vsync_len = 11,
-
- .sync = 0,
- .vmode = FB_VMODE_NONINTERLACED,
- },
-};
-
-/* Output mode is TFT 24 bits */
-#define BPP_OUT_DEFAULT_LCDCFG5 (LCDC_LCDCFG5_MODE_OUTPUT_24BPP)
-
-static struct atmel_lcdfb_platform_data ek_lcdc_data = {
- .lcdcon_is_backlight = true,
- .default_bpp = 16,
- .default_dmacon = ATMEL_LCDC_DMAEN,
- .default_lcdcon2 = BPP_OUT_DEFAULT_LCDCFG5,
- .guard_time = 9,
- .lcd_wiring_mode = ATMEL_LCDC_WIRING_RGB,
- .mode_list = at91_tft_vga_modes,
- .num_modes = ARRAY_SIZE(at91_tft_vga_modes),
-};
-
-static void ek_add_device_lcdc(void)
-{
- /* On sama5d4 xplained ultra board, we use 24bits connection */
- at91_set_A_periph(AT91_PIN_PA0, 0); /* LCDD0 */
- at91_set_A_periph(AT91_PIN_PA1, 0); /* LCDD1 */
- at91_set_A_periph(AT91_PIN_PA8, 0); /* LCDD8 */
- at91_set_A_periph(AT91_PIN_PA9, 0); /* LCDD9 */
- at91_set_A_periph(AT91_PIN_PA16, 0); /* LCDD16 */
- at91_set_A_periph(AT91_PIN_PA17, 0); /* LCDD17 */
-
- at91_add_device_lcdc(&ek_lcdc_data);
-}
-#else
-static void ek_add_device_lcdc(void) {}
-#endif
-
-#if defined(CONFIG_MCI_ATMEL)
-static struct atmel_mci_platform_data mci1_data = {
- .bus_width = 4,
- .detect_pin = AT91_PIN_PE3,
- .wp_pin = -EINVAL,
-};
-
-static void ek_add_device_mci(void)
-{
- /* MMC1 */
- at91_add_device_mci(1, &mci1_data);
-
- /* power on MCI1 */
- at91_set_gpio_output(AT91_PIN_PE4, 0);
-}
-#else
-static void ek_add_device_mci(void) {}
-#endif
-
-#if defined(CONFIG_I2C_GPIO)
-struct qt1070_platform_data qt1070_pdata = {
- .irq_pin = AT91_PIN_PE10,
-};
-
-static struct i2c_board_info i2c_devices[] = {
- {
- .platform_data = &qt1070_pdata,
- I2C_BOARD_INFO("qt1070", 0x1b),
- },
-};
-
-static void ek_add_device_i2c(void)
-{
- at91_set_gpio_input(qt1070_pdata.irq_pin, 0);
- at91_set_deglitch(qt1070_pdata.irq_pin, 1);
- at91_add_device_i2c(0, i2c_devices, ARRAY_SIZE(i2c_devices));
-}
-#else
-static void ek_add_device_i2c(void) {}
-#endif
-
-#if defined(CONFIG_DRIVER_SPI_ATMEL)
-static const struct spi_board_info ek_spi_devices[] = {
- {
- .name = "m25p80",
- .chip_select = 0,
- .max_speed_hz = 30 * 1000 * 1000,
- .bus_num = 0,
- }
-};
-
-static unsigned spi0_standard_cs[] = { AT91_PIN_PC3 };
-static struct at91_spi_platform_data spi_pdata = {
- .chipselect = spi0_standard_cs,
- .num_chipselect = ARRAY_SIZE(spi0_standard_cs),
-};
-
-static void ek_add_device_spi(void)
-{
- spi_register_board_info(ek_spi_devices, ARRAY_SIZE(ek_spi_devices));
- at91_add_device_spi(0, &spi_pdata);
-}
-#else
-static void ek_add_device_spi(void) {}
-#endif
-
-#ifdef CONFIG_LED_GPIO
-struct gpio_led leds[] = {
- {
- .gpio = AT91_PIN_PD30,
- .active_low = 0,
- .led = {
- .name = "d8",
- },
- }, {
- .gpio = AT91_PIN_PE15,
- .active_low = 0,
- .led = {
- .name = "d10",
- },
- },
-};
-
-static void ek_add_led(void)
-{
- int i;
-
- for (i = 0; i < ARRAY_SIZE(leds); i++) {
- at91_set_gpio_output(leds[i].gpio, leds[i].active_low);
- led_gpio_register(&leds[i]);
- }
- led_set_trigger(LED_TRIGGER_HEARTBEAT, &leds[0].led);
-}
-#else
-static void ek_add_led(void) {}
-#endif
-
-static int sama5d4_xplained_mem_init(void)
-{
- at91_add_device_sdram(0);
-
- return 0;
-}
-mem_initcall(sama5d4_xplained_mem_init);
-
-static const struct devfs_partition sama5d4_xplained_nand0_partitions[] = {
- {
- .offset = 0x00000,
- .size = SZ_256K,
- .flags = DEVFS_PARTITION_FIXED,
- .name = "at91bootstrap_raw",
- .bbname = "at91bootstrap",
- }, {
- .offset = DEVFS_PARTITION_APPEND,
- .size = SZ_512K,
- .flags = DEVFS_PARTITION_FIXED,
- .name = "bootloader_raw",
- .bbname = "bootloader",
- }, {
- .offset = DEVFS_PARTITION_APPEND,
- .size = SZ_256K,
- .flags = DEVFS_PARTITION_FIXED,
- .name = "env_raw",
- .bbname = "env0",
- }, {
- .offset = DEVFS_PARTITION_APPEND,
- .size = SZ_256K,
- .flags = DEVFS_PARTITION_FIXED,
- .name = "env_raw1",
- .bbname = "env1",
- }, {
- /* sentinel */
- }
-};
-
-static int sama5d4_xplained_devices_init(void)
-{
- ek_add_device_i2c();
- ek_add_device_nand();
- ek_add_led();
- ek_add_device_eth();
- ek_add_device_spi();
- ek_add_device_mci();
- ek_add_device_lcdc();
-
- devfs_create_partitions("nand0", sama5d4_xplained_nand0_partitions);
-
- return 0;
-}
-device_initcall(sama5d4_xplained_devices_init);
-
-static int sama5d4_xplained_console_init(void)
-{
- barebox_set_model("Atmel sama5d4_xplained");
- barebox_set_hostname("sama5d4_xplained");
-
- at91_register_uart(4, 0);
-
- return 0;
-}
-console_initcall(sama5d4_xplained_console_init);
-
-static int sama5d4_xplained_main_clock(void)
-{
- at91_set_main_clock(12000000);
-
- return 0;
-}
-pure_initcall(sama5d4_xplained_main_clock);
diff --git a/arch/arm/boards/sama5d4ek/Makefile b/arch/arm/boards/sama5d4ek/Makefile
deleted file mode 100644
index 82ffe9771c..0000000000
--- a/arch/arm/boards/sama5d4ek/Makefile
+++ /dev/null
@@ -1,4 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0-only
-
-obj-y += sama5d4ek.o
-lwl-y += lowlevel.o
diff --git a/arch/arm/boards/sama5d4ek/env/boot/nand b/arch/arm/boards/sama5d4ek/env/boot/nand
deleted file mode 100644
index 29489bf613..0000000000
--- a/arch/arm/boards/sama5d4ek/env/boot/nand
+++ /dev/null
@@ -1,6 +0,0 @@
-#!/bin/sh
-
-global.bootm.image="/dev/nand0.kernel.bb"
-global.bootm.oftree="/dev/nand0.oftree.bb"
-
-global.linux.bootargs.dyn.root="root=ubi0:rootfs ubi.mtd=rootfs rootfstype=ubifs noinitrd"
diff --git a/arch/arm/boards/sama5d4ek/env/init/mtdparts-nand b/arch/arm/boards/sama5d4ek/env/init/mtdparts-nand
deleted file mode 100644
index c947910643..0000000000
--- a/arch/arm/boards/sama5d4ek/env/init/mtdparts-nand
+++ /dev/null
@@ -1,6 +0,0 @@
-#!/bin/sh
-
-mtdparts="256k(at91bootstrap),512k(barebox)ro,256k(bareboxenv),256k(bareboxenv2),256k(spare),512k(oftree),6M(kernel),-(rootfs)"
-kernelname="atmel_nand"
-
-mtdparts-add -b -d nand0 -k ${kernelname} -p ${mtdparts}
diff --git a/arch/arm/boards/sama5d4ek/env/init/mtdparts-nor b/arch/arm/boards/sama5d4ek/env/init/mtdparts-nor
deleted file mode 100644
index 01fa752c3c..0000000000
--- a/arch/arm/boards/sama5d4ek/env/init/mtdparts-nor
+++ /dev/null
@@ -1,6 +0,0 @@
-#!/bin/sh
-
-mtdparts="64k(bootstrap),64k(bareboxenv),512k(barebox),384k(oftree),-(kernel)"
-kernelname="m25p800"
-
-mtdparts-add -d m25p0 -k ${kernelname} -p ${mtdparts}
diff --git a/arch/arm/boards/sama5d4ek/env/init/splash b/arch/arm/boards/sama5d4ek/env/init/splash
deleted file mode 100644
index 190ef3149e..0000000000
--- a/arch/arm/boards/sama5d4ek/env/init/splash
+++ /dev/null
@@ -1,10 +0,0 @@
-#!/bin/sh
-
-splash=/env/splash.png
-
-if [ -f ${splash} -a -e /dev/fb0 ]; then
- splash -o ${splash}
- fb0.enable=1
-fi
-
-exit 1
diff --git a/arch/arm/boards/sama5d4ek/env/nv/boot.default b/arch/arm/boards/sama5d4ek/env/nv/boot.default
deleted file mode 100644
index d287b22cbb..0000000000
--- a/arch/arm/boards/sama5d4ek/env/nv/boot.default
+++ /dev/null
@@ -1 +0,0 @@
-nand net
diff --git a/arch/arm/boards/sama5d4ek/env/nv/hostname b/arch/arm/boards/sama5d4ek/env/nv/hostname
deleted file mode 100644
index b74056d082..0000000000
--- a/arch/arm/boards/sama5d4ek/env/nv/hostname
+++ /dev/null
@@ -1 +0,0 @@
-sama5d4ek
diff --git a/arch/arm/boards/sama5d4ek/env/nv/linux.bootargs.console b/arch/arm/boards/sama5d4ek/env/nv/linux.bootargs.console
deleted file mode 100644
index 476b1fbe49..0000000000
--- a/arch/arm/boards/sama5d4ek/env/nv/linux.bootargs.console
+++ /dev/null
@@ -1 +0,0 @@
-console=ttyS0,115200
diff --git a/arch/arm/boards/sama5d4ek/lowlevel.c b/arch/arm/boards/sama5d4ek/lowlevel.c
deleted file mode 100644
index 183bd9c5a9..0000000000
--- a/arch/arm/boards/sama5d4ek/lowlevel.c
+++ /dev/null
@@ -1,23 +0,0 @@
-/*
- * Copyright (C) 2009-2013 Jean-Christophe PLAGNIOL-VILLARD <plagnioj at jcrosoft.com>
- *
- * Under GPLv2
- */
-
-#include <common.h>
-#include <init.h>
-
-#include <asm/barebox-arm-head.h>
-#include <asm/barebox-arm.h>
-
-#include <mach/at91/at91_ddrsdrc.h>
-#include <mach/at91/hardware.h>
-
-void __naked __bare_init barebox_arm_reset_vector(uint32_t r0, uint32_t r1, uint32_t r2)
-{
- arm_cpu_lowlevel_init();
-
- arm_setup_stack(SAMA5D4_SRAM_BASE + SAMA5D4_SRAM_SIZE);
-
- barebox_arm_entry(SAMA5_DDRCS, at91sama5d4_get_ddram_size(), NULL);
-}
diff --git a/arch/arm/boards/sama5d4ek/sama5d4ek.c b/arch/arm/boards/sama5d4ek/sama5d4ek.c
deleted file mode 100644
index 0dda34614a..0000000000
--- a/arch/arm/boards/sama5d4ek/sama5d4ek.c
+++ /dev/null
@@ -1,318 +0,0 @@
-/*
- * SAMA5D4EK board configuration.
- *
- * Copyright (C) 2014 Atmel Corporation,
- * Bo Shen <voice.shen at atmel.com>
- *
- * Licensed under GPLv2 or later.
- */
-
-#include <common.h>
-#include <net.h>
-#include <init.h>
-#include <environment.h>
-#include <asm/armlinux.h>
-#include <fs.h>
-#include <fcntl.h>
-#include <io.h>
-#include <mach/at91/hardware.h>
-#include <nand.h>
-#include <linux/sizes.h>
-#include <linux/mtd/nand.h>
-#include <linux/mtd/rawnand.h>
-#include <mach/at91/board.h>
-#include <mach/at91/at91sam9_smc.h>
-#include <gpio.h>
-#include <mach/at91/iomux.h>
-#include <mach/at91/at91_pmc.h>
-#include <mach/at91/at91_rstc.h>
-#include <mach/at91/at91sam9x5_matrix.h>
-#include <input/qt1070.h>
-#include <readkey.h>
-#include <spi/spi.h>
-#include <linux/clk.h>
-
-#if defined(CONFIG_NAND_ATMEL)
-static struct atmel_nand_data nand_pdata = {
- .ale = 21,
- .cle = 22,
- .det_pin = -EINVAL,
- .rdy_pin = -EINVAL,
- .enable_pin = -EINVAL,
- .ecc_mode = NAND_ECC_HW,
- .has_pmecc = 1,
- .pmecc_sector_size = 512,
- .pmecc_corr_cap = 8,
- .on_flash_bbt = 1,
-};
-
-static struct sam9_smc_config cm_nand_smc_config = {
- .ncs_read_setup = 1,
- .nrd_setup = 1,
- .ncs_write_setup = 1,
- .nwe_setup = 1,
-
- .ncs_read_pulse = 3,
- .nrd_pulse = 2,
- .ncs_write_pulse = 3,
- .nwe_pulse = 2,
-
- .read_cycle = 5,
- .write_cycle = 5,
-
- .mode = AT91_SMC_READMODE | AT91_SMC_WRITEMODE | AT91_SMC_EXNWMODE_DISABLE,
- .tdf_cycles = 3,
-
- .tclr = 2,
- .tadl = 7,
- .tar = 2,
- .ocms = 0,
- .trr = 3,
- .twb = 7,
- .rbnsel = 3,
- .nfsel = 1,
-};
-
-static void ek_add_device_nand(void)
-{
- struct clk *clk = clk_get(NULL, "smc_clk");
-
- clk_enable(clk);
-
- /* configure chip-select 3 (NAND) */
- sama5_smc_configure(0, 3, &cm_nand_smc_config);
-
- at91_add_device_nand(&nand_pdata);
-}
-#else
-static void ek_add_device_nand(void) {}
-#endif
-
-#if defined(CONFIG_DRIVER_NET_MACB)
-static struct macb_platform_data macb0_pdata = {
- .phy_interface = PHY_INTERFACE_MODE_RMII,
- .phy_addr = 0,
-};
-
-static void ek_add_device_eth(void)
-{
- at91_add_device_eth(0, &macb0_pdata);
-}
-#else
-static void ek_add_device_eth(void) {}
-#endif
-
-#if defined(CONFIG_DRIVER_VIDEO_ATMEL_HLCD)
-static struct fb_videomode at91_tft_vga_modes[] = {
- {
- .name = "LG",
- .refresh = 60,
- .xres = 800, .yres = 480,
- .pixclock = KHZ2PICOS(33260),
-
- .left_margin = 88, .right_margin = 168,
- .upper_margin = 8, .lower_margin = 37,
- .hsync_len = 128, .vsync_len = 2,
-
- .sync = 0,
- .vmode = FB_VMODE_NONINTERLACED,
- },
-};
-
-/* Output mode is TFT 18 bits */
-#define BPP_OUT_DEFAULT_LCDCFG5 (LCDC_LCDCFG5_MODE_OUTPUT_18BPP)
-
-static struct atmel_lcdfb_platform_data ek_lcdc_data = {
- .lcdcon_is_backlight = true,
- .default_bpp = 16,
- .default_dmacon = ATMEL_LCDC_DMAEN,
- .default_lcdcon2 = BPP_OUT_DEFAULT_LCDCFG5,
- .guard_time = 9,
- .lcd_wiring_mode = ATMEL_LCDC_WIRING_RGB,
- .mode_list = at91_tft_vga_modes,
- .num_modes = ARRAY_SIZE(at91_tft_vga_modes),
-};
-
-static void ek_add_device_lcdc(void)
-{
- at91_add_device_lcdc(&ek_lcdc_data);
-}
-#else
-static void ek_add_device_lcdc(void) {}
-#endif
-
-#if defined(CONFIG_MCI_ATMEL)
-static struct atmel_mci_platform_data mci1_data = {
- .bus_width = 4,
- .detect_pin = AT91_PIN_PE6,
- .wp_pin = -EINVAL,
-};
-
-static void ek_add_device_mci(void)
-{
- /* MMC1 */
- at91_add_device_mci(1, &mci1_data);
-
- /* power on MCI1 */
- at91_set_gpio_output(AT91_PIN_PE15, 0);
-}
-#else
-static void ek_add_device_mci(void) {}
-#endif
-
-#if defined(CONFIG_I2C_GPIO)
-struct qt1070_platform_data qt1070_pdata = {
- .irq_pin = AT91_PIN_PE25,
-};
-
-static struct i2c_board_info i2c_devices[] = {
- {
- .platform_data = &qt1070_pdata,
- I2C_BOARD_INFO("qt1070", 0x1b),
- },
-};
-
-static void ek_add_device_i2c(void)
-{
- at91_set_gpio_input(qt1070_pdata.irq_pin, 0);
- at91_set_deglitch(qt1070_pdata.irq_pin, 1);
- at91_add_device_i2c(0, i2c_devices, ARRAY_SIZE(i2c_devices));
-}
-#else
-static void ek_add_device_i2c(void) {}
-#endif
-
-#if defined(CONFIG_DRIVER_SPI_ATMEL)
-static const struct spi_board_info ek_spi_devices[] = {
- {
- .name = "m25p80",
- .chip_select = 0,
- .max_speed_hz = 30 * 1000 * 1000,
- .bus_num = 0,
- }
-};
-
-static unsigned spi0_standard_cs[] = { AT91_PIN_PC3 };
-static struct at91_spi_platform_data spi_pdata = {
- .chipselect = spi0_standard_cs,
- .num_chipselect = ARRAY_SIZE(spi0_standard_cs),
-};
-
-static void ek_add_device_spi(void)
-{
- spi_register_board_info(ek_spi_devices, ARRAY_SIZE(ek_spi_devices));
- at91_add_device_spi(0, &spi_pdata);
-}
-#else
-static void ek_add_device_spi(void) {}
-#endif
-
-#ifdef CONFIG_LED_GPIO
-struct gpio_led leds[] = {
- {
- .gpio = AT91_PIN_PE28,
- .active_low = 0,
- .led = {
- .name = "d8",
- },
- }, {
- .gpio = AT91_PIN_PE9,
- .active_low = 1,
- .led = {
- .name = "d9",
- },
- }, {
- .gpio = AT91_PIN_PE8,
- .active_low = 0,
- .led = {
- .name = "d10",
- },
- },
-};
-
-static void ek_add_led(void)
-{
- int i;
-
- for (i = 0; i < ARRAY_SIZE(leds); i++) {
- at91_set_gpio_output(leds[i].gpio, leds[i].active_low);
- led_gpio_register(&leds[i]);
- }
- led_set_trigger(LED_TRIGGER_HEARTBEAT, &leds[0].led);
-}
-#else
-static void ek_add_led(void) {}
-#endif
-
-static int sama5d4ek_mem_init(void)
-{
- at91_add_device_sdram(0);
-
- return 0;
-}
-mem_initcall(sama5d4ek_mem_init);
-
-static const struct devfs_partition sama5d4ek_nand0_partitions[] = {
- {
- .offset = 0x00000,
- .size = SZ_256K,
- .flags = DEVFS_PARTITION_FIXED,
- .name = "at91bootstrap_raw",
- .bbname = "at91bootstrap",
- }, {
- .offset = DEVFS_PARTITION_APPEND,
- .size = SZ_512K,
- .flags = DEVFS_PARTITION_FIXED,
- .name = "bootloader_raw",
- .bbname = "bootloader",
- }, {
- .offset = DEVFS_PARTITION_APPEND,
- .size = SZ_256K,
- .flags = DEVFS_PARTITION_FIXED,
- .name = "env_raw",
- .bbname = "env0",
- }, {
- .offset = DEVFS_PARTITION_APPEND,
- .size = SZ_256K,
- .flags = DEVFS_PARTITION_FIXED,
- .name = "env_raw1",
- .bbname = "env1",
- }, {
- /* sentinel */
- }
-};
-
-static int sama5d4ek_devices_init(void)
-{
- ek_add_device_i2c();
- ek_add_device_nand();
- ek_add_led();
- ek_add_device_eth();
- ek_add_device_spi();
- ek_add_device_mci();
- ek_add_device_lcdc();
-
- devfs_create_partitions("nand0", sama5d4ek_nand0_partitions);
-
- return 0;
-}
-device_initcall(sama5d4ek_devices_init);
-
-static int sama5d4ek_console_init(void)
-{
- barebox_set_model("Atmel sama5d4ek");
- barebox_set_hostname("sama5d4ek");
-
- at91_register_uart(4, 0);
-
- return 0;
-}
-console_initcall(sama5d4ek_console_init);
-
-static int sama5d4ek_main_clock(void)
-{
- at91_set_main_clock(12000000);
-
- return 0;
-}
-pure_initcall(sama5d4ek_main_clock);
diff --git a/arch/arm/configs/sama5d4_xplained_defconfig b/arch/arm/configs/sama5d4_xplained_defconfig
deleted file mode 100644
index 90a45b97c2..0000000000
--- a/arch/arm/configs/sama5d4_xplained_defconfig
+++ /dev/null
@@ -1,84 +0,0 @@
-CONFIG_TEXT_BASE=0x26f00000
-CONFIG_ARCH_AT91=y
-CONFIG_ARCH_SAMA5D4=y
-CONFIG_MACH_SAMA5D4_XPLAINED=y
-CONFIG_AEABI=y
-CONFIG_ARM_OPTIMZED_STRING_FUNCTIONS=y
-CONFIG_MMU=y
-CONFIG_BAREBOX_MAX_IMAGE_SIZE=0x60000
-CONFIG_MALLOC_SIZE=0xA00000
-CONFIG_EXPERIMENTAL=y
-CONFIG_MALLOC_TLSF=y
-CONFIG_PROMPT="A5D4_XPLAINED:"
-CONFIG_PROMPT_HUSH_PS2="y"
-CONFIG_HUSH_FANCY_PROMPT=y
-CONFIG_CMDLINE_EDITING=y
-CONFIG_AUTO_COMPLETE=y
-CONFIG_BOOTM_SHOW_TYPE=y
-CONFIG_BOOTM_VERBOSE=y
-CONFIG_BOOTM_INITRD=y
-CONFIG_BOOTM_OFTREE=y
-CONFIG_BOOTM_OFTREE_UIMAGE=y
-CONFIG_CONSOLE_ACTIVATE_ALL=y
-CONFIG_DEFAULT_ENVIRONMENT_GENERIC_NEW=y
-CONFIG_DEFAULT_ENVIRONMENT_PATH="arch/arm/boards/sama5d4_xplained/env"
-# CONFIG_CMD_ARM_CPUINFO is not set
-CONFIG_LONGHELP=y
-CONFIG_CMD_MEMINFO=y
-# CONFIG_CMD_BOOTU is not set
-CONFIG_CMD_GO=y
-CONFIG_CMD_LOADB=y
-CONFIG_CMD_RESET=y
-CONFIG_CMD_UIMAGE=y
-CONFIG_CMD_PARTITION=y
-CONFIG_CMD_EXPORT=y
-CONFIG_CMD_LOADENV=y
-CONFIG_CMD_PRINTENV=y
-CONFIG_CMD_MAGICVAR=y
-CONFIG_CMD_MAGICVAR_HELP=y
-CONFIG_CMD_SAVEENV=y
-CONFIG_CMD_FILETYPE=y
-CONFIG_CMD_SLEEP=y
-CONFIG_CMD_DHCP=y
-CONFIG_CMD_MIITOOL=y
-CONFIG_CMD_PING=y
-CONFIG_CMD_TFTP=y
-CONFIG_CMD_ECHO_E=y
-CONFIG_CMD_EDIT=y
-CONFIG_CMD_SPLASH=y
-CONFIG_CMD_READLINE=y
-CONFIG_CMD_TIMEOUT=y
-CONFIG_CMD_FLASH=y
-CONFIG_CMD_GPIO=y
-CONFIG_CMD_SPI=y
-CONFIG_CMD_OFTREE=y
-CONFIG_NET=y
-CONFIG_NET_NFS=y
-CONFIG_OFDEVICE=y
-CONFIG_DRIVER_NET_MACB=y
-CONFIG_MICREL_PHY=y
-CONFIG_DRIVER_SPI_ATMEL=y
-CONFIG_I2C=y
-CONFIG_I2C_GPIO=y
-CONFIG_MTD=y
-CONFIG_MTD_RAW_DEVICE=y
-CONFIG_MTD_M25P80=y
-CONFIG_NAND=y
-CONFIG_NAND_ATMEL=y
-CONFIG_NAND_ATMEL_PMECC=y
-CONFIG_VIDEO=y
-CONFIG_DRIVER_VIDEO_ATMEL_HLCD=y
-CONFIG_MCI=y
-CONFIG_MCI_STARTUP=y
-CONFIG_MCI_ATMEL=y
-CONFIG_LED=y
-CONFIG_LED_GPIO=y
-CONFIG_LED_TRIGGERS=y
-CONFIG_KEYBOARD_GPIO=y
-CONFIG_KEYBOARD_QT1070=y
-CONFIG_FS_EXT4=y
-CONFIG_FS_TFTP=y
-CONFIG_FS_FAT=y
-CONFIG_FS_FAT_WRITE=y
-CONFIG_FS_FAT_LFN=y
-CONFIG_PNG=y
diff --git a/arch/arm/configs/sama5d4ek_defconfig b/arch/arm/configs/sama5d4ek_defconfig
deleted file mode 100644
index ba06991c4a..0000000000
--- a/arch/arm/configs/sama5d4ek_defconfig
+++ /dev/null
@@ -1,83 +0,0 @@
-CONFIG_TEXT_BASE=0x26f00000
-CONFIG_ARCH_AT91=y
-CONFIG_ARCH_SAMA5D4=y
-CONFIG_AEABI=y
-CONFIG_ARM_OPTIMZED_STRING_FUNCTIONS=y
-CONFIG_MMU=y
-CONFIG_BAREBOX_MAX_IMAGE_SIZE=0x60000
-CONFIG_MALLOC_SIZE=0xA00000
-CONFIG_EXPERIMENTAL=y
-CONFIG_MALLOC_TLSF=y
-CONFIG_PROMPT="A5D4EK:"
-CONFIG_PROMPT_HUSH_PS2="y"
-CONFIG_HUSH_FANCY_PROMPT=y
-CONFIG_CMDLINE_EDITING=y
-CONFIG_AUTO_COMPLETE=y
-CONFIG_BOOTM_SHOW_TYPE=y
-CONFIG_BOOTM_VERBOSE=y
-CONFIG_BOOTM_INITRD=y
-CONFIG_BOOTM_OFTREE=y
-CONFIG_BOOTM_OFTREE_UIMAGE=y
-CONFIG_CONSOLE_ACTIVATE_ALL=y
-CONFIG_DEFAULT_ENVIRONMENT_GENERIC_NEW=y
-CONFIG_DEFAULT_ENVIRONMENT_PATH="arch/arm/boards/sama5d4ek/env"
-# CONFIG_CMD_ARM_CPUINFO is not set
-CONFIG_LONGHELP=y
-CONFIG_CMD_MEMINFO=y
-# CONFIG_CMD_BOOTU is not set
-CONFIG_CMD_GO=y
-CONFIG_CMD_LOADB=y
-CONFIG_CMD_RESET=y
-CONFIG_CMD_UIMAGE=y
-CONFIG_CMD_PARTITION=y
-CONFIG_CMD_EXPORT=y
-CONFIG_CMD_LOADENV=y
-CONFIG_CMD_PRINTENV=y
-CONFIG_CMD_MAGICVAR=y
-CONFIG_CMD_MAGICVAR_HELP=y
-CONFIG_CMD_SAVEENV=y
-CONFIG_CMD_FILETYPE=y
-CONFIG_CMD_SLEEP=y
-CONFIG_CMD_DHCP=y
-CONFIG_CMD_MIITOOL=y
-CONFIG_CMD_PING=y
-CONFIG_CMD_TFTP=y
-CONFIG_CMD_ECHO_E=y
-CONFIG_CMD_EDIT=y
-CONFIG_CMD_SPLASH=y
-CONFIG_CMD_READLINE=y
-CONFIG_CMD_TIMEOUT=y
-CONFIG_CMD_FLASH=y
-CONFIG_CMD_GPIO=y
-CONFIG_CMD_SPI=y
-CONFIG_CMD_OFTREE=y
-CONFIG_NET=y
-CONFIG_NET_NFS=y
-CONFIG_OFDEVICE=y
-CONFIG_DRIVER_NET_MACB=y
-CONFIG_MICREL_PHY=y
-CONFIG_DRIVER_SPI_ATMEL=y
-CONFIG_I2C=y
-CONFIG_I2C_GPIO=y
-CONFIG_MTD=y
-CONFIG_MTD_RAW_DEVICE=y
-CONFIG_MTD_M25P80=y
-CONFIG_NAND=y
-CONFIG_NAND_ATMEL=y
-CONFIG_NAND_ATMEL_PMECC=y
-CONFIG_VIDEO=y
-CONFIG_DRIVER_VIDEO_ATMEL_HLCD=y
-CONFIG_MCI=y
-CONFIG_MCI_STARTUP=y
-CONFIG_MCI_ATMEL=y
-CONFIG_LED=y
-CONFIG_LED_GPIO=y
-CONFIG_LED_TRIGGERS=y
-CONFIG_KEYBOARD_GPIO=y
-CONFIG_KEYBOARD_QT1070=y
-CONFIG_FS_EXT4=y
-CONFIG_FS_TFTP=y
-CONFIG_FS_FAT=y
-CONFIG_FS_FAT_WRITE=y
-CONFIG_FS_FAT_LFN=y
-CONFIG_PNG=y
diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig
index 0e89916c9c..b68a9f4e25 100644
--- a/arch/arm/mach-at91/Kconfig
+++ b/arch/arm/mach-at91/Kconfig
@@ -541,42 +541,6 @@ endchoice
endif
-# ----------------------------------------------------------
-
-if ARCH_SAMA5D3
-
-choice
- prompt "SAMA5D3 Board Type"
-
-config MACH_SAMA5D3XEK
- bool "Atmel SAMA5D3X Evaluation Kit"
- help
- Select this if you are using Atmel's SAMA5D3X-EK Evaluation Kit.
-
-endchoice
-
-endif
-
-# ----------------------------------------------------------
-
-if ARCH_SAMA5D4
-
-choice
- prompt "SAMA5D4 Board Type"
-
-config MACH_SAMA5D4EK
- bool "Atmel SAMA5D4 Evaluation Kit"
- help
- Select this if you are using Atmel's SAMA5D4-EK Evaluation Kit.
-
-config MACH_SAMA5D4_XPLAINED
- bool "Atmel SAMA5D4 XPLAINED ULTRA Evaluation Kit"
- help
- Select this if you are using Atmel's SAMA5D4_XPLAINED ULTRA Evaluation Kit.
-
-endchoice
-
-endif
endif
# ----------------------------------------------------------
--
2.39.2
More information about the barebox
mailing list